• 한국재료학회지
• /
• 제29권11호
• /
• pp.677-683
• /
• 2019

In this paper, nitrogen-doped reduced graphene oxide(rGO) is obtained by thermal annealing of nitrogen-containing compounds and graphene oxide (GO) manufactured by modified Hummers' method. We use melamine as a nitrogen-containing compound and treat GO thermally with melamine at over $800{\sim}1,000^{\circ}C$ and 1 ~ 3 hr under Ar atmosphere. The electrical conductivity of doped rGO is measured by 4-point probe method. As a result, nitrogen contents on rGO are found to be in the range of 2.5 to 12.5 at% depending on the doping conditions after thermal annealing. The main doping site on graphene oxide is changed from pyridinic-N and pyrrolinic N to the graphitic site as the heat treatment temperature increases. The electrical conductivity of doped rGO increases as the N doping content increases. As the thermal treatment time increases, the change of both total doping contents and doping sites is slight and the surface resistance is remarkably reduced, which is caused by healing effects of doped graphene oxide at high temperature.

• 생물환경조절학회지
• /
• 제22권2호
• /
• pp.146-153
• /
• 2013

토마토 접목순화장치 개발을 위한 기초실험의 일환으로 대목의 종류 및 활착실내의 온습도가 접목활착율에 미치는 영향을 조사하였다. 접목활착실의 온도는 $23^{\circ}C>17^{\circ}C>20^{\circ}C>26^{\circ}C$ 순으로 초기 활착율과 최종활착율이 높은 것으로 조사 되었으며, 상대습도는 높을수록 활착율은 양호한 결과를 나타냈다. 단 상대습도가 90% 이상 처리구에서는 곰팡이병에 의한 이병주 발생도 같이 증가하는 경향을 나타냈다. 대목의 종류에 따른 초기활착율은 'Kanbarune'의 $26({\pm}1)^{\circ}C$와 'Solution'의 $20({\pm}1)^{\circ}C$를 제외하고는 대목의 종류와 관계없이 모든 온도 처리구에서 83% 이상 양호한 활착율을 보였으나, 최종 활착율에서는 처리 온도간에 뚜렷한 유의적 차이를 나타내, $23({\pm}1)^{\circ}C$에서만 대목의 종류와 관계없이 85%에서 90%전후의 활착율을 보였고, $20({\pm}1)$와 $26({\pm}1)^{\circ}C$에서는 65~75% 정도로 활착율이 저하되었다. 특히, $27({\pm}1)^{\circ}C$에서는 이병주의 증가로 건묘생산율은 모든 대목처리구에서 65% 이하였다. 일반적으로 알려져 있는 고온기 접목활착 최적온도인 $23({\pm}1)^{\circ}C$에서는 대목의 종류에 따른 건묘생산율은 84~88% 전후로 대목 품종간 유의적 차이는 없었다. 접목활착실내 상대습도 조건에 따른 최종 접목활착율은 초기 2~3일간은 상대습도를 90%로 유지하고 나머지 7~8일간은 75% 정도로 유지하는 처리구에서 100% 접목활착 성공율을 나타냈고, 전기간 90%로 유지한 처리구와 1일 90%, 9일간은 75%로 유지한 처리구에서는 90%전후의 성공률을 나타냈다. 전반적으로 높은 상대습도 유지기간이 길수록 초기 활착율은 증가하는 경향을 보였으나, 고습도에서 장기간 묘를 양생할 경우, 곰팡이병 발생 등으로 최종 건묘생산율은 감소하므로, 초기 2~3일간만 90% 전후로 유지하고 나머지 구간은 75% 전후로 유지하는 것이 고온기 토마토 접목 활착율 향상을 위한 바람직한 조건이라 판단되었다. 각 처리간 묘소질에는 큰 차이를 나타내지 않았으나, 전반적으로 활착율이 양호했던 처리구에서 묘소질이 타 처리구에 비해 상대적으로 좋았으며, 이러한 경향은 특히 근권부의 형태적 특성을 조사한 결과에서 명료하게 나타났다. 이상의 결과 고온기 토마토 활착실내의 환경관리는 23도 전후의 온도에서 $80({\pm}5)%$의 상대습도로 관리하는 것이 건묘생산에 적합할 것으로 판단되었다.

