• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.48-64
• /
• 2019

With evolution in the production environment of the textile industry, the need for non-water-based dyeing technologies and eco-friendly process facilities in the dyeing and processing stages has increased. In recent years, supercritical fluid dyes have been developed and commercialized in Europe, centering on this demand. However, so far, such dyes have been mainly applied in the processing of PET fibers. Basic research has mainly involved investigation of dyeing by supercritical carbon dioxide or solubility of such dyes, and more in-depth research should be continuously carried out. In this review, we describe the types and characteristics of supercritical fluids that exhibit specific properties at pressures and temperatures over the critical point. In addition, the state of the art in the dyeing and processing technology using supercritical fluids and associated, processing problems, environmental regulation, and wastewater treatment issues are described in detail. We hope this review can contribute to the supercritical fluid technology being further developed as an environment friendly dyeing processing method. Furthermore, we expect that the technique can be used as a means of ensuring different, high-quality dyed products.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.7
• /
• pp.1044-1051
• /
• 2019

Objective: Recent studies have implied that gene expression has high tissue-specificity, and therefore it is essential to investigate gene expression in a variety of tissues when performing the transcriptomic analysis. In addition, the gradual increase of long non-coding RNA (lncRNA) annotation database has increased the importance and proportion of mapped reads accordingly. Methods: We employed simple statistical models to detect the sexually biased/dimorphic genes and their conjugate lncRNAs in 40 RNA-seq samples across two factors: sex and tissue. We employed two quantification pipeline: mRNA annotation only and mRNA+lncRNA annotation. Results: As a result, the tissue-specific sexually dimorphic genes are affected by the addition of lncRNA annotation at a non-negligible level. In addition, many lncRNAs are expressed in a more tissue-specific fashion and with greater variation between tissues compared to protein-coding genes. Due to the genic region lncRNAs, the differentially expressed gene list changes, which results in certain sexually biased genes to become ambiguous across the tissues. Conclusion: In a past study, it has been reported that tissue-specific patterns can be seen throughout the differentially expressed genes between sexes in cattle. Using the same dataset, this study used a more recent reference, and the addition of conjugate lncRNA information, which revealed alterations of differentially expressed gene lists that result in an apparent distinction in the downstream analysis and interpretation. We firmly believe such misquantification of genic lncRNAs can be vital in both future and past studies.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.341-350
• /
• 2021

This study focused on the orientation of makeup education, considering the characteristics of the makeup sector. For this, the academic categories and properties of makeup in the theoretical areas of makeup education were analyzed. The practical fields of makeup techniques were divided into five different areas, and their characteristics and core competencies were analyzed. Then, the study results were verified through an in-depth interview. The results found the following: The academic categories of makeup are correlated with various fields such as art, technique, design, public health, science, medicine, and humanities. Analysis on the five different fields was mostly matched in practices. However, core competencies revealed a big difference in stage performances and fashion shows. Overall, basic beauty makeup, basic stage makeup, and basic media makeup techniques were found in terms of the core competencies. In particular, there was a high demand for hairstyling skills.

• The Research Journal of the Costume Culture
• /
• v.28 no.6
• /
• pp.771-786
• /
• 2020

This study aims to develop a life-friendly, wrap-one-piece style dance sports practice wear considering the physical characteristics of middle-aged, abdominally obese women. These types of practice wear allow people to enjoy exercise easily and to wear these garments as daily wear while meeting the requirements for dance sports wear. The three participants selected for this study were all women with five or more years of dance sports experience and were all average sized on Korea's abdominal obesity scale. In the first phase of the study, practice wear was created in a total of nine styles with three different styles of neckline depths for three different styles of dress skirt lengths. In the second phase of the study, the practice wear was created in 15 styles with five different styles of sleeve lengths for three different styles of waistline heights. After analyzing the design preferences of the participants, the fit preferences of the designs were evaluated and the final appearance was analyzed in order to suggest a pattern. The results of the subjects' first and second preference evaluations showed a preference for a 10 centimeter neckline depth, for high waistlines, and for elbow to wrist-length sleeves. The implementation of this research is expected to be extensive, as its results can be used as basic data for making lifestyle dance sports practice wear that covers the physical insecurities of middle-aged, abdominally obese women and enables them to enjoy their leisure time.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.58-66
• /
• 2021

Spiral-wound woven wire meshes packed bed rotating cylinder electrode was used for the simultaneous removal of cadmium (Cd) and copper (Cu) from a binary solution. The effects of weight percent of each metal on the removal and current efficiencies were studied at an operating current of 345A, while the effect of current on the removal efficiency of both metals was investigated at three levels of current (240, 345.and 400 mA). The experiments were carried out at constant rotation speed 800 rpm, pH = 3, and a total concentration of metals (500 ppm). The results showed that the removal efficiency of copper increased from 89% to 99.4% as its weight percent increased from 20% to100%. In a similar fashion, the removal efficiency of cadmium increased from 81% to 97% as its weight percent increased from 20% to100%. The results confirmed that the removal efficiency of any metals declined in the presence of the other. Increasing of current resulted in increasing the removal efficiency of both metals at different weight percents. The results confirmed that current efficiencies for removing of copper and cadmium simultaneously decline with increasing of electrolysis time and weight percent of cadmium or with decreasing the weight percent of copper. Current efficiency was higher at the initial stage of electrolysis for all weight percents of metals. The results showed that the decay of copper concentration was exponential at all weight percents of copper, confirming that the electrodeposition of copper is under mass transfer control in the presence of cadmium. While the decay of cadmium concentration was linear at lower weight percent of cadmium then changed to an exponential behavior at high weight percent of cadmium in the presence of copper.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.162-169
• /
• 2020

