• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.130-137
• /
• 2006

TFT-LCD(Thin Film Transistor Liquid Crystal Display) module is representative commercial product of FPD(Flat Panel Display). Thickness of TFT-LCD module is very thin. It is adopted for major display unit for IT devices such as Cellular Phone, Camcorder, Digital camera and etc. Due to the harsh user environment of mobile IT devices, it requires complicated structure and tight assembly. And user requirements for the mechanical functionalities of TFT-LCD module become more strict. However, TFT-LCD module is normally weak to high level transient mechanical shock. Since it uses thin crystallized panel. Therefore, anti-shock performance is classified as one of the most important design specifications. Traditionally, the product reliability against mechanical shock is confirmed by empirical method in the design-prototype-drop/impact test-redesign paradigm. The method is time-consuming and expensive process. It lacks scientific insight and quantitative evaluation. In this article, a systematic design evaluation of TFT-LCD module for mobile IT devices is presented with combinations of FEA and testing to support the optimal shock proof display design procedure.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.26-34
• /
• 2013

Boiler equipment in power plant is always being operated in harsh conditions and severely exposed to the extreme environment of high temperature. Therefore periodically the state of devices should be checked, diagnosed, and analyzed to ensure the reliability of the equipment. Traditionally, such a diagnosis is based one or two physical properties of the sample taken from the equipment like hardness, microstructure, etc.. However, to enhance the confidence of the diagnosis, it is necessary to synthesize those properties together. This paper is to propose such a synthetic procedure for T23 which was developed to be used in $569^{\circ}C/596^{\circ}C$ condition. Creep test and accelerated degradation test were performed simultaneously, and the physical properties such as microstructure, tensile strength, yield strength, hardness, and indentation properties were measured. This paper proposes a method of determining the remaining life by quantitative comparison. It will provide the basis of evaluating life assessment more objective and reliable.

• 한국표면공학회지
• /
• 제49권5호
• /
• pp.408-415
• /
• 2016

The offshore structures exposed to harsh corrosive such as the marine environment is essential for the quality management technique throughout the life cycle of initial design, construction and operation. Also, it should satisfy the design life and ensure the safety of the substructure with optimization of design process. This study focused on optimization of design condition for corrosion protection of wind turbine structure and computational analyzing was performed to evaluate the performance of corrosion protection with utilizing practical experimental data. We expect this analytical study contribute to improve the corrosion maintenance stability and economical efficiency of designing wind turbine structures. As a result, the design of cathodic protection system using sacrificial anodes required accurate identification of current density in order to meet the long term design life, which can be seen that a change of structure surface's coating breakdown factor is one of the key influencing factors.

• 한국해안해양공학회지
• /
• 제9권1호
• /
• pp.35-42
• /
• 1997

오늘날의 정보통신시대에 있어서는 대용량의 정보를 전달할 수 있는 해저광케이블의 역할이 더욱 중하나 열악한 해양환경에 놓여 있어 설치시나 운용시에 파손의 가능성이 높으며 파손시 막대한 손실을 초래한다. 본 연구에서는 해저케이블 해석에 적용되는 여러 수치기법중 유한차분법에 근거하여 포설시뮬레이션 프로그램을 개발하였으며 케이블 포설시의 2차원 동적거동해석을 수행하였다. 여러 경우에 대한 예제해석을 수행한 결과 프로그램에 의한 계산 결과가 만족스러운 것으로 확인되었으며 케이블에 대한 직선형상이론을 적용한 결과와도 잘 일치하였다.

• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.732-736
• /
• 2006

This paper describes the physical characterizations of polycrystalline 3C-SiC thin films heteroepitaxially grown on Si wafers with thermal oxide, In this work, the 3C-SiC film was deposited by LPCVD (low pressure chemical vapor deposition) method using single precursor 1, 3-disilabutane $(DSB:\;H_3Si-CH_2-SiH_2-CH_3)\;at\;850^{\circ}C$. The crystallinity of the 3C-SiC thin film was analyzed by XPS (X-ray photoelectron spectroscopy), XRD (X-ray diffraction) and FT-IR (fourier transform-infrared spectometers), respectively. The surface morphology was also observed by AFM (atomic force microscopy) and voids or dislocations between SiC and $SiO_2$ were measured by SEM (scanning electron microscope). Finally, residual strain was investigated by Raman scattering and a peak of the energy level was less than other type SiC films, From these results, the grown poly 3C-SiC thin film is very good crystalline quality, surface like mirror, and low defect and strain. Therefore, the polycrystalline 3C-SiC is suitable for harsh environment MEMS (Micro-Electro-Mechanical-Systems) applications.

