• 제목/요약/키워드: handpiece

검색결과 99건 처리시간 0.037초

수종 air-turbine 다이아몬드 버의 절삭 효과에 관한 실험적 연구 (An experimental study of cutting efficiency of air-driven diamond burs on human tooth)

  • 홍진선;여인성;김성훈;이재봉;한중석;양재호
    • 대한치과보철학회지
    • /
    • 제49권1호
    • /
    • pp.1-7
    • /
    • 2011
  • 연구 목적: 치과용 에어터빈에 장착하여 사용하는 다이아몬드 버는 치과 치료에서 치아 형성을 위한 필수적인 절삭용 회전 기구이다. 반복해서 사용되는 다이아몬드 버는 마모를 일으키게 되고 마모된 다이아몬드 버는 치아 형성시 열 발생, 절삭 효과 저하 등의 문제를 발생하게 된다. 본 연구의 목적은 자연치를 사용하여 coarse grit 다이아몬드 버의 절삭 효과를 비교하고자 하였다. 연구 재료 및 방법:임상에 널리 사용되는 coarse grit 다이아몬드 버 4종류를 선정하였다: Komet(A사), Shofu(B사), Premier(C사), Mani(D사). 발거된 상악 중절치의 순면을 사용하였다. 100g의 힘으로 6 mm 폭으로 10회 반복하여 실제 임상에서와 유사한 치아 형성을 하였다. 치아 형성을 하지 않은 coarse grit 다이아몬드 버를 대조군으로 하였고, 1개(test1), 2개(test2), 3개(test3), 그리고 4개(test4)의 치아 형성을 한 coarse grit 다이아몬드 버의 마모 양상을 공초점 레이저 주사 현미경으로 표면 거칠기 값을 다이아몬드 버의 첨부, 중간, 그리고 하단부 등의 3곳에서 측정하였고, 주사전자 현미경 (SEM)으로 표면 형태를 평가하였고, 표면 거칠기는 one-way ANOVA로 분석하였다. 결과: 공초점 레이저 주사 현미경으로 표면 거칠기를 측정하였다. A사의 coarse grit 다이아몬드 버의 경우 대조군의 표면 거칠기 값 (Sa)은 $52.98\;{\mu}m$인데 비해, test 1은 $48.32\;{\mu}m$, test 2는 $46.79\;{\mu}m$, test 3은 $45.06\;{\mu}m$, 그리고 test 4는 $43.43\;{\mu}m$을 보였다. B사 coarse grit 다이아몬드 버의 경우 각각 $50.68\;{\mu}m$, $45.62\;{\mu}m$, $44.41\;{\mu}m$, $44.10\;{\mu}m$, 그리고 $42.46\;{\mu}m$을, C사 coarse grit 다이아몬드 버의 경우 $58.02\;{\mu}m$, $55.53\;{\mu}m$, $52.22\;{\mu}m$, $48.26\;{\mu}m$, 그리고 $45.36\;{\mu}m$을, D사coarse grit 다이아몬드 버의 경우 $50.11\;{\mu}m$, $46.73\;{\mu}m$, $45.46\;{\mu}m$, $42.58\;{\mu}m$, 그리고 $41.80\;{\mu}m$을 보였다. 치아 형성한 횟수에 따라 각 coarse grit 다이아몬드 버에서 표면 거칠기의 변화는 통계적으로 유의하였으나, 각 시스템별 유의성은 관찰되지 않았다. SEM으로 관찰시 대조군에 비해 test 4에서 coarse grit 다이아몬드 버 입자의 마모를 관찰할 수 있었다. 결론: 치아 형성에 따른 coarse grit 다이아몬드 버의 표면 거칠기 값 (Sa)을 비교한 결과 각 치아 형성마다 통계적으로 유의한 차이를 보여 버를 수회 사용시 표면 거칠기가 상당히 감소할 것으로 보인다. Coarse grit 다이아몬드 버의 사용에 따른 각 제조회사별 차이를 비교한 결과는 통계적으로 유의한 차이를 보이지 않아 제조사에 따른 다이아몬드 버의 차이는 발견되지 않았다. Coarse grit 다이아몬드 버의 표면 특성을SEM으로 관찰한 결과, 대조군에 비해 test 4에서 다이아몬드 버 입자의 마모를 관찰할 수 있었다.

