• 한국항공우주학회지
• /
• 제36권10호
• /
• pp.1017-1025
• /
• 2008

본 연구에서는 무인항공기의 대기속도 및 압력고도를 측정하는 공력자료시스템(ADS)을 개발하였다. ADS는 비행제어시스템에 항공기 속도와 고도를 제공함으로써 실속속도 이하에서의 비행을 막고 고도유지 비행을 가능하게 하는 시스템이다. 무인항공기의 속도와 고도를 정확하게 측정하는 것은 비행성능을 확인하고 항공기의 안전성을 보장하기 위한 중요한 부분이다. 본 논문에서 개발된 ADS는 MEMS 압력센서, 저역통과필터, 마이크로 컨트롤러 그리고 피토튜브로 구성되어 있다. 온도보정과 압력보정을 통해 ADS 데이터의 오차를 줄였으며 비행시험에서 GPS 데이터와 ADS 데이터를 비교하였다.

• 한국대기환경학회지
• /
• 제19권1호
• /
• pp.25-31
• /
• 2003

Ceramic filter has been demonstrated as an attractive system to improve the thermal efficiency and to reduce the effluent pollutants. Removal of particulates from the hot gas stream is very important in air pollution control. In particular, the elimination of the particulate matters discharged from a gas turbine at high temperature can prevent the corrosion inside the IGCC. In this study, a Lab. scale test and numerical simulation were carried out to comprehend the relationship between pulse jet pressure and recovery of pressure drop and to characterize the reverse cleaning flow through a ceramic fil-ter element under high temperature and high pressure. When the pulse-jet pressures were 2, 3 and 4 kg/$ extrm{cm}^2$, the cleaning effect increase of about 10~30% by recovery of pressure drop caused by pulse pressure. Cleaning effect at 45$0^{\circ}C$ was greater than that at 55$0^{\circ}C$ or 650$^{\circ}$ for the same pulse pressure. According to the result of the present simulation, high pressure has been formed in terminal and central regions in our models and temperature distribution caused by pulse air is to be uniform comparatively on inner surface of filter.

• 한국추진공학회지
• /
• 제10권2호
• /
• pp.39-45
• /
• 2006

로켓 엔진 터보펌프용 터빈은 고온, 고압의 연소가스를 사용하기 때문에 실제 환경에서 성능시험을 수행하기가 매우 어렵다. 따라서 대부분의 경우, 시험에 따르는 위험을 줄이기 위하여 공기를 사용한 시험을 통하여 성능을 평가한다. 본 논문에서는 10 톤급 액체로켓엔진 터보펌프용 터빈에 대한 공기 상사 성능시험에 대하여 기술하였다. 터빈의 공기역학적인 성능을 평가하기 위한 성능시험설비를 구성하였으며, 성능시험설비는 고압공기 공급시스템, 유량측정용 노즐, 시험부, 동력계. 압력조절을 위한 출구 오리피스 그리고 측정 및 제어 시스템으로 구성된다. 본 논문에서는 터빈성능 시험을 위한 상사시험 조건을 결정하는 방법과 시험조건을 조절하는 방법에 대하여 기술하였다. 시험결과, 측정 변수들의 상대 표준오차는 1%이내였으며 측정된 터빈 효율은 해석결과와 2% 이내로 일치하였다.

• 수산해양기술연구
• /
• 제52권1호
• /
• pp.65-71
• /
• 2016

Injection rate, injection quantity and injection timing of fuel are controlled precisely by electric control in CRDI system. Particularly, injection rate being influenced with injection pressure affects to spray characteristics and fuel-air ratio, so it is a very important factor in diesel combustion. In this study, injection rates in accordance with injection pressure at a constant ambient pressure were measured with Zeuch's method. Under the same condition, non-evaporating spray images were taken with a high speed camera and analyzed carefully with Adobe Photoshop CS3. Macroscopic spray characteristics and breakup processes in the spray could be found from the examined and analyzed data. Injection start time and injection period were practically affected with injection pressure. Also, initial injection rate, spray penetration, spray angle and breakup of high density droplets region in the spray were affected with injection pressure. The results and techniques of spray visualization and injection rate measurement in this study would be practically effective to study a high pressure diesel spray for common rail direct injection system.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1780-1786
• /
• 1995

The main goal of the present study is to establish the techniques and methodolgies of turbine performance test through evaluating the objective turbine test piece, and checking the reliability of the self-developed test facility by performing a series of turbine tests under ambient temperature condition. A high speed coupling, a lubrication system and a test bed of the test facility were modified through a series of preliminary test in order to reduce the vibration and oil leakage. The flowrate control of the test facility and data acquisition were accomplished by using a software called "Labview" The measurement of shaft horse power and control of rotational speed according to the conditions of turbine rotation were performed by a separate system. The preliminary evaluation of the measured data suggests that the developed test facility and the test technique can be used reliably for the performance test of turbines with the minor improvement.provement.

