• 한국발생생물학회지:발생과생식
• /
• 제13권2호
• /
• pp.89-95
• /
• 2009

p63은 다양한 상피 조직의 줄기세포와 전구세포에 존재한다는 사실이 잘 알려져 있으나, 치아 형성, 특히 사기질과 뿌리 형성시기에서의 p63 위치느 ㄴ아직 연구해야 할 과제로 남아 있다. 본 연구에서는 p63이 치아 발생 동안 치아상피에 편재하여 나타나는 것을 면역조직화학 기법을 이용하여 확인하였다. p63은 피부, 모낭, 구강점막 그리고 턱밑샘 도관을 포함하는 상피의 바닥층과 바닥위층에 위치하였다. 그러나 치아 부위에서는 치아관의 모든 세포, 사기질기관, 헤르트비히 뿌리상피집 그리고 말라세쯔 상피잔사에 p63이 관찰되었다. 이 결과는 치아 발생 중 p63이 줄기세포 유지 외에도 다른 기능을 한다는 사실을 보여준다.

• 산업공학
• /
• 제10권2호
• /
• pp.1-13
• /
• 1997

The problem of the formation of machine-part cells in FMS is a very important issue at the planning and operating stages of FMS. This problem is inherently a combinatorial optimization problem, proven to be NP-complete(or, NP-hard). Among the several kinds of approaches which have been applied to solve the combinatorial optimization problems, the Simulated Annealing(SA) algorithm, a technique of random search type with a flexibility in generating alternatives, is a powerful problem solving tool. In this paper, the SA algorithm is used to solve machine cell-part family formation problems. The primary purpose of the study is to find the near-optimal solution of machine cell-part family formation problem, whare the product volume and number of operations are prespecified, that can minimize the total material handling cost caused by exceptional elements and intercell moves as much as possible. The results show that the SA algorithm is able to find a near-optimal solution for practical problems of the machine cell-part family formation.

• 수도
• /
• 제24권4호통권85호
• /
• pp.79-87
• /
• 1997

In an effort to prevent the formation of DBPs from disinfection and the microbial regrowth in distribution systems, the ozonation followed by biological filtration process in drinking water treatment train has been recently developed as an alternative process to reduce effectively water-born organic matter as precursor. There are, however, insufficient for the consistent information and data about the relation between ozone dosage based on organic surrogate parameter, TOC or DOC and effect of ozonation on BDOC formation. This study is to review critically for the effect of ozonation on biodegradability on the basis of published technical papers including the output from author's research laboratory. It truned out that : 1. ozonation in the presence of organic matter has a tendancy to increase in BDOC content, 2. the rate of BDOC formation was maximum below 1mg $O_3/mg$ DOC of ozone dose, but about maximum content of BDOC was obtainable at the range from 1.5mg $O_3/mg$ DOC to 2mg $O_3/mg$ DOC, 3. from above 1mg $O_3/mg$ DOC, the rate of BDOC formation became slow down, 4. from above 2mg $O_3/mg$ DOC, BDOC formation was quantitatively negligible, In conclusion, it needs further systematic study and research concerned to biodegradability and treatability by ozonation in terms of organic characteristics and experimental conditions because it was hard to find out the consistent experimental data comparable each other that were performed by numbers of research authors.

• Restorative Dentistry and Endodontics
• /
• 제41권1호
• /
• pp.29-36
• /
• 2016

Objectives: The purpose of this study was to assess the ability of two new calcium silicate-based pulp-capping materials (Biodentine and BioAggregate) to induce healing in a rat pulp injury model and to compare them with mineral trioxide aggregate (MTA). Materials and Methods: Eighteen rats were anesthetized, cavities were prepared and the pulp was capped with either of ProRoot MTA, Biodentine, or BioAggregate. The specimens were scanned using a high-resolution micro-computed tomography (micro-CT) system and were prepared and evaluated histologically and immunohistochemically using dentin sialoprotein (DSP). Results: On micro-CT analysis, the ProRoot MTA and Biodentine groups showed significantly thicker hard tissue formation (p < 0.05). On H&E staining, ProRoot MTA showed complete dentin bridge formation with normal pulpal histology. In the Biodentine and BioAggregate groups, a thick, homogeneous hard tissue barrier was observed. The ProRoot MTA specimens showed strong immunopositive reaction for DSP. Conclusions: Our results suggest that calcium silicate-based pulp-capping materials induce favorable effects on reparative processes during vital pulp therapy and that both Biodentine and BioAggregate could be considered as alternatives to ProRoot MTA.