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.129-133
• /
• 2020

우레아-포름알데히드(UF) 캡슐막의 마이크로캡슐 합성 공정에 있어서 반응 폐액에 포함된 포름알데히드의 잔류량을 GC-MS로 분석하였다. 포름알데히드의 반응에 영향을 주는 주된 인자로서 pH, 암모늄클로라이드 투입량, 온도의 3가지를 선정하고, 이 인자들이 반응 폐액 중의 포름알데히드 농도에 미치는 영향을 조사하였다. 실험 조건 중 암모늄클로라이드를 0.025g 투입한 경우에는 캡슐막 형성이 안 되거나 캡슐막이 약한 경향이 있어서 기본적으로 이 조건은 마이크로캡슐화에 부적절한 것으로 판단된다. 본 연구의 실험 조건에서 포름알데히드 잔류량이 최소화되는 마이크로캡슐화 조건은 70℃의 온도와 2.5의 pH에서 암모늄클로라이드를 0.050g 투입하는 조건임이 확인되었다. 본 연구의 결과는 보다 안전한 작업환경에서 마이크로캡슐화를 수행하는데 기여할 수 있을 것으로 기대된다.

• 한국실내디자인학회논문집
• /
• 제16권2호
• /
• pp.295-302
• /
• 2007

The use of colors plays an important role in the field of space design. The selection of proper colors influences on people who use space by making the most of the psychological and physical functions of colors. Especially, the medical space is relatively more important than other indoor spaces in the selection of colors. The medical space has to be something to do with diversity and functions, and at the same time with stability and quietude, as well as the space with general convenient facilities. Color is not only related to the expression but also to the distinction of things and the existence. It also functions as a visual language. Human beings depend heavily on the function of color as a visual language. According to previous studies, human beings depend on color by 80% of the whole range of eyesight. Thus, color is an important factor in recognizing things and space. For example, in hospital, it Is very important to apply proper colors to various medical treatment spaces for the sake of patients' rest and healing. Various colors which do not consider the function of patients' rest and healing may make the space confusing against the change of space and structure. It is also important to apply colors to the change of space and structure. Another key point that I would like to make is that color has visual, direct and physical influence on the human body. For example, the color red with long wavelength serves to regulate body temperature. Research on the color scheme for hospitals should consider both physical and psychological factors. That is why the research should be carried out in depth through continuous clinical demonstration. The present research aims to outline color planning.

• 소성∙가공
• /
• 제22권8호
• /
• pp.463-469
• /
• 2013

In the previous work, a new forging process design, which included incremental upsetting, diffusion bonding and cogging, was suggested as a method to manufacture 1.9wt%C ultrahigh carbon workrolls. The previous study showed that incremental upsetting and diffusion bonding are effective in closing voids and healing of the closed void. In addition, compression tests of the 1.9wt%C ultrahigh carbon steel revealed that new microvoids form within the blocky cementite at temperatures of less than $900^{\circ}C$ and that local melting can occur at temperatures over $1120^{\circ}C$. Thus, the forging temperature should be controlled between 900 and $1120^{\circ}C$. Based on these results, incremental upsetting and diffusion bonding were used to check whether they are effective in closing and healing voids in a 1.9wt%C ultrahigh carbon steel. The incremental upsetting and diffusion bonding were performed using sub-sized specimens of 1.9wt%C ultrahigh carbon steel. The specimen was deformed only in the radial direction during the incremental upsetting until the reduction ratio reached about 45~50%. After deformation the specimens were kept at $1100^{\circ}C$ for the 1 hour in order to obtain a high bonding strength for the closed void. Finally, microstructural observations and tensile tests were conducted to investigate void closure behavior and bonding strength.