레진 시멘트를 이용한 레진 파이버 강화 레진포스트의 치근 상아질에 대한 미세인장결합강도 (MICROTENSILE BONDING OF RESIN FIBER REINFORCED POST TO RADICULAR DENTIN USING RESIN CEMENT)

  • 김진우;유미경;이세준;이광원
    • Restorative Dentistry and Endodontics
    • /
    • 제28권1호
    • /
    • pp.80-88
    • /
    • 2003
  • Object The purpose of this study were to evaluate the microtensile bond strength of resin fiber reinforced post to radicular dentin using resin cement according to various dentin surface treatment and to observe the inter face between post and root dentin under SEM Material and Method A total 16 extracted human single rooted teeth were used. A lingual access was made using a #245 carbide bur in a high-speed handpiece with copious air water spray. The post space was mechanically enlarged using H-file(up to #60) and Gates Glidden bures(#3). This was followed by refining of the canal space using the calbrating drill set provided in ER Dentinpost(GEBR, BRASSELER GmbH&Co. KG). The 16 teeth were randomly distributed into 4 group of 4 teeth. Group 1 teeth had their post space prepared using 10% phosphoric acid as root canal surface treatment agent during 20s. The canal was then rinsed with saline and dried with paper point. Group 2 teeth had their post space prepared using 3% NaOCl as root canal surface treatment agent during 30min. The canal was then rinsed with saline and dried with paper point. Group 3 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. The canal was then rinsed with saline and dried with paper point. Group 4 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. After rinsing with saline, the canal was rinced 10m1 of 3% NaOCl for 30min. After drying with paper point, the post(ER Dentinpost, GEBR, BRASSELER GmbH&Co. KG) was placed in the treated canals using resin cement. Once the canal was filled with resin cement(Super bond C&B sunmedical co. Ltd.), a lentulo was inserted to the depth of the canal to ensure proper coating of the root canal wall. After 24 hours, acrylic resin blocks($10{\cdot}10{\cdot}50mm$) were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strengths for each stick was measured with Microtensile Tester. Failure pattern of the specimen at the interface between post and dentin were observed under SEM. Results 1. Tensile bond strengths(meen{\pm}SD$) ) were expressed with ascending order as follows group 4, $12.52{\pm}6.60$ ; group 1, $7.63{\pm}5.83$ ; group 2, $4.13{\pm}2.31$ ; group 3, $3.31{\pm}1.44$. 2. Tensile bond strengths of Group 4 treated with 17% EDTA +3%NaOCl were significant higher than those of group 1, 2 and 3 (p<0.05). 3. Tensile bond strengths of Group 1 treated with 10% phosphoric acid were significant higher than those of group 2 (p<0.05). Tensile bond strengths of Group 4 treated with 17% EDTA +3% NaOCl was significant higher than those of other groups.

지혈제 오염이 콤포머의 전단결합강도에 미치는 영향 (THE EFFECTS OF SURFACE CONTAMINATION BY HEMOSTATIC AGENTS ON THE SHEAR BOND STRENGTH OF COMPOMER)

  • 허정무;곽주석;이황;이수종;임미경
    • Restorative Dentistry and Endodontics
    • /
    • 제27권2호
    • /
    • pp.150-157
    • /
    • 2002
  • One of the latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer Ideally the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows : Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent$^{\circledR}$(Ultradent product Inc., Utah, U.S.A.) Group 3: Dentin surface was not etched but was contaminated by Bosmin$^{\circledR}$(Jeil Pharm, Korea.). Group 4: Dentin surface was not etched but was contaminated by Epri-dent$^{\circledR}$(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin sorface was etched and contaminated by Astringedent$^{\circledR}$. Group 7 : Dentin surface was etched and contaminated by Bosmin$^{\circledR}$. Group 8: Dentin surface was etched and contaminated by Epri-dent$^{\circledR}$. Group 9: Dentin surface was contaminated by Astringedent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 11 : Dentin surface was contaminated by Epri-dent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning, F2000$^{\circledR}$ was applicated on the conditoned dentin surface The teeth were thermocycled in distilled water at 5$^{\circ}C$ and 55$^{\circ}C$ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed or 1.0 mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

Mineral trioxide aggregate, calcium sulfate와 calcium hydroxide의 치수에 대한 반응 (Pulp Response of Mineral Trioxide Aggregate, Calcium Sulfate or Calcium Hydroxide)

