• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.140.1-140.1
• /
• 2015

Currently, As Plasma application is expanded to the industrial and medical industrial, Low temperature plasma characteristics became important. Especially in Medical industrial, Low temperature plasma directly adapted to human skin, so their plasma parameter is important. One of the plasma parameters is electron density, some kinds of method to measuring electron density are Thomson scattering spectroscopy and Millimeter-wave transmission measurement. But most methods is expensive to composed of experiment system. Heterodyne interferometer system is cheap and simple to setting up, So we tried to measuring electron density by Laser heterodyne interferometer. To measuring electron density at atmospheric pressure, we need to obtain the phase shift signal. And we use a heterodyne interferometer. Our guiding laser is Helium-Neon laser which generated 632 nm laser. We set up to chopper which can make a laser signal like a pulse. Chopper can make a 4 kHz chopping. We used Needle jet as Ne plasma sources. Interference pattern is changed by refractive index of electron density. As this refractive index change, phase shift was occurred. Electron density is changed from Townsend discharge's electron bombardment, so we observed phenomena and calculated phase shift. Finally, we measured electron density by refractive index and electron density relationship. The calculated electron density value is approximately 1015~1016 cm-3. And we studied electron density value with voltage.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1142-1146
• /
• 2004

The ultra precision linear stage is an essential device in the fields of MEMS and Bio technology. A piezo electric motor is widely used for its better linear characteristics, faster response time, and smaller size than conventional electro-magnetic actuator. We develop a new inchworm type motor to implement an actuator-integrated a long stroke linear stage which can move fast. To implement a servo system, we use a heterodyne interferometer as a position sensor, and we propose a new measurement technique using I/Q demodulator, and we propose a counting method to measure the position of fast moving object with low cost circuitry. The characteristics of the actuator and servo system are evaluated by measuring its displacement with a commercial laser interferometer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.195-198
• /
• 2002

Demand for high precision measurement of large area is increasing in many industrial fields. White-light Scanning Interferometer(WSI) is a well-known method for 3D profile measurement. However WSI has some limitations in a measurement range because of the sensing mechanism. Therefore, in this paper we use a heterodyne laser interferometer to get over the limitations of a short measurement range in WSI, We suggest a new WSI system combined with heterodyne laser interferometer. This system is aimed at eliminating Abbe error with measuring the focus point directly. With the use of triggering functionality of WSI, we can use this system as a probe of a precision stage such as a probe of CMM. The suggested system gives a repeatability of 87 nm in the absolute distance measurement test under the laboratory environment.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.271-272
• /
• 2007

In heterodyne laser interferometer, we use a phase difference between two beams to calculate target's length. However, there exist an nonlinearity error when measuring length in nanoscale. It is caused from frequency-mixed problem of two polarized beams, called cross talks. This fact limits the usefulness of an laser interferometer. To compensate the error, we propose a WLS(weighted least square) algorithm, which will reduce nonlinearity error and make a better optimization in heterodyne laser interferometer.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.283-284
• /
• 2007

In this paper we introduce a compensation of nonlinearity Heterodyne laser interferometer. The Laser Interferometer is used for length measurement in various industries. However, it has nonlinearity error caused by the imperfect optical equipment. This acts as an obstacle in the measurement improvement. We propose an adaptive error compensation using least mean square(LMS) to improve precision.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1751-1752
• /
• 2008

The heterodyne laser interferometer has a nano-meter scale resolution. However, the unwanted nonlinearity error caused from frequency-mixing limits the ultra-precise resolution. In this paper, we propose a recursive WLS algorithm to improve the resolution of heterodyne laser interferometer. Some experimental results show an effectiveness of the recursive WLS algorithm in nano-meter scale resolution.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.2
• /
• pp.34-39
• /
• 2005

The precision stage is an essential device for optic fiber assembly systems, micro machines and semiconductor equipments. A new piezoelectric inchworm type actuator is proposed to implement an actuator-integrated long-stroke linear stage. An in-and-quadrature phase (I/Q) heterodyne interferometer is developed as a feedback sensor of a servo system, and a synchronized counting method is proposed. The proposed measurement system can measure the accurate position of fast moving object with robustness to external sensing noise from actuator vibration. The developed servo stage will be applied to optic fiber device assembly system.

• Journal of the Optical Society of Korea
• /
• v.9 no.1
• /
• pp.22-25
• /
• 2005

The differential heterodyne interferometer (DHI) is suitable for precise measurement of step height and line width, since its differential configuration can significantly reduce disturbances from the environment [1,2]. Like most phase measuring interferometers, however, the DHI is limited, in that it can obtain only the phase from 0 to 2π, because of the sinusoidal nature of the optical interference involved. Thus, the measurable step height is limited to one quarter of the wavelength of the light source. This study describes a confocal differential heterodyne interferometer (CDHI) for measuring step heights of several micrometers, with a high resolution and line width with high repeatability. The CDHI has a simple structure and rapid measurement speed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.421-422
• /
• 2008

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.1042-1047
• /
• 2008

As an ultra-precision measurement system the heterodyne laser interferometer plays an important role in semiconductor industry. However the errors of environment and nonlinearity which are caused by air refraction and frequency-mixing separately reduce the accuracy of displacement measurement. In this paper we propose a DFNN(data fusion and neural network) method for error compensation. As a hybrid method of data fusion and neural network, DFNN method reduces the environmental and nonlinear error simultaneously. The effectiveness of the proposed error compensation method is proved through experimental results.