• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.504-510
• /
• 2002

Recently, thin film capacitors of high dielectric constant and low leakage current are applied to integrated devices. In this study, (Ba, Sr)$TiO_3$ (BST) thin films for low cost were prepared by Sol-Gel method. BST solution was spin-coated on Pt/$SiO_2$/Si substrate at 4,000 rpm for 10 seconds. Coating process was repeated 3 times and then sintered at $700^{\circ}C$ for 30 minutes. Structural and electrical characteristics of each specimen were analyzed by TG-DTA, SEM, fractal phenomenon, voltage-current and dielectric factor. Thickness of BST ceramics thin films are about 2,600~2,800 ${\AA}$ at depositing 3 times. Dielectric constant of thin films was decreased in 1 kHz~1 MHz. Dielectric constant and loss to frequency were 250 and 0.02 in $(Ba_{0.7}Sr_{0.3})TiO_3$ (BST3). Leakage current of BST3 was $10^{-9}\sim10^{-11}$/ A under 3 V.

• Journal of Nutrition and Health
• /
• v.41 no.7
• /
• pp.594-601
• /
• 2008

Panax ginseng C.A. Meyer (Panax ginseng) has been used for several thousand years to prolong longevity in Asian countries. Ginsenosides are the most active components isolated from ginseng and belong to damarane saponin which are separated into protopanaxadiol and protopanaxtriol. To evaluate the complex effect of ginsenoside in apo E null mice, ginseng extract were intraperioneally (i.p.) injected and provided high-cholesterol diet for 12 weeks. Ginseng extract came from were i.p. injected with dose of 100 mg/kg/day for 4 weeks in the last experimental duration. Ginseng extract used experiment was abundant Rb1, Rc, Re, and Rg1 and PD：PT ratio was 1.2. The high-cholesterol diet induced liver damage was significantly reduced by ginseng extract. Results from plasma lipid profiles and atherogenic index were improved by ginseng extracts. The GE group significantly decreased plasma TG and TC by 73% and 61% compared to apo E (-/-) group. Also ginseng extract tend to decrease lipid profiles and lipidperoxidation contents in liver and heart. Ginseng extract with an abundant amount of Rg1 significantly suppressed the apoptosis induction of cardiac tissue. In conclusion, ginseng extract (PD：PT = 1) was improved lipid profiles and anti-oxidant effects.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.6
• /
• pp.784-788
• /
• 2000

Hypolipidemic effect of exo-polymers(EPs) form submerged mycelial culture of Cordyceps militaris was investigated in male Sprague-Dawley rats. For a dose-dependent study, EPs were administered at the level of 50-100 mg/kg body weight (BW) and the data was compared with the saline administered control group. A significant reduction of both the plasma total cholesterol (TC) and triglyceride (TG) was registered under the influence of EPs. It reduced the lowe density lipoprotein (LDL) cholesterol level as much as 40.5%. Levels of high density lipoprotein (HDL) choloesterol did not vary significantly within the different experimental groups, but the HDL: TC ratio showed consistently a high value with the increasing dose. The effects of cultural conditions (pH and temperature) in mycelial growth and EPs production were studied. Both the biomass and EPs were produced in a wide range of pH and temperature.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.4
• /
• pp.297-300
• /
• 1994

Development of hyperlipidemic animal model is prerequisite for the screening of drugs lowering the blood lipoprotein level. In this study, two kinds of diet regimens were tried for the hyperlipidemic effect. The model will be used for the screening of current prescriptions to a variety of diseases related to hyperlipidemia by practioner of traditional herbal medicine. Fifteen male Wister rats of 200g were divided into three groups, and given normal, or either one of the two high cholesterol diets for up to 2 weeks. Regimen HC-1 and regimen HC-2 contained I% and 2% cholesterol in diet, respectively. Total cholesterol (TC), triglyceride (TG), high density lipoprotein cholesterol (HDL) and lower density lipoprotein cholesterol (LDL) levels in the serum were measured before the start of the diet, at 1 week after the start, and at 2 week point. Both regimens resulted in hyperlipidemia with the typical characteristics of increase in TC and LDL, and reduction in HDL, and showed no observable side effects such as diarrhea. In conclusion, both of HC-1 and HC-2 regimens appeared appropriate as diet regimens for the hyperlipidemic rat model.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.2
• /
• pp.110-114
• /
• 2006

The high-solid coatings were prepared by blending the synthesized acrylic resin in the previous paper, and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The $60^{\circ}$ specular gloss, impact resistance, cross-hatch adhesion, and heat resistance of the films proved to be good, and the pencil hardness, drying time, and pot-life proved to be slightly poor. From a viscoelastic measurement using a rigid-body pendulum, curing was accelerated with the Tg value.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1687-1691
• /
• 2014

