• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.504-509
• /
• 1993

A heavy load driving system for the gun laying control is designed with the analysis of performance in pointing accuracy and speed. To eliminate the firing noise and high frequency system noise, a .PI. filter is implemented in conjunction with the PI velocity control. To incorporate the gunner's commands in the PID position control loop easily, a .mu.-processor is utilized in the position control loop. Main difficulties in the heavy load driving system exist in the design of motor drivers and heat sinkers. With an appropriate design of the motor drivers and heat sinkers, the performance of the gun laying system is analyzed by the simulation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.211-214
• /
• 2002

The detection of tool wear is very important in an automated manufacturing system. This paper presents a tool condition monitoring system based on the wavelet transform analysis of the AC servo motor current in a milling process. The current measurement is relatively simple and does not affect machining operations. The discrete wavelet transform was used to decompose the current of a spindle AC servo motor in the time and frequency domain. The feature vectors were extracted from the decomposed signals and compared to clarity normal and wear conditions. The results show the feasibility of the wavelet transform analysis for the tool condition monitoring.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.897-905
• /
• 2006

This study considers an experimental design of disturbance compensation control to improve stabilization performance of main battle tanks. An adaptive non-parametric design technique based on the Filtered-x Least Mean Square(FXLMS) algorithm is applied in the consideration of model uncertainties. The optimal compensator is designed by two-step design procedures: determination of frequency response function of the disturbance compensator which can cancel the disturbance of series of single harmonics by using the FXLMS algorithm and determination of the compensator polynomial which can fit the frequency response function obtained in the first step optimally by using a curve fitting technique. The disturbance compensator is applied to a simple experimental gun-torsion bar-motor system which simulates gun driving servo-system. Along with experimental results, the feasibility of the proposed technique is illustrated. Experimental results demonstrate that the proposed control reduces the standard deviation of stabilization error to 47.6% that by feedback control alone. The directional properties of the FXLMS Algorithm such as the direction of convergence and its convergence speed are also verified experimentally.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.367-371
• /
• 2004

This paper describes development of automatic flight control system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated now days use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of automatic flight control system is verified by flight test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1735_1736
• /
• 2009

This paper discusses about a robust servo system applying PID control to PMSM. The system has robustness by Sliding Mode Controller. A novel sliding surface is defined by virtual state. This sliding surface has nominal dynamics of an original PID control system. So Sliding Mode Control(SMC) technique can be used with PID controller. Its design is based on the augmented system whose dynamics have a higher order than that of the original system. The reaching phase is removed by using an initial virtual state whitch makes the initial sliding function equal to zero.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.152-157
• /
• 1992

The simple adaptive control(SAC) method has attracted attention for interest of the simple structure of its adaptive controller. We establish that the introduction of output derivative action to the original SAC system definitely improves the response characteristic of the control system. The effect of such an introduction is confirmed through experimental results by applying the method to a servo control system using a direct drive (DD) motor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.92-101
• /
• 2010

본 연구에서는 회전체를 지지하는 자기 베어링에 관하여, 2장에서는 적분형 서보계를 이용하여 횡축형 자기베어링 시스템(Horizontal-shaft Magnetic Bearing System: HMBS)에 대한 불확실성을 고려하면서 과도상태 응답개선에 대한 이론적인 고찰과 제어기설계 수식을 유도한다. 그리고 HMBS에 대해 물리 퍼래미터 변동에 대한 강인성과 외란의 영향을 저감하고 기준위치 변경에 따른 추종성을 갖도록 상태 피드백 제어기를 LMI 기법을 이용하여 설계한다. 3장에서는 설계한 제어칙을 가지고 시스템 불확실성의 변동에 대해 시간영역의 설계사양을 고려한 경우와 고려하지 않은 경우에 대하여 시뮬레이션을 행하고 실제 적용 가능성을 검토한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권8호
• /
• pp.1212-1219
• /
• 2009

본 연구에서는 실용설계의 새로운 도구로써 제어계의 강인성, 성능, 안정성 등의 설계지침을 정량화하기 쉽고 해가 효율적으로 구해져 주목받는 선형행렬부등식을 이용하여 강인한 LMI 제어기를 설계한다. 우선 다층상 구조물의 진동제어를 위해 수학적 모델링을 행하고 적분형 서보계를 적용한 LMI 제어 기법으로 상태 피드백 제어칙을 설계한다. 다음으로 설계한 제어칙으로 시스템 불확실성의 변동에 대해 시간영역의 설계사양을 고려한 경우와 고려하지 않은 경우에 대하여 시뮬레이션을 행하고 실제 적용 가능성을 검토한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.200-202
• /
• 2004

This paper deals with the real-time monitoring and control system using PC, PDA(Win CE embedded device) and PCS(based BREW platform). The camera attached to the server captures the moving target, and the captured frame of color image is encoded in JPEG for image compression at the server. The client(PC, PDA, PCS) receives the image data from the remote server and the received image is decoded from decompression. We use the TCP/IP protocol to send the image frames. The client can control the position of the camera by sending the control command to the server. Two DC servo motors for the camera are controlled in any directions, up-down and left-right, by the controller which is communicating with the server via the serial communication to get the control command. In this way, on the client we can monitor the moving images at the server and also control the position of the camera.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2748-2750
• /
• 1999

This Paper describes the design of an induction motor control using the TMS320C32 Digital Signal Processor and the ADMC201 motion coprocessor. Presented hardware architecture can be used for several industry applications with wide range of speed control, e.g. elevator and cranes application, servo motor, electrical vehicles. The main purpose of the paper is demonstration of the implementation and maximum utilization of the ADMC201 motion coprocessor in digital vector control system for AC drives.