• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.2
• /
• pp.57-61
• /
• 2006

This paper calculates and gives the analysis of mean energy in pure $SiH_4,\;Ar-SiH_4$ mixture gases ($SiH_4-0.5[%],\;5[%]$) over the range of $E/N =0.01{\sim}300[Td]$, p = 0.1, 1, 5.0 [Torr] by Monte Carlo the Backward prolongation method of the Boltzmann equation using computer simulation without using expensive equipment. The results have been obtained by using the electron collision cross sections by TOF, PT, SST sampling, compared with the experimental data determined by the other author. It also proved the reliability of the electron collision cross sections and shows the practical values of computer simulation. The calculations of electron swarm parameters require the knowledge of several collision cross-sections of electron beam. Thus, published momentum transfer, ionization, vibration, attachment, electronic excitation, and dissociation cross-sections of electrons for $SiH_4$ and Ar, were used. The differences of the transport coefficients of electrons in $SiH_4$, mixtures of $SiH_4$ and Ar, have been explained by the deduced energy distribution functions for electrons and the complete collision cross-sections for electrons. A two-term approximation of the Boltzmann equation analysis and Monte Carlo simulation have been used to study electron transport coefficients.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.1
• /
• pp.19-28
• /
• 2006

The phase-shift method for determining the Langmuir, Frumkin, and Temkin adsorption isotherms ($\theta_H\;vs.\;E$) of H for the cathodic $H_2$ evolution reaction (HER) at a Pt/0.1 M KOH solution interface has been proposed and verified using cyclic voltammetric, differential pulse voltammetric, and electrochemical impedance techniques. At the Pt/0.1 M KOH solution interface, the Langmuir and Temkin adsorption isotherms ($\theta_H\;vs.\;E$), the equilibrium constants ($K_H=2.9X10^{-4}mol^{-1}$ for the Langmuir and $K_H=2.9X10^{-3}\exp(-4.6\theta_H)mol^{-1}$ for the Temkin adsorption isotherm), the interaction parameters (g=0 far the Langmuir and g=4.6 for the Temkin adsorption isotherm), the rate of change of the standard free energy of $\theta_H\;with\;\theta_H$ (r=11.4 kJ $mol^{-1}$ for g=4.6), and the standard free energies (${\Delta}G_{ads}^{\circ}=20.2kJ\;mol^{-1}$ for $k_H=2.9\times10^{-4}mol^{-1}$, i.e., the Langmuir adsorption isotherm, and $16.7<{\Delta}G_\theta^{\circ}<23.6kJ\;mol^{-1}$ for $K_H=2.9\times10^{-3}\exp(-4.6\theta_H)mol^{-1}$ and $0.2<\theta_H<0.8$, i.e., the Temkin adsorption isotherm) of H for the cathodic HER are determined using the phase-shift method. At intermediate values of $\theta_H$, i.e., $0.2<\theta_H<0.8$, the Temkin adsorption isotherm ($\theta_H\;vs.\;E$) corresponding to the Langmuir adsorption isotherm ($\theta_H\;vs.\;E$), and vice versa, is readily determined using the constant conversion factors. The phase-shift method and constant conversion factors are useful and effective for determining the Langmuir, Frumkin, and Temkin adsorption isotherms of intermediates for sequential reactions and related electrode kinetic and thermodynamic data at electrode catalyst interfaces.

• Korean journal of food and cookery science
• /
• v.16 no.6
• /
• pp.511-520
• /
• 2000

To investigate the effect of sugar and drying method on quality and storage characteristics of beef jerky, storage, textural and sensory characteristics were examined. Water activity was decreased as storage time was prolonged and the honey and rice syrup-added natural dried samples(N-H, N-R) were recorded the lowest value, 0.71 at five weeks of storage. During the storage period, pH values of all the samples were decreased and honey-added and heated air dried beef jerky(H-H) had the lowest pH value, 5.22. L, a, b values had a tendency to decrease, during the storage period. During the storage period, TBA values of all samples showed increasing tendency. Sugarsyrup-added samples(N-S, H-S, S-S$\^$*/) had the lowest TBA value, and those of honey-added samples(N-H, H-H, S-H$\^$**/) were highest, regardless of drying method. Total plate counts of bacteria and the number of lactic acid bacteria were increased as storage time was prolonged. Sugar syrup-added and heated air dried beef jerky(H-S) had the lowest in total plate counts of bacteria and the number of lactic acid bacteria, at five weeks of storage. Textural properties value of all samples were increased as storage time was longer. Honey-added samples showed the higest springness and cohesiveness value and sugarsyrup-added and natural dried sample showed the highest value in chewiness, gummness and hardness. In the almost sensory score of natural dried beef jerky was decreased asstorage time was prolonged, regardless of packaging method. The sensory score of heated air dried samples were higher than those of natural dried samples, regardless of packaging method. $\^$*/S-S sucrose syrup added smoking dried sample, $\^$**/S-H honey added smoking dried sample

