• 콘크리트학회논문집
• /
• 제18권6호
• /
• pp.811-817
• /
• 2006

본 연구에서는 지하식 LNG 저장탱크의 지하연속벽에 사용되는 병용계 고유동 콘크리트의 시공 품질 및 보증강도 평가를 정리한 것이다. 일반적으로 지하연속벽에 사용되는 고유동 콘크리트의 배합강도는 높은 할증계수와 낮은 수중 콘크리트의 저감계수를 적용하기 때문에, 매우 비경제적인 배합설계가 된다. 이를 구명하기 위한 방안으로 현장에서 실시한 병용계 고유동 콘크리트의 시공 품질과 보증강도를 평가하여 이에 적합한 배합강도 산정식을 제안하고자 하였다. 연구 결과, 최적배합조건은 물-시멘트비 51%, 잔골재율 48.8%, 그리고 석회석 미분말을 시멘트의 중량비로 42.6% 치환한 것으로 선정하였다. 또한, 현장 적용 결과를 분석해 보면, 슬럼프 플로우에 대한 시공 품질 시험 결과 평균 616~634mm이고 500mm 플로우 도달시간은 평균 6.3초, 공기량은 평균 4.0%로 관리기준을 만족하였다. 표준양생 공시체의 압축강도에 대한 시공 품질 시험 결과, 평균 49.9MPa를 나타내었고 표준편차는 1.66MPa, 변동계수는 3.36%로 매우 낮았다. 코어 공시체의 압축강도는 평균 66.4MPa를 나타내었고, 표준편차는 3.64Pa, 변동계수는 5.48%로 나타났다. 표준양생 공시체와 코어 공시체의 보증강도비는 1.23 및 1.32로 나타났다. 기존에 배합강도를 산정하기 위하여 적용한 할증계수 및 저감계수가 매우 안정적인 것으로 나타났다. 본 연구에서는 이러한 결과를 통해 지하연속벽에 사용되는 병용계 고유동 콘크리트의 배합강도 산정에 있어서 변동계수 7%, 할증계수 1.13 및 수중 콘크리트의 강도저감 계수를 0.98로 제안하였다.

• Advances in concrete construction
• /
• 제8권1호
• /
• pp.65-76
• /
• 2019

This paper investigates the effect of recycled glass powder (RGP) on flowing properties of self-compacting mortars (SCMs) containing different ratios of fillers and superplasticizer dosages. Fly ash (FA), nano-silica (NS), micro-silica (MS), metakaolin (MK) and rice husk ash (RHA) are used as fillers and their synergistic effect with RFP is studied. The effects of fillers and high-range water reducer (HRWR) on flowing ability of mortars are primarily determined by slump flow and V-funnel flow time tests. The results showed that for composites with a higher RGP content, the mortar flowing ability increased but tended to decrease when the composites containing 10% MK or 5% RHA. However, the flowing ability of samples incorporating 5% RGP and 10% SF or 25% FA showed an opposite result that their slump flow spread decreased and then increased with increasing RGP content. For specimens with 3% NS, the influence of RGP content on flowing properties was not significant. Except RHA and MS, the fillers studied in this paper could reduce the dosage of HRWR required for achieving the same followability. Also, the mixture parameters were determined and indicated that the flowability of mixtures was also affected by the content of sand and specific surface area of cement materials. It is believed that excess fine particles provided ball-bearing effect, which could facilitate the movement of coarse particles and alleviate the interlocking action among particles. Also, it can be concluded that using fillers in conjunction with RGP as cementitious materials can reduce the material costs of SCM significantly.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.257-258
• /
• 2010

본 연구는 매스 콘크리트의 수화열 저감을 위해 혼화재를 다량 치환한 사용한 배합(LHC)에 대하여 실험을 실시하였으며, 그 결과는 다음과 같다. 동일 유동성을 만족하기 위한 감수제량은 약 50% 정도 감소하였으며, 압축강도는 OPC의 약 95% 정도를 발현하였다. 또한 수화열에 의한 온도상승은 OPC 및 FA25에 비해 36~48% 저하하는 것으로 나타나 매스 콘크리트의 수화열 저감에 큰 효과가 있을 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.349-352
• /
• 2008