• 조명전기설비학회논문지
• /
• 제29권11호
• /
• pp.53-58
• /
• 2015

Systemic heating and cooling air conditioning systems are popular in various industrial fields and even home. Recently, the rate of supply of this kind of multi-heat pump has been increased under ESCO financing supporting system. Generally the heat pumping system has a structural simplicity and easy installation benefits. and has good running efficiency under normal designed condition. But under extreme climate condition (over $+30^{\circ}C$, under $-10^{\circ}C$), this system exposes abnormal power consumption. It causes high progressive electric power rates and resultant peak power capacity of power plant. In this paper, a novel system concept of buffering refrigerant accumulator and constant pressure control system to relieve peak power load is proposed and this system's utility is verified with an prototype experimental system.

• 설비공학논문집
• /
• 제21권2호
• /
• pp.103-108
• /
• 2009

Local exhaust system used in toilet and cooking place of low-rise public house installed roof ventilator at terminal of stack. There are many high riser public houses in Korea. These buildings were not viewed as being major contributors to exhaust pollutants producted in indoor. It was because many engineers thought that exhaust in high riser public house depends on stack effect. But Neutral pressure level represents in a terminal of stack with air tightness for the best exhaust efficiency. Thereby, lower floors have the worst indoor air quality. This paper focuses mainly on the exhaust efficiency improved by roof fan with motor installed in high riser public house. It is observed there is higher exhaust efficiency than the existing natural roof ventilator.

• 생물환경조절학회지
• /
• 제14권3호
• /
• pp.218-231
• /
• 2005

본고에서는 우주에서 장기간에 걸쳐 임무를 수행하는 인간의 생명지원을 목적으로 CELSS를 이용한 식물생산, 물과 공기의 정화 및 재생, 폐기물 처리 등을 위한 공학적 접근을 검토하였다. 이러한 공학적 접근에는 미소중력 또는 저압과 같은 우주 환경에 적용 가능한 폐쇄형 식물생산 시스템, 물질 순환, 물의 재생, 폐기물의 처리, 미량 유해가스의 제거, 조명, 배양액의 공급 등이 포함된다. 우주에서 재배 가능한 작물의 선택 기준으로 높은 생산성, 식용성, 소화성, 조리성, 자동화 가능성, 짧은 줄기, 높은 증산속도 등이 제기되고 있다. 화성 표면에서의 낮은 압력은 작물 생산용 온실을 설계할 때 주요 장애물에 해당한다. 때문에 저압하에서 식물 재배가 가능한 팽창식 온실의 개발에 관심이 집중되고 있다. 팽창식 온실의 구조, 내부 압력, 자재, 조명 방식, 방사선 차폐 등은 주요 설계 인자에 해당한다. 팽창식 온실 내의 낮은 압력은 구조물의 질량과 가스의 누출속도를 줄일 수 있다. 저압 조건에서는 증산속도가 급격하게 증가하여 식물의 수분요구도가 높게 나타난다. 증산 또는 수경재배시스템으로부터의 증발에 의해서 수분이 대기 중으로 방출될 때 증기압이 증가한다. 저압 조건에 있는 폐쇄계에서는 증기압의 변화가 전체 압력에 커다란 영향을 미친다. 그러므로 저압 조건의 수경재배시스템은 누수로 인하여 기화되는 수분 손실을 줄이기 위해서 고도로 밀폐되어야 한다. 또한 저압으로 유지되는 온실내의 상대습도를 높게 유지할 수 있는 환경제어 기술이 개발되어야 한다. 향후 폐쇄생태계 생명유지 시스템의 핵심 기술은 우주뿐만 아니라 지구상의 사막, 극지방 또는 해저와 같은 열악한 환경 조건에서도 생명 지원을 가능케 할 것이다.

• 한국기계가공학회지
• /
• 제19권3호
• /
• pp.51-56
• /
• 2020

Research into natural refrigerants that use CO₂, instead of chlorofluorocarbons and hydrofluorocarbons, has increased due to the environmental problems caused by ozone depletion. CO₂ refrigerants are more environmentally friendly than conventional refrigerants because they have better latent heat of evaporation and heat transfer efficiency properties. However, they have very low critical temperatures and require high design pressures; therefore, pressure control valves, which reduce the pressure of the CO₂ refrigerant to a safe level and apply it to the refrigerant air conditioning system, are necessary to secure stability against high pressure. In the present study, we evaluated the flow characteristics and valve performance of the pressure control valve using a CO₂ refrigerant by measuring the pressure, velocity, and flow coefficient. In addition, we examined the applied forces caused by the internal pressure from the highly pressurized CO₂ refrigerant and required thrust characteristics.

• 대한기계학회논문집B
• /
• 제29권9호
• /
• pp.1006-1012
• /
• 2005

The effects of premixed fuels(diesel or n-heptane) and exhaust gas recirculation on combustion and exhaust emission characteristics in a DI diesel engine were experimentally investigated. To improve homogeneity of fuel-air mixture in the conventional diesel engine, the premixed fuel is injected by high pressure(5.5 MPa) into the premixing chamber prior to engine cylinder, And several additional systems such as an EGR system, air heating system and back pressure control system were equipped in the DI diesel engine. The results showed that premixed fuel-air mixture undergoes typical HCCI combustion prior to the combustion of DI diesel fuel. The ignition timing of HCCI combustion is delayed by application of EGR, and it also shows that HCCI combustion can be controlled by an EGR.