  • 윤영란;양인석;황윤찬;황인남;최홍란;윤숙자;김선헌;오원만
    • Restorative Dentistry and Endodontics
    • /
    • 제32권2호
    • /
    • pp.95-101
    • /
    • 2007
  • 개의 치수에 MTA, calcium hydroxide 및 calcium sulfate로 치수복조 후 치수 반응을 서로 비교하여 MTA와 calcium sulfate가 임상적으로 치수복조제로서 사용 가능할 것인가를 구명하고자 본 연구를 시행하였다. 8개월 된 2마리 개의 24개의 치아가 본 연구에 사용되었다 전신 마취하에 고속 핸드피스를 사용하여 멸균된 #2 round bur로 치경부에 와동을 형성한 후 치수를 노출시켰다. MTA, calcium hydroxide 및 calcium sulfate를 치수노출부에 도포하였다. 와동 부위는 IRM으로 가봉하고 광중합레진으로 수복하였다. 처리 2개월 후, 전신 마취하에 희생시킨 후 조직학적으로 관찰하였다. MTA처리군에서는 치수 노출부위에 경조직의 상아질교가 형성되었으며 새로 형성된 상아질교 하방에 조상아세포가 새로 형성되었다. 치수충혈과 함께 국소적 인 혈관 증식 이 나타났으며 치수에 염증반응은 나타나지 않았다. Calcium hydroxide로 처리한 군은 상아질교 하방에 조상아세포가 관찰되지 않았으며 만성 염증반응이 다양하게 나타났다. Calcium sulfate로 처리한 군은 경조직의 상아질교가 관찰되었으며, 상아질교 하방에 조상아세포 층이 새로 관찰되었다. 몇몇의 중성구 침윤과 함께 미약한 정도의 만성염증반응이 관찰되었다. 이상의 결과에서 MTA가 calcium hydroxide및 calcium sulfate에 비해 치수에 생체친화적임을 시사하며 기계적 치수노출시 치수복조제로 사용할 수 있음을 시사한다.

Er:YAG 레이저로 삭제된 상아질에 대한 컴포지트 레진의 미세인장결합강도에 관한 연구 (Micro-tensile Bond Strength of Composite Resin Bonded to Er:YAG Laser-prepared Dentin)

  • 민숙진;안용우;고명연;박준상
    • Journal of Oral Medicine and Pain
    • /
    • 제31권3호
    • /
    • pp.211-221
    • /
    • 2006
  • 목적 전통적 고속 회전식 절삭기구 또는 Er:YAG 레이저로 삭제된 상아질에, 두가지 다른 접착 시스템을 적용한 후, 축조한 컴포지트 레진의 미세인장결합강도를 비교하고, 다양한 Er:YAG 레이저 에너지가 미세인장결합강도에 미치는 영향을 평가한다. 재료 및 방법 40개의 제3대구치를 사용하여, 평평한 상아질면을 만든 후 8개의 군으로 나누어, 4가지 절삭방법 (고속 회전식 절삭기구, 2 W, 3 W, 4 W 출력의 Er:YAG 레이저) 중 한 가지로 삭제하고, 2가지 접착 시스템 (Scotchbond Multipurpose Plus, Clearfil SE bond) 중 한 가지로 처리하여 컴포지트 레진을 축조하였다. 24시간의 저장 후, 각 시편을 결합면에 수직으로 자르고, 미세인장결합강도를 측정하였다. 각 군의 미세인장결합강도는 평균$\pm$표준 편차로 표현하였고, 통계분석을 위해 two-way ANOVA, one-way ANOVA, student-Newman-Keuls' multiple comparison test, 그리고 t-test가 사용되었다. 결과 및 결론 1. 접착시스템과 관계없이, 절삭방법에 따른 미세인장결합강도의 유의한 차이가 있었고, 높은 순서대로 나열하면 다음과 같다: 3 W, 2 W, Bur, 4 W (p<0.001). 2. 절삭방법과 관계없이, Scotchbond Multipurpose Plus로 처리한 군이 Clearfil SE bond로 처리한 군보다 유의하게 높은 미세인장결합강도를 나타냈다 (p<0.001). 3. Scotchbond Multipurpose Plus로 처리한 군 중에서, 3 W 레이저 절삭군이 가장 높은 미세인장결합강도를 나타냈고, 다음이 Bur, 2 W, 4 W 절삭군 순이었다 (p<0.001). 4. Clearfil SE bond로 처리한 군 중에서 3 W 레이저 절삭군이 가장 높은 미세인장결합강도를 나타냈고, 다음이 2 W, 4 W, Bur 절삭군 순이었다 (p<0.001). 5. 두 가지 접착 시스템 모두에서, 레이저로 절삭한 군의 미세인장결합강도의 차이가 있었고, 높은 순서대로 나열하면 3 W, 2 W, 4 W 순이었다 (p<0.001). :상아질에 접착된 컴포지트 레진의 미세인장결합강도는 절삭방법과 접착시스템의 상호작용에 의해 유의한 영향을 받았다. 임상에서 레진 수복시, 2 W-3 W 범위내로 Er:YAG laser를 사용한다면 전통적 핸드피스 못지않게 수복물의 우수한 결합강도를 얻을 수 있다. 특히 시술시간의 단축, 과도한 산부식에 따른 부작용의 예방을 위해 Clearfil SE bond를 포함한 self etching system을 사용하고자 한다면 bur보다 Er:YAG laser를 이용한 삭제방법이 더 유용한 결합력을 제공할 것이다.

