• Journal of Mechanical Science and Technology
• /
• v.18 no.4
• /
• pp.630-639
• /
• 2004

The Stewart platform manipulator is a closed-kinematics chain robot manipulator that is capable of providing high structural rigidity and positional accuracy. However, this is a complex and nonlinear system, so the control performance of the system is not so good. In this paper, a new robust motion control algorithm is proposed. The algorithm uses partial state feedback for a class of nonlinear systems with modeling uncertainties and external disturbances. The major contribution is the design of a robust observer for the state and the perturbation of the Stewart platform, which is combined with a variable structure controller (VSC). The combination of controller and observer provides the robust routine called sliding mode control with sliding perturbation observe. (SMCSPO). The optimal gains of SMCSPO, which is determined by nominal eigenvalues, are easily obtained by genetic algorithm. The proposed fitness function that evaluates the gain optimization is to put sliding function. The control performance of the proposed algorithm is evaluated by the simulation and experiment to apply to the Stewart platform. The results showed high accuracy and good performance.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.3
• /
• pp.244-250
• /
• 2002

This paper proposed a modified observer based on Busawon's high gain observer using an appropriate time depended function, which can be chosen to make each estimated state converge faster to its real value. The stability of the modified observer is proved by using Lyapunov function. The modified nonlinear observer is applied to estimate the states in stirred tank bioreactor: out-put substrate concentration, output biomass concentration and the specific growth rate of the process. The convergences of the modified observer and Busawon's observer are compared trough simulation results. As the results, the modified observer converges faster to its real value than the well-known Busawon's observer.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.2
• /
• pp.80-86
• /
• 2001

We design a sliding mode cascade observer to estimate derivatives of the output. In the 1st step of the observer, the output will be estimated, and the 1st order derivative of the output will be estimated via the 2nd step of the observer. Also, nth order derivative of the output will be estimated in the n+1th step of the observer. Exponential convergence of the estimation errors is shown under the bounded initial condition. Numerical examples will be presented to show the validity of the proposed observer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.261-262
• /
• 2012

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.1
• /
• pp.1-8
• /
• 1997

In order to reject the steady-state tracking error, it is common to introduce integral compensators in servosystems for constant reference signals. However, if the mathematical model of the plant is exact and no disturbance input exists, the integral compensation is not necessary. From this point of view, a two-degree-of-freedom(2DOF) servosystem has been proposed, in which the integral compensation is effective only when there is a modeling error or a disturbance input. The present paper considers robust stability of this 2DOF servosystem incorporating an observer to the structured and unstructured uncertainties of the controlled plant. A robust stability condition is obtained using Riccati inequality, which is written in a linear matrix inequality (LMI) and independent of the gain of the integral compensator. This result impies that if the plant uncertainty is in the allowable set defined by the LMI condition, a high-gain integral compensation can be carried preserving robust stability to accelerate the tracking response.

• The Journal of Korea Robotics Society
• /
• v.17 no.2
• /
• pp.221-229
• /
• 2022

Sliding mode control (SMC) is a robust control method to control a robot arm with nonlinear properties. A high switching gain of SMC causes chattering problems, although the SMC allows the adequate control performance by giving high switching gain, without the exact robot model containing nonlinear and uncertainty terms. In order to solve this problem, SMC with sliding perturbation observer (SMCSPO) has been researched, where the method can reduce the chattering by compensating the perturbation, which is estimated by the observer, and then choosing a lower switching control gain of SMC. However, optimal gain tuning is necessary to get a better tracking performance and reducing a chattering. This paper proposes a method that the Q-learning automatically tunes the control gains of SMCSPO with an iterative operation. In this tuning method, the rewards of reinforcement learning (RL) are set minus tracking errors of states, and the action of RL is a change of control gain to maximize rewards whenever the iteration number of movements increases. The simple motion test for a 7-DOF robot arm was simulated in MATLAB program to prove this RL tuning algorithm. The simulation showed that this method can automatically tune the control gains for SMCSPO.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.1
• /
• pp.7-14
• /
• 2015

To implement an automatic picking system (APS) in distribution center with high precision and high dynamics, this paper presents a high gain observer-based robust speed controller design for a linear induction motor (LIM) drive. The force disturbance as well as the mechanical parameter variations such as the mass and friction coefficient gives a direct influence on the speed control performance of APS. To guarantee a robust control performance, the system uncertainty caused by the force disturbance and mechanical parameter variations is estimated through a high gain disturbance observer and compensated by a feedforward manner. While a time-varying disturbance due to the mass variation can not be effectively compensated by using the conventional disturbance observer, the proposed scheme shows a robust performance in the presence of such uncertainty. A Simulink library has been developed for the LIM model from the state equation. Through comparative simulations based on Matlab - Simulink, it is proved that the proposed scheme has a robust control nature and is most suitable for APS.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.3
• /
• pp.173-179
• /
• 2004

A synthesis method of the reduced-order extended Luenberger observer (ROELO) and its design procedure for a nonlinear dynamic system are presented. This paper proposes a method to reduce the order of the observer and to ! elect the observer gain matrix. The proposed algorithm is applied for high performance induction motor drives without a speed sensor The simulation and experiment results show that the proposed ROELO provides both rotor flux and rotor speed estimation with good performance.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.213-218
• /
• 2007

We consider a web transport system. The objective of this paper is to design the output feedback controller such that the controller can track a desired tension and processing speed on web transport system. We propose the new design method using observer and feedback linearization technique. The proposed method use a nonlinear feedback to transform to linear system and high gain observer to estimate the state value. We show that the proposed controller can achieve the control object using only output. We show a performance of controller via the simulation.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1187-1193
• /
• 2011

In this paper, proposed controller preventing compressor surge and reducing the acceleration time of the fuel flow control system for turbo-jet engine. Turbo-jet engine controller is designed by applying fuzzy PID control algorithm and high-gain observer. Observer is used to estimate to compressor rotation speed of turbo-jet engine. Result of fuzzy inference is used as the fuel flow control inputs for preventing compressor surge and flame-out in turbo-jet engine. The controller is designed to converge to the desired speed quickly and safely. Using MATLAB to perform computer simulations verified the performance of the proposed controller.