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1297-1300
• /
• 2005

In this study the gradient method is used to design a mixed $H_2/H_{\infty}$ controller. It is verified by an example that is BTT missile. We expect through the results of this study that gradient method can be easily applied to diverse optimization problems.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.539-544
• /
• 2006

An $H_2$ filter is derived for time delay systems, where there are time delay terms in the state and in the output. A method to compute the $H_2$ norm of time delay systems is proposed. Based on the $H_2$ norm computation method, an $H_2$ filter design is formulated as a nonlinear optimization problem.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.259-262
• /
• 2008

This paper introduces a simplified method to consider forming effects in a car crash analysis. Representative value was used to consider forming effects simply. Four representative values, which are the mean value of thicknesses and effective plastic strains at nodes, the median of thicknesses and effective plastic strains at nodes, were evaluated. A crash analysis of a front side member shows that analysis results from the suggested methods are similar to those from the conventional method to consider forming effects. Use of the mean effective plastic strain shows the best results. A car crash analysis for a ULSAB/AVC model under the condition of US SINCAP were carried out to demonstrate the validity of the suggested method. Analysis results show that the error of suggested method is less than 1.5%.

• Journal of Magnetics
• /
• v.20 no.3
• /
• pp.258-264
• /
• 2015

In this paper, an adequate B-H curve extrapolation method is proposed and its reliability is verified through experiments. A method is developed to estimate the magnetic saturation induction from the density of the lamination core and electrical resistivity. The magnetic saturation induction of electrical steels measured using a vibration sample magnetometer are compared with the analytical results to validate the accuracy of the proposed estimation method. It is found that the predicted error in the magnetic saturation induction of the electrical steels are approximately 1.2% when the proposed method is used. The performance of interior permanent magnet synchronous motors that applies the proposed method are evaluated via 2D nonlinear finite element analysis and through experiments. Based on the obtained results, the extrapolated B-H curves from the estimated saturation induction can be used for various analyses in saturation region.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.18-26
• /
• 2007

This paper presents an improved redundant picture coding method that efficiently enhances the error resiliency of H.264. The proposed method applies polyphase downsampling to residual blocks obtained from inter prediction and selectively encodes the rearranged residual blocks in the redundant picture coding process. Moreover, a spatial-temporal sample construction method is developed for the redundant coded picture, which further improves the reconstructed picture quality in error prone environments. Simulations based on JM11.0 were run to verify the proposed method on different test sequences in various error prone environments with average packet loss rates of 3%, 5%, 10%, and 20%. Results of the simulations show that the presented method significantly improves the robustness of H.264 to packet loss by 1.6 dB PSNR on average over the conventional redundant picture coding method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.560-564
• /
• 1996

A mixed H$^{2}$/$H^{\infty}$ controller design method for linear systems with time delay in all variables and parameter uncertainties in all system matrices is proposed. Robust $H^{\infty}$ performance and H$^{2}$ performance condition that accounts for model-matching of closed loop system and disturbance rejection is also derived. With expressing uncertain system with linear fractional transformation form, we transform the robust stability and performance problem to the H$^{2}$/$H^{\infty}$ optimization problem and design a mixed H$^{2}$/$H^{\infty}$ controller. Using the proposed method, mixed H$^{2}$/$H^{\infty}$ controller for underwater vehicle with time delay and parameter variations are designed. Simulations of a design example with hydrodynamic parameter variations and disturbance are presented to demonstrate the achievement of good robust performance.t performance.ance.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2897-2904
• /
• 2023

The Standardized Plant Analysis Risk-Human Reliability Analysis (SPAR-H) method is a widely used method in human reliability analysis (HRA). Performance shaping factors (PSFs) refer to the factors that may influence human performance and are used to adjust nominal human error probabilities (HEPs) in SPAR-H. However, the PSFs are assumed to be independent, which is unrealistic and can lead to unreasonable estimation of HEPs. In this paper, a new method is proposed to handle the dependencies among PSFs in SPAR-H to obtain more reasonable results. Firstly, the dependencies among PSFs are analyzed by using decision-making trial and evaluation laboratory (DEMATEL) method. Then, PSFs are assigned different weights according to their dependent relationships. Finally, multipliers of PSFs are modified based on the relative weights of PSFs. A case study is illustrated that the proposed method is effective in handling the dependent PSFs in SPAR-H, where the duplicate calculations of the dependent part can be reduced. The proposed method can deal with a more general situation that PSFs are dependent, and can provide more reasonable results.