본 연구는 보통강도(30MPa) 고유동 자기충전 콘크리트를 구조체에 적용하기 위하여 두개의 철근콘크리트 보(고유동 자기충전 콘크리트 실험체, 일반 콘크리트 실험체)를 제작하여 4점 재하실험을 수행하고, 고유동 자기충전 콘크리트와 일반 콘크리트의 휨 거동 특성을 비교 분석 하였다. 실험 결과 모든 실험체는 휨에 의해 연성적인 파괴양상을 보였다. 고유동 자기충전 콘크리트와 일반 콘크리트 실험체의 강성 및 연성은 유사한 거동을 보였으나, 고유동 자기충전 콘크리트가 일반 콘크리트에 비해 균열제어 효과가 뛰어난 것으로 나타났다. 이상의 결과로 고유동 자기충전 콘크리트는 현장 적용이 가능할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.329-332
• /
• 1999

The crack of concrete induced by the heat of hydration is a serious problem, particularly in concrete structures such as underground box structure, mat-slab of nuclear reactor buildings, dams or large footings, foundations of high rise buildings, etc.. As a result of the temperature rise and restriction condition of foundation, the thermal stress which may induce the cracks can occur. Therefore the various techniques of the thermal stress control in massive concrete have been widely used. One of them is prediction of the thermal stress, besides low-heat cement which mitigates the temperature rise, pre-cooling which lowers the initial temperature of fresh concrete with ice flake, pipe cooling which cools the temperature of concrete with flowing water, design change which considers steel bar reinforcement, operation control and so on. The objective of this paper is largely two folded. Firstly we introduce the cracks control technique by employing low-heat cement mix and thermal stress analysis. Secondly it show the application condition of the cracks control technique like sidewall of LNG in Inchonl.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.293-298
• /
• 1999

The crack of concrete induced by the heat of hydration is a serious problem, particularly in concrete structures such as underground box structure, mat-slab of nuclear reactor buildings, dams or large footings, foundations of high rise buildings, etc.. As a result of the temperature rise and restriction condition of foundation, the thermal stress which may induce the cracks can occur. Therefore the various techniques of the thermal stress control in massive concrete have been widely used. One of them is prediction of the thermal stress, besides low-heat cement which mitigates the temperature rise, pre-cooling which lowers the initial temperature of fresh concrete with ice flake, pipe cooling which cools the temperature of concrete with flowing water, design change which considers steel bar reinforcement, operation control and so on. The objective of this paper is largely two folded. Firstly we introduce the cracks control technique by employing low-heat cement mix and thermal stress analysis. Secondly it show the application condition of the cracks control technique like the subway structure in Seoul.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.584-587
• /
• 2004

This research investigates the rheological behavior and the confined water ratio of the cement paste and binder condition in order to predict mix design proportion of the high flowing concrete. The purpose of this study is to determine the optimum replacement ratio of binders including fly ash, and lime stone powder by the cement weight. For this purpose, belite cement, blast furnace slag cement and ordinary portland cement are selected. As test results, the confined water ratio shows the following range ; OPC>blast furnace slag cement>belite cement. Therefore, belite cement is proved very excellent cementitious materials in a view point of the flowability. The optimum replacement ratio of lime stone powder is shown over $30\%$ in case of belite cement and about $10\%$ in case of slag cement type. Also, the optimum replacement ratio of fly ash is shown $30\%$ by the cement weight considering the confined water ratio and deformable coefficient of the paste condition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.51-56
• /
• 1998

The purpose of this study is to investigate and analyze the fluidity and rheology property of superplasticizer which is necessary using for high flowing concrete fluidity establishment, by changing the substitutional ratio of 6 kinds, and examined the fluidity and rheology properties as time goes by. In the result of this study, the fluidity and rheology properties are differently found and on the effects of admixture for the fluidity, F type is superior and A type is lower than others. Besides, F type is the mose superior values in the time goings.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.45-50
• /
• 1998

This study is aimed for investigating the rheology property and fluidity of superplasticizer which is necessary using for high flowing concrete fluidity establishment. Therefore, this study is analysis the rheology property and fluidity by different according temperature and elapsed time. From the results, the fluidity and rheology value were different according temperature. Over 2$0^{\circ}C$, the flow value of A, B, C, D, E type is increased, according as the increase of temperature, but the flow value of F type is decreased.

• 한국건축시공학회지
• /
• 제5권2호
• /
• pp.131-138
• /
• 2005

Most concrete is recently made of an aggregate which is properly absorbed, and carried in it in order to do capability at every fields. We have been close to demand new rapability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high quality aggregate. Therefore, For solving the problems we apply to a packing method for using dried materials. That is to say that it is a kind of making into an instant. In this study. There is a purpose to present fundamental data, comparing and analyzing a phenomenon of aggregate's absorption following the rate of adding water, for using existing materials.