• 아시안잔디학회지
• /
• 제13권3호
• /
• pp.139-146
• /
• 1999

This studies was carried out to estimate the influence of mowing height, time lapse, rolling, and dew removal on green speed of putting green in Lake Side C. C. on 29, 30 Jun. 1998. The results were as follows. As mowing height increased, green speed tended to be decreased. After mowing, green speed tended to be decreased over the time, and appeared to be decrease significantly on the next day[Y=3.206-0.127.X1-1.41$\times$10-2.X4(Y=green speed, X1=mowing height, X4=time lapse)]. This suggests that the frequency of mowing must be increased to maintain the green speed. But, frequent mowing cause the turfgrass of putting green to be stressed. Rolling tended to increase green speed[Y=3.555-0.202.X1+0.111.X2(Y=green speed, X1=mowing height, X2=rolling)]. Thus, rollers is thought to be an tool used to increase green speed and rolling is expected to be able to decrease turfgrass stress while maintaining the performance level of the putting green. Dew removal appeared to increase green speed significantly[Y=2.499-0.125.X1+0.366.X3(Y=green speed, X1=mowing height, X3=dew removal)]. Thus, dew removal is expected to maintain the green speed in the morning.

• 대한안전경영과학회지
• /
• 제19권1호
• /
• pp.9-13
• /
• 2017

In this study, the height of the flame required to estimate the heat flow path and flame spread in pool fire has been applied by the empirical formula, but it is calculated without applying the pressure and temperature parameters of the fire room. Until now, the height of the flame applied to pool fire was $l_F=0.235Q^{2/5}-1.02D$ in the Heskestad empirical formula, but accurate temperature calculation was not possible due to the temperature and pressure which are not influenced by the flame height. Therefore, applying the temperature and pressure around it can calculate the exact flame height, which can be applied to fire investigation and fire dynamics. The structure of the flame is divided into a continuous flame, an intermittent flame, and a buoyancy flame, but it is assumed that the flame height is calculated from the visual aspect to the intermittent flame region, and the temperature of the buoyancy flame is very low. The effect of heat of vaporization on the height of flame was investigated. The results showed that flame height was different according to the pressure and temperature around the fire room.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.168-177
• /
• 2020

Many coastal engineering designs utilize empirical formulas containing the Equivalent Deep-water Wave Height (EDWH), which is normally given a priori. However, no studies have explicitly discussed a method for determining the EDWH and the resulting design wave heights (DEWH) under irregular wave conditions. Unfortunately, it has been the case in many design practices that the EDWH is incorrectly estimated by dividing the Shallow-water Wave Height (SWH) at the structural position with its corresponding shoaling coefficient of regular wave. The present study reexamines the relationship between the Shallow-water Wave Height (SWH) at the structural position and its corresponding EDWH. Then, a new procedure is proposed to facilitate the correct estimation of EDWH. In this procedure, the EDWH and DEWH are determined differently according to the wave propagation model used to estimate the SWH. For this, Goda's original method for nonlinear irregular wave deformation is extended to produce values for linear shoaling. Finally, exemplary calculations are performed to assess the possible errors caused by a misuse of the wave height calculation procedure. The relative errors with respect to the correct values could exceed 20%, potentially leading to a significant under-design of coastal or harbor structures in some cases.

• The Korean Journal of Ecology
• /
• 제25권1호
• /
• pp.29-31
• /
• 2002

The purpose of this study is to estimate height growth patterns and site index cuties (base index age 50 years) for Japanese red cedar trees(Cryptomeria japonica D. Don) grown in southern regions of Korea. The Chapman-Richards growth function was selected for stand height prediction using on the results of stem analysis data sets. Anamorphic base age invariant site index cuties were presented based on this height prediction equation. The resulting site index prediction equation can provide an indication of the productivity of the site quality based on Japanese red cedar trees plantation ages planted in southern regions of Korea.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.89-97
• /
• 1999