Design is a key factor that determines the competitiveness of products in the textile and fashion industry. It is very important to measure the similarity of the proposed design in order to prevent unauthorized copying and to confirm the originality. In this study, a deep learning technique was used to quantify features from images of textile designs, and similarity was measured using Spearman correlation coefficients. To verify that similar samples were actually detected, 300 images were randomly rotated and color changed. The results of Top-3 and Top-5 in the order of similarity value were measured to see if samples that rotated or changed color were detected. As a result, the VGG-16 model recorded significantly higher performance than did AlexNet. The performance of the VGG-16 model was the highest at 64% and 73.67% in the Top-3 and Top-5, where similarity results were high in the case of the rotated image. appear. In the case of color change, the highest in Top-3 and Top-5 at 86.33% and 90%, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.28-45
• /
• 2021

The importance of smart clothing as a product is increasingly emphasized as further growth in the potential of the smart market is expected. There is a high understanding and sympathy for the potential of smart clothing in the mass consumer market; therefore, commercialization is not actively carried out. This study enhances the understanding of the development direction of products with a focus on technical benefits, in order for smart clothing to gain access to customers as wearable devices. This study identifies major technologies used in smart clothing through an analysis of the patent technology status of smart clothing in Korea. Smart clothing is divided into three types: passive smart, active smart and advanced smart clothing based on a reaction mechanism and functional scope. We present the smart clothing and discuss the product features for three types. According to research, smart clothing products were equipped with passive, active, and advanced smart systems as well as provided new services by converging big data and AI technologies, rather than only using technologies such as sensors, controls, and actuators. Future directions for new smart clothing product development is also discussed in the conclusion.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.280-287
• /
• 2021

Generating electricity by using water in many energy harvesting system is due to their simplicity, sustainability and eco-friendliness. Evaporation-driven moist-electric generators (EMEGs) are an emergent technology and show great potential for harvesting clean energy. In this study, we report a transpiration driven electro kinetic power generator (TEPG) that utilize capillary flow of water in an asymmetrically wetted cotton fabric coated with carbon black. When water droplets encounter this textile EMEG, the water flows spontaneously under capillary action without requiring an external power supply. First carbon black sonicated and dispersed well in three different solvent system such as dimethylformamide (DMF), sodiumdedecylbenzenesulfonate (SDBS-anionic surfactant) and cetyltrimethylammoniumbromide (CTAB-cationic surfactant). A knitted cotton/PET fabric was coated with carbon black by conventional pad method. Cotton/PET fabrics were immersed and stuttered well in these three different systems and then transferred to an autoclave at 120 ℃ for 15 minutes. Cotton/PET fabric treated with carbon black dispersed in DMF solvent generated maximum current up to 5 µA on a small piece of sample (2 µL/min of water can induce constant electric output for more than 286 hours). This study is high value for designing of electric generator to harvest clean energy constantly.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.157-164
• /
• 2022

This study tried to analyze the heat resistance properties by blending epoxy and phenolic resin in a certain ratio, and to analyze the adhesive properties at the time of metal-polymer hetero-adhesion by applying Epoxy-phenolic resin between a silicon steel sheet and m-aramid sheet, the viscosity, adhesive peel strength, and adhesive cross section were measured using a rotational rheometer, a tensile tester(UTM), and a field emission scanning electron microscopy(FE-SEM). The thermal stability and heat resistance were confirmed by measuring the mass loss according to the temperature increase using Thermogravimetric analysis(TGA). After blending with epoxy and Phenolic resin(1:0.25 ratio) curing at 110℃ for 10 min, high adhesive strength was improved more than 40% compared to the adhesive strength using epoxy alone. When the space between the silicon steel sheet and m-aramid sheet, which is created during curing of the E-P blend, is cured with a slight weight, it is possible to control the empty space and improve adhesion.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.6
• /
• pp.1035-1051
• /
• 2021

This study compares the strength properties of Jumchi-Hanjis dyed with 70% and 100% persimmon juice concentrations and undyed Jumchi-Hanjis. The Juumchi-Hanjis were made from Dakjis (mulberry papers), which were mixed with different ratios of fibers from paper mulberries originating in Korea and Thailand, including wood pulp from Canada. Research results showed that tensile, wet tensile, and bursting strengths of Jumchi-Hanjis dyed with 70% concentration were higher than those of undyed Jumchi-Hanjis. However, the tearing strengths of the dyed Jumchi-Hanjis were lower than those of undyed Jumchi-Hanjis. The wet tensile strengths of Jumchi-Hanjis dyed with 100% concentration were higher than those of dyed with 70% concentration. The increase and decrease of tensile, tearing, and bursting strengths depending on persimmon juice dyeing differed as per the mixing ratio of the raw materials of Jumchi-Hanjis. Dyeing with 100% persimmon juice concentration tends to be more useful than 70% to increase the tensile (MD) and wet tensile strengths of Jumchi-Hanjis containing only Korean mulberry fibers (90%) and wood pulp (10%) as raw materials. Dyeing with 100% concentration tends to be less useful than 70% to increase the tensile, tearing and bursting strengths of Jumchi-Hanjis with high proportions (90% or 60%) of mulberry fibers from Thailand.