• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.401-402
• /
• 2006

All-surface, all-tooth machining and roll forming of cast iron have been used to manufacture the crankshaft position sensor wheel (CPSW). However, these methods pose many problems such as difficult processing, high material cost, and low tooth precision. Thus, we developed a sintered CPSW with an improved detection ability in order to resolve the problems related with the previous methods of manufacturing CPSW by simplifying the process flow and improving tooth precision. The sintering process is introduced in this study. We conducted an experiment to compare the sintered and roll formed products and analyzed the results to evaluate the reliability of the sintering process. Furthermore, we compared and analyzed stress and displacement in the sintered and roll formed products through the "Finite Element Method(FEM)". According to the experimental and FEM results, the sintered product showed satisfactory mechanical properties. It was less expensive to process and lighter and showed better quality than the roll formed product. The results of this study could be applied to design an optimum CPSW using the sintering process.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.116-124
• /
• 1997

A scope of this study is to establish the optimum plasma spray conditions for fine ($5\mu\textrm{m}$) $Al_2O_3$ powder. However, the flowability of the $Al_2O_3$ powder is not so good because of irregular particle shape and fine particle size. Therefore, powder feeding system was modified by 1) change of powder feeding line material from polymer to copper 2) shorten the powder feeding tube length 3) heating the powder feeding system to $80^{\circ}C$4) vibrating the powder feeding line continuously, in order to feed the fine powder homogeneously. The homogeneous powder feeding conditions were obtained with the modified powder feeding system by controlling the powder carrier gas flow and the powder flow rate indicator. The best plasma spraying conditions for the fine $Al_2O_3$ powder were found out as 40kw gun power, 80 g/min. powder feed rate and 50 mm working distance after characterizing the microstructure, hardness and wear loss of the $Al_2O_3$ coating layer.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.125-134
• /
• 1997

This study was conducted by L9 orthogonal array to obtain optimum spray parameters for This study was conducted by L9 orthogonal array to obtain optimum spray parameters for $Cr_3C_2 - 7wt%$(80wt%Ni-20wt%Cr) coating powder. The factors were hydrogen flow rate, oxygen flow rate, gun-to-work distance, powder feed rate. And evaluation methods for the coating were surface roughness, oxygen concentration, micro-hardness, pore size and distribution, low angle ($30^{\circ}$) erosion rate, and microstructure of coating. The optimum HVOF spray conditions were proved as follows : hydroen flow rate ; 681 SLPM, oxygen flow rate ; 215 SLPM $H^2/O^2 ratio= 3.16), gun-to-work distance ; 22cm, powder feed rate; 25g/min. The hardness (Hv300) was 1147 and the erosion rate ($30^{\circ}$degree) was $3.16\times10^{-4}$g/g. It is believed that the optimized spray conditions can be improved the wear-resistance and anti-erosion characteristics of the coating.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 2004년도 추계학술대회
• /
• pp.53-53
• /
• 2004

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 춘계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.63-63
• /
• 2006

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.430-431
• /
• 2006

Thermoelectric thick film was fabricated by screen printing process with using p-type Bi-Te-Sb powders. The powder was synthesized by melting, milling and sintering process and hydrogen reduced to enhance the thermoelectric property. The thick film of Bi-Te-Sb powder was fabricated by screen printing method and baked at the optimized conditions. The thermal conductivity, the electrical resistivity and Seeback coefficient of thick film were measured and the thermoelectric performance was analyzed in terms of film characteristics and its microstructure. Finally, the feasibility of thermoelectric thick film into micro cooling device on CPU chip was discussed in this study.

• 기술사
• /
• 제12권1호
• /
• pp.12-20
• /
• 1979

화약(흑색화약)의 최초로 발명된 사실은 초석 의 제법 및 그 정제법과 밀접한 관계가 있다. 중국인들은 이미 11세기초부터 초석의 제법을 알고 있었으며, 그들이야말로 화약원료인 초석의 제법을 세계에서 가장 최초로 발명해 낸 사람들이다. 에지프트인들은 그것을 중국의 눈이라고 불럿으며, 초석이 유럽에 전파된 시기는 성길은오이 1218년 서정작업중 패르시아의 성첩를 공격하기 위하여 화약을 사용한데서부터 시작된 것으로 생각된다. 한국에 화약 및 초석의 제조기술이 중국으로부터 도입된 시기는 1374년이며 화약을 최초로 한국에서 만들어낸 사람은 최무선이였다. 이조시대에 접어 들면서 초석, 화약 및 화포의 제조기술은 최해신에 의해서 매우 발전해 나갔다. 그러나 1597년 일본의 왜군이 한국을 침공해 왔을때(임진란) 왜군은 성능좋은 조총으로 한국군을 괴롭혔으며 이에 맞서서 이순신장군이 이끄는 한국의 수군은 거북선에 장비한 성능좋은 화포로서 일본수군을 전멸시킬 수 있었다. 한국의 근대화약기술은 1930년부터 1945년 사이에 4개의 화약공장이 건설됨으로서 매우 발전했다. 본 연구는 한국에 화약기술이 전래된 경위를 조사하였으며 차후화약기술에 대해서 연구하고져 하는 연구자에게 연구 자료를 제공 하고져 시도했다.

• 화약ㆍ발파
• /
• 제9권4호
• /
• pp.13-21
• /
• 1991

This study is concerned with the disasters that occure in the field of industrial explosives and analyzed by two side the disaster of the manufacturing factory and that of the field, and is studied about the safety and the countermeasure. The industrial explosives accidents occure just accidentaly and unforeseeable, and reappearance experiments are more difficult. The 3E of J.H. Harvey was applied in this study to establish the counter measure of preventation of accidents, overcoming these restricted factores. As a method of technical safety countermeasures. The blasting vibration formula which had been conformed from the Seoul Subway Construction work during 1980-1984 year, was uilized, and, using the formula $V=Kw^{0.5}D^{-1.5}$ for the gneiss which is widely distributed in Pusan area, an index of the minimum and maximum amount of gun powder, to be used according to safety distance was made, and it helped the gun powder managing technician's practical business. During the fore work discharging, the safety distances of felling were theoretically established based on the writer ${\diagdown}s$ experiences of more than 10 years on this field.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.397-398
• /
• 2006

In late years, from a trend for ecology of auto motive engine, low emission and low fuel consumption of engine become a social assignment. At the same time, the high output (high efficiency) is required, too. In order to meet those requirements, in comparison with conventional engines, lean A/F (Air fuel ratio) setting is becoming popular for the high performance engines of late years. Exhaust valve seat (sintered material) used in these engines has a problem in wear resistance, because it is exposed to the surroundings that is clean and a high temperature in comparison with the conventional engines. Therefore, wear mechanism with lean A/F of engine was analyzed.The exhaust valve seat (sintered material), that was superior in wear resistance, was developed.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.120-125
• /
• 2003

This research analyzes blasting accident cause that is happening construction and engineering works spot taking advantage of AHP (Analytic Hierarchy Process) techniques as metrical. Result that apply AHP with blasting accident that is happened the South Korea and Japan, appeared by thing which relative importance by human cause is highest. Specially, it is observance of safety rule that dominate the highest ratio among of human cause, and if observe a little, causes that prevention is possible are much. By result of this research, necessity of safety education is important first of all for prevention of blasting accident. Also, thorough safety control plan of during work and enough on-the-slut probe before work should be established. Because explosives uses gunpowder and explosive high energy, work by qualified person is essential. Ant it may become help to minimize dissipation of important life and property preventing beforehand explosion accident of gunpowder.