In this paper the forming simulations of ellipse bulge have been researched by using $PAM-STAMP_{TM}$ to estimate the sheet metal forming and the plastic deformation characteristic of ellipse bulge. Thin elliptical diaphragms of brass, copper, aluminum, and mild steel are bulged in elliptical dies having aspect ratios of 1.33 and 2. In order to compare the simulation results with the experiment and ellipse bulge's theory derived by using Johnson and Duncan's theory, the relations of hydraulic pressure and polar height, polar thickness strain and polar height, were compared. According to this study, the results of simulation and ellipse bulge's theory derived by using Johnson and Duncan's theory, and the bursting pressure and the bursting polar height are good agreement to the experiment. So, the results of simulation by using $PAM-STAMP_{TM}$ and the ellipse bulge's theory will give engineers good information to make assessment the formability and plastic deformation characteristic of hydraulic ellipse bulge test.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권4호
• /
• pp.164-168
• /
• 2002

The main hazard leading to breakdown in GIS(Gas Insulated Switchgear) comes from free conducting particles, which can cross between tee electrodes and cause dielectric failure under the influence of the electric field. Bouncing height of the particle can be an important factor to evaluate the possibility of breakdown occurrence. In this paper, how to estimate, outside a GIS, the bouncing height of the particle was newly suggested when GIS is in service. Both experimental results using 362 kV test chamber and computer simulation results on estimating the height were presented and compared with each other.

• 대한수학회지
• /
• 제45권6호
• /
• pp.1635-1646
• /
• 2008

Schanuel's formula describes the distribution of rational points on projective space. In this paper we will extend it to algebraic points of bounded degree in the case of ${\mathbb{P}}^1$. The estimate formula will also give an explicit error term which is quite small relative to the leading term. It will also lead to a quasi-asymptotic formula for the number of points of bounded degree on ${\mathbb{P}}^1$ according as the height bound goes to $\infty$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.260-263
• /
• 1996

THe Purpose of this paper is to match the feature point of man-made structure and to obtain the DEM which are occluded in a image plane. We use the trinocular matching with epipolar lines and planes. If an occlusion appears at one of the trinocular images, the DEM mapping is used to estimate the height of feature points in it.

• 대한한방소아과학회지
• /
• 제25권3호
• /
• pp.57-69
• /
• 2011

Objectives: Purpose of this study is to analyze and to estimate which and how much genetic and environmental factors have affected on growth. Also, a method of final height prediction can be developed from this study results. Methods: Correlation analysis and categorical regression analysis were conducted between genetic and environmental factors correlated with the final adult height, through survey from 171 male. Results: Mid parental height, neonatal body weight, intake frequency of beef, chicken, milk, fruits and coffee, sleep quantity and quality during the elementary school and sleep quantity during the middle school have affected on the final adult height. And a regression equation with 0.494 for coefficient of determination was obtained. Conclusions: Mid-parental-height has the most affected on the final adult height. Among environmental factors, food and sleep have significantly affected, but exercise doesn't. Among foods, meal, beef, and milk intake have remarkably affected on the final height, and chicken and fruit also have affected in some degree, but coffee has affected badly. Among sleep habits, sleep quantity during the elementary school has the most affected, sleep quality during the elementary school and sleep quantity during the middle school also have affected in some degree on final height. The younger the age is, the more sleep have affected and sleep quantity have more affected than sleep quality. Neonatal weight also has remarkably affected on the final height. Through this analysis, the final adult height can be predicted using regression equation which covers 49.4% of genetic and environmental factors.

• 대한원격탐사학회지
• /
• 제23권3호
• /
• pp.211-219
• /
• 2007

Building extraction is one of the essential issues for 3D city modelling. In recent years, high-resolution satellite imagery has become widely available and it brings new methodology for urban mapping. In this paper, we have developed a semi-automatic algorithm to determine building heights from monoscopic high-resolution satellite data. The algorithm is based on the analysis of the projected shadow and actual shadow of a building. Once two roof comer points are measured manually, the algorithm detects (rectangular) roof boundary automatically. Then it estimates a building height automatically by projecting building shadow onto the image for a given building height, counting overlapping pixels between the projected shadow and actual shadow, and finding the height that maximizes the number of overlapping pixels. Once the height and roof boundary are available, the footprint and a 3D wireframe model of a building can be determined. The proposed algorithm is tested with IKONOS images over Deajeon city and the result is compared with the building height determined by stereo analysis. The accuracy of building height extraction is examined using standard error of estimate.