• 제목/요약/키워드: heat of hydration heat

검색결과 712건 처리시간 0.034초

C급 플라이애쉬 콘크리트의 장기특성에 관한 연구 (The Study on Long-Terms Properties of Concrete Using C Class Fly Ash)

  • 이상수;원철;권영호;안재현;박칠림
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1996년도 봄 학술발표회 논문집
    • /
    • pp.141-145
    • /
    • 1996
  • The primary purpose of this study is to investigate reusal techniques of by-product produced the combined heat power plant in the construction field, which may contribute to the savings of construction materials and the conservation of enviornment. This study is compared and evaluated by testing the chemical resistance, adiabatic temperature rising test, creep and drying shrinkage. As the result of the study, the following conclusions are derived : (1) hydration heat of the fly ash concrete is less than the plain concrete in adiabatic temperature rising test, (2) the fly axh concrete (FA 30%) is similar to the plain concrete in the chemical resistamce, (3) the fly ash concrete (FA 10, 30%) is similar to the plain concrete in drying shrinkage, but the fly ash concrete (FA 50%) is highly increased, (4) the fly ash concrete (FA 30%) is less than the plain concrete in creep test.

  • PDF

Key Technologies for Super Tall Building Construction: Lotte World Tower

  • Kim, Gyu Dong;Lee, Joo Ho
    • 국제초고층학회논문집
    • /
    • 제5권3호
    • /
    • pp.205-211
    • /
    • 2016
  • This paper addresses the key technologies for supertall building construction based on the Lotte World Tower project in Korea. First, the mega-mat foundation construction technologies are shown, including ultra-low heat concrete, heat of hydration control programs, and the logistics plan. Then, high strength concrete technologies of 50~80 MPa are introduced and discussed within the context of the highest pumping record in Korea at 514.25 meters. Structural design concepts of gravity load and lateral force resistance systems are introduced, along with surveying systems using GNSS and temporary installation plans of special heavy equipment like tower cranes, hoists, and high pressure concrete pumps. If it is possible to coordinate these key technologies and others, optimizing for the building's design and construction, supertall building construction can be successfully completed.

A Thermal Conductivity Model for Hydrating Concrete Pavements

  • 정진훈;김낙석
    • 콘크리트학회논문집
    • /
    • 제16권1호
    • /
    • pp.125-129
    • /
    • 2004
  • Hydrating concrete pavement is typically subjected to temperature-induced stresses that drive cracking mechanisms at early concrete ages. Undesired cracking plays a key role in the long-term performance of concrete pavement systems. The loss of support beneath the concrete pavement due to curling caused by temperature changes in the pavement may induce several significant distresses such as punch out pumping, and erosion. The effect of temperature on these distress mechanisms is both significant and intricate. Because thermal conductivity dominates temperature flow in hydrating concrete over time, this material property is back-calculated by transforming governing equation of heat transfer and test data measured in laboratory. Theoretically, the back- calculated thermal conductivity simulates the heat movements in concrete very accurately. Therefore, the back- calculated thermal conductivity can be used to calibrate concrete temperature predicted by models.

Li$_2$O-MgO-MgF$_2$-SiO$_2$계 Glass-Ceramics 의 유전특성에 관한 연구 (The study on dielectric Properties of Li$_2$O-MgO-MgF$_2$-SiO$_2$system glass ceramics)

  • 이승준;강원호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1995년도 추계학술대회 논문집
    • /
    • pp.18-21
    • /
    • 1995
  • In this study, crystallization, water swelling and dielectric properties of Li$_2$O-MgO-MgF$_2$-SiO$_2$System glass ceramics were investigated. Base glass melted at 1450$^{\circ}C$ and crystallized through heat treatment. The optimum heat treatment schedule was 460$^{\circ}C$ for nucleation and 640$^{\circ}C$, 1100$^{\circ}C$ for crystallization. The Principle crystalline phase was lithium fluorhectorite. Lithium fluorhectorite was the crystal phase which it was influenced water swelling. Samples progressed 2 minutes later they have rapid hydration at forced water swelling condition. Also value of dielectric constants have approximately 10 at 100kHz.

  • PDF

설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011)

  • 한화택;이대영;김서영;최종민;백용규;김수민
    • 설비공학논문집
    • /
    • 제24권6호
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

저온환경에서 고분말도 시멘트의 수화반응 및 강도발현 특성에 관한 실험적 연구 (An Experimental Study on Hydration and Strength Development of High Blain Cement at Low Temperature)

  • 문영범;김형철;최현국;김재영;이한승;김목규
    • 한국건축시공학회지
    • /
    • 제15권4호
    • /
    • pp.367-373
    • /
    • 2015
  • 본 연구에서는 저온환경에 고분말도 시멘트를 적용하기 위하여 기초 특성을 검토하고자 하였다. 실험 결과 일반 시멘트에서 입도 분급된 고분말도 시멘트는 초기 수화에 큰 영향을 미치는 $10{\mu}m$이하의 입자가 다수 분포하였으며 분말도가 매우 높은 것으로 나타났다. 또한 분급된 미세한 시멘트 입자는 초기 수화반응이 매우 빠르고 이것은 시멘트의 수화 반응을 상승시킨다. 또한 고분말도 시멘트는 응결시간이 단축되고 모든 재령에서 압축강도가 높게 나타났다. 특히 저온환경에서는 초기 3일 압축강도 발현속도가 OPC 보다 2배 이상 발현하는 것을 확인할 수 있었으며 미소수화열 분석을 통해 수화반응 속도가 빠르고 수화열 또한 높은 것을 확인하였다. 또한 단열온도 상승 실험을 통해 초기 수화발열 상승온도 및 최고 상승온도가 높은 것으로 나타났다. 따라서 본 연구범위 내에서 저온환경 콘크리트에 우수한 시멘트 원료는 고분말시멘트로 판단된다.