• 구강회복응용과학지
• /
• 제23권4호
• /
• pp.303-312
• /
• 2007

Recently several studies have been developed not only to apply bone materials to bony defect, but also to use osteogenic and osteoinductive materials to form bone more effectively. In 1998 Mark et al applied gel formation of PRP(platelet-rich plasma) in bony transplantation for mandibular reconstruction as one of the method of stimulating bone formation in maxillofacial area, which is contain of varies growth factors. After he reported that PRP accelerate bone formation, which is used in varies bone transplantation and augmentation with a good result. Especially there are amount of growth factors in PRP, and PRP increase angiogenesis, cell division, and mesenchymal cell growth. Moreover it is capable of osteoconduction, hemostatitis, anti-infection, forming the shape at transplantation, ease of handling, and recipient site stability. So it is known that success rate is high in bone transplantation. However PRP need tissue adhesive to make plasma to solid form. Thrombin and calcium chloride, component of PRP, is extracted from autogenic donor. So it is expensive to extract and there is possibility of hepatitis, AIDS, and hematogenous metastasis. After all, tissue adhesive have the limitation and danger of use. So we are willing to introduce that we had get some idea after using PRF(platelet-rich fibrin) in the various hard and soft tissue bony defect, which is self extracted simply and contain growth factors.

• Geomechanics and Engineering
• /
• 제20권5호
• /
• pp.447-459
• /
• 2020

Based on the literature statistical method, the paper publication status of the isolated working face and the distribution of the rockburst coal mine were obtained. The numerical simulation method is used to study the stress distribution law of working face under different mining range. In addition, based on the similar material simulation test, the overlying strata failure modes and the deformation characteristics of coal pillars during the mining process of the isolated working face with thick-hard key strata are analyzed. The research shows that, under the influence of the key strata, the overlying strata formation above the isolated working face is a long arm T-type spatial structure. With the mining of the isolated working face, a series of damages occur in the coal pillars, causing the key strata to break and inducing the rockburst occurs. Combined with the mechanism of rockburst induced by the dynamic and static combined load, the source of dynamic and static load on the isolated working face is analyzed, and the rockburst monitoring methods and the prevention and control measures are proposed. Through the above research, the occurrence probability of rockburst can be effectively reduced, which is of great significance for the safe mining of deep coal mines.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2621-2624
• /
• 2014

The rapid and spontaneous adsorption of proteins on nanoparticle (NP) surfaces in biological fluids such as blood is an important phenomenon as it possibly determines "what the cells see" and, thus, the fates of NPs in living organisms. In order to quantitatively understand protein coronas at the molecular level, we investigated human serum albumin (HSA) coronas that were produced on silica NPs of 20 nm and 50 nm diameters using conventional gel electrophoresis. Analysis of the concentration dependence of protein adsorption showed that HSA coronas preferentially formed a monolayer on silica NPs and revealed the presence of hard protein coronas. HSA adsorption was clearly dependent on NP size, and this might be due to the different surface curvatures of NPs of different sizes.

• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.69-75
• /
• 2004

In this study, various model composite latexes were synthesized using n-butyl acrylate and methyl methacrylate as comonomers by seeded multi-staged emulsion polymerization. Monodispersed model composite latex particles with size of 190 nm and polydispersity index of 1.05, which have various morphology including random copolymer particle, soft-core/hard-shell particle, hard-core/soft shell particle, and gradient-type copolymer particle, homopolymers particles were prepared. The designed morphology of model composite particles were confirmed.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.135-148
• /
• 1997

It was attempted to improve wear resistance and durability under the load surface pressure that make a formation of the thick (mm-order) hard-surfacing layer for aluminum alloy of 5083. The thick hard layers were formed on the surface of 5083 by TIG overlay method. Al-(25.4, 33.6, 45.7 mass%) Cu filler metals which were newly developed were overlaid on two base metals forming the one bead, one layer and two layers. The investigation was made on the characteristics of hardening and wear resistance in relation to the microstructure of overlaid layers with selection of optimum overlaying condition.

• 대한치과의사협회지
• /
• 제48권2호
• /
• pp.113-118
• /
• 2010

Titanium and titanium alloys are the most common materials used for dental and biomedical implants, owing to their biocompatibility and favourable mechanical properties. However infection of the region surrounding a dental implant by pathogenic microorganisms is a significant factor in implant failure. Prevention and control of microbial colonization of implant surfaces is considerable interest to the biomedical community. One important strategy is to render the implant surface antibacterial by impeding the formation of biofilm. A number of approaches have been proposed for this purpose. Therefore, we reviewed the researches of antibacterial coatings on titanium implants in this articles.