• 로봇학회논문지
• /
• 제15권3호
• /
• pp.221-232
• /
• 2020

In a four-wheel independent drive platform, four wheels and motors are connected directly, and the rotation of the motors generates the power of the platform. It uses a skid steering system that steers based on the difference in rotational power between wheel motors. The platform can control the speed of each wheel individually and has excellent mobility on dirt roads. However, the difficulty of the straight-running is caused due to torque distribution variation in each wheel's motor, and the direction of rotation of the wheel, and moving direction of the platform, and the difference of the platform's target direction. This paper describes an algorithm to detect the slip generated on each wheel when a four-wheel independent drive platform is traveling in a harsh environment. When the slip is detected, a compensation control algorithm is activated to compensate the torque of the motor mounted on the platform to improve the trajectory tracking performance of the platform. The four-wheel independent drive platform developed for this study verified the algorithm. The wheel slip detection and the compensation control algorithm of the platform are expected to improve the stability of trajectory tracking.

• 복식
• /
• 제60권1호
• /
• pp.56-75
• /
• 2010

Jeju island is located in far from main land and has very harsh environment that has formed an unique clothing style as well. In addition, the popular belief has been developed with originality even their clothing. Therefore, this study is concerned with costumes worn for various ritual events and to analyze their features in Jeju. The shamanism served 18,000 gods are composed to 12 different types of the events for wealth, safety, heath, sadness or thanks. The costumes worn by officiating priests or 'Simbang(shaman)' depend on the occasion of an event, and they are different for male and female performers. The styles of costumes for religious service can be divided into 7 types: Regulation dress(Jebok), Korean full-dress attire(Dopo), Official uniform(Danryung), Military uniform(Gunbok), Formal dress (Durumagi), Casual wears and Special costumes. The costumes for religion events are not various and splendid as compare with another province in Jeju. Because, when simbang expired, their clothings had been burned according to custom. However, It is important materials for us to know the clothing of time. We should keep studing that costume more as a valuable culture.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.1-7
• /
• 2014

Gas turbines for generation are operated under high temperatures, high pressures and in corrosive environments for long periods of time. This environment causes serious damage to these parts. Therefore, the material, coating, and cooling technology used with a gas turbine are important factors with regard to turbine blade development. One method that can be used to protect a product from harsh conditions is the coating technology. A turbine blade undergoes very aggressive thermal stress and experiences high-temperature fatigue. In order to reduce the surface temperature of the components and protect the blade from high-temperature flames, a thermal barrier coating (TBC) is applied to its substrate. This study confirms the applicability of an inspection system for the turbine blade coating layer using an artificial heat source.

• 마이크로전자및패키징학회지
• /
• 제24권2호
• /
• pp.1-9
• /
• 2017

Recently, there has been a continuous researches on solders having sophisticated and improved performance due to demand for high-density and miniaturization of electronics, and development of solder for automotive electronics which can be used in harsh environment. When developing a new solder alloy, there is a wettability of solder on substrate for things to consider, and the wetting balance test is one of the methods for measuring that one. In this paper, the wetting balance test is introduced, and the calculus of the surface tension of solder and the contact angle between solder and substrate using wetting curve obtained is introduced too. In detail, the principle and test method of the wetting balance test, the introduction of the parameters with important meaning in the wetting curve, the method of calculating the contact angle as well as the surface tension of the solder using the shape of the solder meniscus.

• 대한조선학회논문집
• /
• 제46권2호
• /
• pp.171-178
• /
• 2009

In this paper, RFID (Radio Frequency Identification) based management system is introduced to control effectively logistic supply items and machinery spare parts in a ship. To apply an RFID system under very harsh environment in a ship which is a steel-structured small area with lots of compartment, we measured reading distances and angles in open space, in an steel compartment, and an real ship separately in order to investigate the reliability between various tags and RFID.