탄소저감형 4성분계 고유동 콘크리트의 수화 특성에 관한 연구 (The Experimental Study on Hydration Properties of Quaternary Component Blended High Fluidity Concrete with CO2 Reduction)

  • 최연왕;오성록;조준희;강현진
    • 한국건설순환자원학회논문집
    • /
    • 제5권4호
    • /
    • pp.403-413
    • /
    • 2017
  • 본 논문에서는 탄소저감을 위한 산업부산물 사용 증대 및 시공성능 향상을 위하여 시멘트 사용량을 80% 이상 감소시킨 탄소저감형 4성분계 고유동 콘크리트(QC-HFC)를 제조하여 품질특성 및 수화특성 평가를 수행하였다. QC-HFC의 품질은 목표 성능을 만족하는 결과를 얻을 수 있었으며, 유동 및 역학특성의 경우 기존에 적용되는 콘크리트와 유사한 수준인 것으로 나타났다. QC-HFC의 건조수축은 기존 배합과 비교하여 약 2배 이상, 수화열의 경우 약 36% 감소하는 것으로 결과가 나타났으며, 그 결과 수화열 저감 효과에 따른 온도응력 감소, 상대적으로 작은 내외부 온도차로 인한 변형 감소로 균열 발생량을 저감시킬 수 있을 것으로 판단된다. 또한 매스 구조물의 시뮬레이션을 실시한 결과 온도균열지수 1.1 이상으로 균열발생 확률이 약 35% 감소하는 결과가 나타남에 따라 온도에 의한 균열을 저감시킬 수 있을 것으로 판단된다.

고로슬래그 미분말을 대량 사용한 고강도 콘크리트의 조기강도 및 길이변화 특성에 관한 실험적 연구 (An Experimental Study on Early Strength and Drying Shrinkage of High Strength Concrete Using High Volumes of Ground Granulated Blast-furnace Slag(GGBS))

  • 양완희;류동우;김우재;박동철;서치호
    • 한국건축시공학회지
    • /
    • 제13권4호
    • /
    • pp.391-399
    • /
    • 2013
  • 본 연구에서는 40 MPa 및 60 MPa급의 고강도 콘크리트를 제조함에 있어서, 보통 포틀랜드 시멘트에 대해 60~80%를 고로슬래그 미분말로 대체하고, 알카리 설페이트계(Modified Alkali Sulfate type) 자극제(Activator)를 활용하여 조기강도 개선효과 및 콘크리트의 길이변화 특성을 고찰하였다. 이에 따라 알카리 자극제를 결합재 대비 1%를 사용한 결과, 미소수화열은 72시간의 누적 발열량이 약 45%가 향상되어 초기의 강도 성능 향상에 기여하는 것으로 판단되며, 콘크리트의 유동성은 다소 감소하였으나, 3일과 7일 강도는 8~12% 향상되어 고로슬래그 미분말을 60% 수준으로 대체하여 고강도 콘크리트를 제조할 때 초기재령의 강도 확보에 알카리 설페이트계 자극제의 활용이 효과적인 것으로 나타났다. 또한 길이변화 시험 결과는, 40 MPa와 60 MPa 시험체 모두 BS40 > BS60 > BS60A > BS80A의 순으로 길이변화가 큰 것으로 나타났고, 알카리 자극제의 사용에 따라 길이변화가 다소 개선되는 것으로 나타났다.

내부구속에 의한 수화열 균열의 개선된 평가 방법 (An Advanced Assessment Strategy of Thermal Cracks Induced by Hydration Heat and Internal Restraint)

  • 전세진;최명성;김영진
    • 콘크리트학회논문집
    • /
    • 제18권5호
    • /
    • pp.677-685
    • /
    • 2006
  • 수화열 균열 저감 기법 중 내부구속이 지배적인 구조물에서 단면의 내외부 온도차를 관리하는 방식은 그 활용도가 매우 높다. 그러나 현 국내 기준의 내외부 온도차와 온도균열지수 관계식은 균열 발생 가능성을 과대평가하는 경향이 있다. 본 연구에서는 그러한 평가식이 유도된 배경을 단계별로 추적하여 타당성을 검증해 보았으며, 그 결과 재령에 따른 탄성계수의 변동성이 고려되지 않은 단순한 재료모델을 사용한 경우에 해당됨을 밝혔다. 개선된 재료모델로 증분형태 구성방정식인 hypoelastic 모델을 사용한 결과 온도균열지수가 기존 식보다 증가되었으며, 그 증가량은 다양한 조건들에 의존하는 것으로 나타났다. 본 연구의 분석 결과와 해외사례를 참조하여 평가식의 개선된 형태를 고찰하였으며 또한 평가시 필요한 내외부 온도차를 시공 조건들의 영향을 고려하여 용이하게 추정할 수 있는 식도 제안하였다. 추후 해석 및 실험 자료가 축적되면 구조물과 배합의 주요 특징들을 반영하여 평가식을 세분화하는 것도 바람직하다고 생각된다.