This study reports on the synthesis of carbon nanofibers via chemical vapor deposition using Co and Cu as catalysts. In order to investigate the suitability of their catalytic activity for the growth of nanofibers, we prepared catalysts for the synthesis of carbon nanofibers with Cobalt nitrate and Copper nitrate, and found the optimum concentration of each respective catalyst. Then we made them react with Aluminum nitrate and Ammonium Molybdate to form precipitates. The precipitates were dried at a temperature of $110^{\circ}C$ in order to be prepared into catalyst powder. The catalyst was sparsely and thinly spread on a quartz tube boat to grow carbon nanofibers via thermal chemical vapor deposition. The characteristics of the synthesized carbon nanofibers were analyzed through SEM, EDS, XRD, Raman, XPS, and TG/DTA, and the specific surface area was measured via BET. Consequently, the characteristics of the synthesized carbon nanofibers were greatly influenced by the concentration ratio of metal catalysts. In particular, uniform carbon nanofibers of 27 nm in diameter grew when the concentration ratio of Co and Cu was 6:4 at $700^{\circ}C$ of calcination temperature; carbon nanofibers synthesized under such conditions showed the best crystallizability, compared to carbon nanofibers synthesized with metal catalysts under different concentration ratios, and revealed 1.26 high amorphicity as well as $292m^2g^{-1}$ high specific surface area.

• Particle and aerosol research
• /
• v.11 no.4
• /
• pp.107-113
• /
• 2015

SBA-16 (Santa Barbara Amorphous) was synthesized over supported $TiCl_4/MgCl_2$. Due to its high surface area and excellent morphological performance, it was expected to form the bi-supported catalytic system and be used for ethylene polymerization. Polymerization of ethylene was carried out at atmospheric pressure using hexane as solvent and triethylaluminium as cocatalyst. ICP, FTIR, DSC, TG-DTA were used to characterize polyethylene and catalyst product. Optimum conditions for ethylene polymerization were found to be 100 mL hexane, Al/Ti molar ratio of 160 and 1 h polymerization at $60^{\circ}C$. The activity of 396.76 kg PE/mol Ti.h.atm was achieved. Melting point of the obtained polymer was in the range of $132-135^{\circ}C$ and the highest degree of crystallization was 46%.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.6
• /
• pp.482-489
• /
• 2008

Ti-Cr alloys consist of BCC solid solution, C36, C14 and C15 Laves phase at high temperature. Among others, the BCC solid solution phase was reported to have a high hydrogen storage capacity. However, activation, wide range of hysteresis at hydrogenation/dehydrogenation, and degradation of hydrogen capacity due to hydriding/dehydriding cycles must be improved for its application. In this study, to improve such problems, we added a Nb. For attaining target materials, Ti-10Cr-xNb(x=1, 3, 5wt.%) specimens were prepared by arc melting. The arc melting process was carried out under argon atmosphere. As-received specimens were characterized using XRD(X-ray diffraction), SEM(Scanning Electron Microscopy) with EDX(Energy Dispersive X-ray) and TG/DSC(Thermo Gravimetric Analysis/Differential Scanning Calorimetry). In order to examine hydrogenation behavior, the PCI(pressure-Composition-Isotherm) was performed at 293, 323, 373 and 423K.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.521-527
• /
• 2001

The dynamic performance analyses and tests for a 50kW turbo-generator (KIMM-TG50) were carried out. The operating concept of this machine is that it gets the initial driving force from the built-in motor-generator until it reaches its self-sustaining speed of 40,000 rpm, and then the driving mode is changed to self-operating mode by the combustor installed between the centrifugal compressor and the turbine. Due to winding mistake of motor-generator, the system could go only up to 22000 rpm by the motor so that high pressure air externally fed into the turbine was utilized to get the system to run up to 62,000 rpm thereafter. The vibration data collected during the tests revealed that the first bending critical speed is in near 5,600 rpm as predicted in the design stage of the rotor-bearing system, and that there were no other identifiable critical speeds up until 62,000 rpm due to high damping from the squeeze film damper-bearings supporting the rotor. This paper presented some of the experimental results along with dynamic performance predictions made in the design stage as a part of progress being made.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2311-2315
• /
• 2011

Alumina supported polyphosphoric acid (PPA/$Al_2O_3$) was successfully prepared by impregnation of alumina support by polyphosphoric acid and characterized using FT-IR spectroscopy, the $N_2$ adsorption/desorption analysis (BET), thermal analysis (TG/DTG), and X-ray diffraction (XRD) techniques. The catalytic behavior of this new solid acid supported heterogeneous catalyst was checked in the synthesis of 14-aryl-14H-dibenzo[a, j]xanthenes by cyclocondensation reaction of ${\beta}$-naphthol and aryl aldehydes under solvent-free conditions. The results showed that the novel catalyst has high activity and the desired products were obtained in very short reaction times with high yields. Moreover, the catalyst can be easily recovered by filtration and reused at least three times with only slight reduction in its catalytic activity.