치과용 디지털 색상 분석용 기기의 정확성과 재현 능력에 대한 평가 (EVALUATING THE RELIABILITY AND REPEATABILITY OF THE DIGITAL COLOR ANALYSIS SYSTEM FOR DENTISTRY)

  • 정중재;박수정;조현구;황윤찬;오원만;황인남
    • Restorative Dentistry and Endodontics
    • /
    • 제33권4호
    • /
    • pp.352-368
    • /
    • 2008
  • 본 연구에서는 치과용 디지털 색상 분석기기 중 하나인 Shadescan (CYNOVAD, Montreal, Canada)의 색상 분석의 정확성과 재현 능력을 평가하였다. 균일한 치아 배열을 가진 20대 성인 남자 8명과 여자 8명의 상악 인상을 고무인상제 (Exaflex, GC, Japan)를 이용하여 채득하고, 인상에 A2 색상의 임시 크라운 제작용 자가중합형 레진을 주입하여 치아 모델을 완성하고, ShadeScan을 이용해 각 치아의 영상을 얻어 컴퓨터의 ShadeScan 프로그램으로 분석하였다. 그리고 측정 결과의 재현 능력를 평가하기 위해 2개의 치아 모델을 임의로 선택하여 각 치아마다 10회의 색상 측정을 시행하여 분석 결과를 비교하였다. 또한 분석된 영상의 동일 shade 간의 색차를 확인하기 위해 광중합 복합레진인 Gradia Direct (GC, Tokyo, Japan)의 shade guide의 CIE $L^*a^*b$ 값을 백색과 흑색 배경판 상에서 spectrophotometer (Spectrolino, GretagMacbeth, USA)로 측정하고, ShadeScan에 의해 동일한 shade로 분석된 shade guide간의 색차를 계산하여 다음의 결과를 얻었다. 모든 치아에서 모델 제작 재료와 동일한 A2 색상으로 분석된 경우는 없었으며, 개개의 치아에서 전체 순면이 동일한 색상으로 분석된 예는 없었다. 또한 동일한 치아군에서 치아의 크기, 형태, 순면의 굴곡 등에 따라 서로 다른 색상 분포를 보였다. 재현성 평가에서 각 치아의 중앙부는 비교적 일정한 재현성을 보였으나, 절단부와 주변 부위는 재현성이 낮았으며, 동일한 shade로 분석된 shade guide 간에는 3 이상의 색차 (${\Delta}E^*$)를 보였다. 이상의 결과는 치과용 디지털 색상 분석기기는 비록 높은 재현 능력은 가지고 있지만 정확성에 오류가 있음을 시사하며, 따라서 이러한 기기를 이용한 색상 분석 시 좀 더 세밀한 주의와 다른 방법의 추가 사용이 필요하리라 사료된다.

수정체유화장치의 초음파 출력속도 및 자동막힘감지 기능 향상의 술 후 임상결과 비교 (Clinical Effects of an Improved Pump Reaction Rate and Automatic Occlusion Sensing System in Phacoemulsification)