• 혜화의학회지
• /
• 제10권1호
• /
• pp.157-166
• /
• 2001

Oryoungsan which first recorded in Sanghanron, the clinical medical book consists of treating acute febrile disease according to its change, is one of the frequently used oriental medicines. these days, it has been prescribed in symptoms accompanied by edema mostly. therefore it is easy to consider it as a type of diuretics. In Sanghanron it was originally used in the symptoms of perspiration, decreased urine volume, thirsty, flatulence. these symptoms indicate loss of body fluid and the prescription which orders "taking warm water sufficiently" supports this. On this background, it is supposed that Oryoungsan treats dehydration after providing water and electrolytes. To consider that herbal medicines consisted of Oryoungsan make electrolytes go out of the body, The healing mechanism of dehydration doesn't meet this. Because Oryoungsan was used in condition of fever or in similar condition, it is more resonable to understand that restoration of increasing blood flow to the subcutaneous venous plexus regulating body temperature in febrile condition into body circulation, resulting into maintaining main blood volume and into treating decreased urine volume and thirsty is Oryoungsan's function in the dehydration or febrile condition. That is, symptoms are decreased or disappeared through restoring unbalance of internal body fluid. The other target is pain controls, especially chronic headache, facial pain and trigeminal neuralgia. it is suggested that the function of pain control of Oryoungsan is related to 5-HT(5-hydroxytrypamine), nerve transmitter in the endogenous analgesic system. Moreover it is also suggested that Oryoungsan is relate to 5-HT, considering the fact that gastroparesis, a symptom of cyclic vomiting syndrome treated with 5-HT1D receptor agonist is similar to the 'bi', symptoms appeared in the Oryoungsan-related disease.

• Journal of Acupuncture Research
• /
• 제25권2호
• /
• pp.129-138
• /
• 2008

Objectives : The moxibustion is the method in using the heat stimulation made of attached and burned a moxa or other herbal materials on a healing point or acupuncture point and the chemical stimulation of a resin made from burning them. We need to standardize the characteristics of moxa combustion in order to get more systematic and objective result in operation mechanism and effects and then get more clinical abilities in these fields. Methods : In this study, using of labview system on the moxibustion. 1. we studied relation the size of barley and jujube seed with the moxa cone's peak combustion temperature and then measured and compared the moxa cone's peak combustion temperature by tonification and sedation method. 2. we measured the peak combustion temperature of indirect moxibustion. Results & comclusions : 1. When we measured a direct moxibustion's combustion temperature, the jujube seed sized moxa cone's peak temperature was higher than the barley sized moxa cone's when it burned and the time to peak temperature of the barley sized moxa cone was shorter than the jujube seed sized moxa cone's. 2. When the direct moxibustion was burned by the tonification and sedation method, the sedation method's peak temperature was higher than the tonification method's, the tonification's time to peak temperature was shorter than the sedation method's. 3. When we measured the temperature of the moxa combustion in the kinds of sliced herbal materials, the peak temperature of indirect moxibustion with a ginger when it sliced a 1.3mm size and a 1.5mm size was degreed within $40^{\circ}C$ to $52^{\circ}C$ and the peak temperature of indirect moxibustion with a garlic when it sliced a 1.7mm size was degreed within $46^{\circ}C$ to $62^{\circ}C$.

• 한국염색가공학회지
• /
• 제19권1호
• /
• pp.17-23
• /
• 2007

Dyeing properties using natural material named Sasa quelpaertensis Nakai were investigated under various conditions such as fabric type, pH, concentration, temperature, dyeing time and dipping count. Sasa quelpaertensis Nakai is a unique material in that it is raised only at Halla mountain in Jeju island and is known to have healing effect. Overall, wool fabrics were better than cotton fabrics in all aspects of the dyeing properties showing reddish yellow. For the fastness properties, robbins washing and perspiration fastness were excellent but lightfastness was poor as expected.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.1-10
• /
• 2011

Recently medical facilities that can help to heal the interpretation have evolved as a healing space. Accordingly, the patient's emotional, psychological and social ward plan to meet the needs of the patient to recover is important. The medical team is also related to the nature of human life, so they are experiencing high stress levels compared to other professionals. However, most places don't consider the user's psychological behavior. The purpose of this study is to build user-friendly lighting environment using LED lighting. LED lighting is easy to adjust illuminance and color temperature, and it is can be implemented in the medical area.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 봄 학술발표회 논문집
• /
• pp.73-78
• /
• 1992

A stochastic simulated anneal ins (SSA) is a recent approach to the solution of problems characterized by large number of interacting degrees of freedom. SSA simulates the degrees of freedom in a problem in a such a way that they are a collection of atoms slowly being coolded into a ground state which would correspond to the stationary point of the problem. In this paper, for a randomly disturbed current design, SSA optimization technique is used, which establishes a probabilistic criterion for acceptance or rejection of current design and iteratively improves it to arrive at a stationary Point at which critical temperature is reached. Simple truss optimization problem which consider as their constraints only the tensile and compressive yielding strength of the members are tested using SSA. Satisfactory results are obtained and some discussions are given for the behavior of SSA on the tested truss structures.