  • 김유나;이진아;김재용;김명준;차흥원
    • 대한안과학회지
    • /
    • 제59권11호
    • /
    • pp.1017-1023
    • /
    • 2018
  • 목적: 최근 펌프조절장치와 발판의 반응속도가 빨라지고 자동막힘감지(automatic occlusion sensing) 기능이 향상되어 수술 중 흡입력과 절단력을 향상시킨 수정체유화장치가 소개된 바 있다. 본 연구에서는 수정체유화술 시행 중 여러 매개변수를 비교하여 기기의 반응속도 향상과 자동막힘감지 기능이 수정체유화술의 임상결과에 미치는 영향을 비교하고자 하였다. 대상과 방법: 단일 술자에게 수정체유화술을 시행받은 68명의 백내장 환자, 총 80안이 본 연구에 포함되었다. 기존의 기기(WhiteStar $Signature^{(R)}$ system)를 사용하여 초음파유화술을 시행한 40안을 대조군으로 하였으며, 반응속도 향상 및 자동막힘감지 기능 효과를 분석하기 위해서 향상된 기기(WhiteStar $Signature^{(R)}$ PRO system)를 사용하여 초음파유화술을 시행한 40안을 실험군으로 정하였다. 두 군 모두에서 수술 중 parameter of effective phaco time with a specific coefficient for the transversal movement expressed in seconds (EFX), 총 초음파 사용시간(ultrasound time), 유효 초음파 사용시간(effective phaco time, EPT), 평균 초음파 출력(average phaco power, AVG) 및 평형염액 사용량을 확인하였고 수술 전후 중심각막두께(central corneal thickness)를 확인하여 수술 전후의 상관관계를 독립표본검정을 통하여 분석하였다. 결과: 두 군의 비교에서 수정체혼탁도와 상관없이 Signature $PRO^{(R)}$ system에서 수술 중 적은 EFX (p<0.001), 짧은 유효 초음파 사용시간(EPT, p<0.001), 작은 평균 초음파 출력(AVG, p<0.001)을 사용함을 확인하였다. 수술 후 중심각막두께는 양 군에서 차이가 없었다. 결론: 수정체유화술을 시행함에 있어 기기의 반응속도 향상 및 자동막힘감지 기능은 수술 중 수정체 핵의 흡입력과 절단력을 높이면서도 전방을 안정적으로 유지할 수 있도록 하여 유의하게 짧은 시간 동안 적은 초음파 출력을 사용하면서 효율적인 수술이 가능하게 함을 확인하였다.

두 가지 임플란트 드릴 조합에 따른 온도 변화 및 효율 비교 (Temperature change and performance of bur efficiency for two different drill combinations)

  • 황보흥;박재영;이상윤;손큰바다;이규복
    • 대한치과보철학회지
    • /
    • 제60권2호
    • /
    • pp.143-151
    • /
    • 2022
  • 목적: 본 연구의 목적은 두 가지 다른 임플란트 드릴 조합을 사용하여 열 발생과 드릴링 시간에 따른 성능 효율성을 평가하는 것이다. 재료 및 방법: 본 연구에서는 소갈비뼈를 연구재료로 사용하였다. 표본을 시험하기 위해 소의 뼈에서 근막 및 근육을 제거하고 드릴링 영역 주위에 온도 센서를 장착했고, 드릴링 후 온도 및 시간을 측정하였다. 실험군은 이니셜 드릴 전에 사용하는 드릴에 따라 가이드 드릴 사용 그룹과 린드만 드릴 사용 그룹으로 나누었다. 가이드 드릴 사용 그룹의 드릴 사용 순서는 다음과 같다; guide drill (ø 2.25), initial drill (ø 2.25), twist drill (ø 2.80), 그리고 twist drill (ø 3.20). 린드만 드릴 사용 그룹의 드릴 사용 순서는 다음과 같다; Lindmann drill (ø 2.10), initial drill (ø 2.25), twist drill (ø 2.80), 그리고 twist drill (ø 3.20). 통계적 분석은 Mann-Whitney U test 및 Friedman test를 이용하여 집단간 차이를 분석하였다 (α = .05). 결과: 가이드 드릴 사용 그룹의 각 시편에 대한 평균 성능 효율은 0.3861 - 1.1385 mm3/s 범위를 보였고, 린드만 드릴 사용 그룹의 평균 성능 효율은 0.1700 - 0.4199 mm3/s를 보였다. 가이드 드릴을 사용한 드릴 조합은 드릴링 시간으로 계산했을 때 우수한 성능 효율을 보였다 (P < .001). 결론: 가이드 드릴 사용 그룹이 린드만 드릴 사용 그룹보다 우수한 성능 효율을 보였기 때문에, 1차 드릴링을 수행하는 과정에서 가이드 드릴의 사용이 더욱 적합하였다.

임플랜트 식립부위 형성시 골조직의 온도변화에 관한 연구 (A STUDY ON THE TEMPERATURE CHANGES OF BONE TISSUES DURING IMPLANT SITE PREPARATION)

  • 김평일;김영수;장경수;김창회
    • 대한치과보철학회지
    • /
    • 제40권1호
    • /
    • pp.1-17
    • /
    • 2002
  • The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.