• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.332-341
• /
• 2010

Standard dimensionless parameters cannot simultaneously represent all operation modes of a pump-turbine. They either have singularities at E=0 and multiple values in the 'unstable' areas, or else get singular at n=0. P. Suter (1966) introduced an alternative set of variables which avoids singularity and always remains unique-valued. This works for non-regulated pumps but not so well for regulated machines. A modification by C.S. Martin avoids distortion at low load. The present paper describes further improvements for the representation of torque, and for closed gate (where Suter's concept does not work). The possibility to interpolate across all operation modes is likewise useful for representing other mechanical parameters of the machine. Practical application for guide vane torque and pressure pulsation data is demonstrated by examples.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.198-202
• /
• 2003

A small circulating water channel (CWC) for experiments ocean engineering is designed and made through the co-work of a company, MESTEC, and a college, Inha Technical Research Institute. General function of the elements of CWC are explained. The velocities in the test section are measured and analysed to estimate the performance of the CWC. The result of the velocity distribution is acceptable for experiments of ocean engineering.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권1호
• /
• pp.83-88
• /
• 2016

This paper describes the test results of plant minimum stable load (Pmin) for Ilijan Power Plant. The test was conducted on May 13 through 14, 2015 to investigate the plant operating and equipment condition in accordance with "Ilijan Plant Performance Test Procedure on Plant Minimum Stable Load" [1]. This paper also contains the assessment of the impact of Pmin to plant operating parameters and possible technical operating issues when operating at lower loads and to recommend the safe minimum load operation of Ilijan per block. In addition, this paper describes the performance calculation results of efficiency and heat rate depending on the load level.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.689-693
• /
• 2015

Recently, many advanced countries are devoted to the development of eco-friendly new-renewable energy to prepare for the depletion of resources. Korea belongs to the absolute lack of energy to import from abroad 97% of energy use. So, development and supply of eco-friendly energy such as small hydro power has been required even more. Our country has a large number of small-sized reservoirs and dams. So, hydro generator has been installed at the small reservoirs and dams with the economy. Since the discharge flow of agricultural reservoir is not constant, the guide vane of wicket gate is used for adjusting the output of the generator.

• 한국연소학회지
• /
• 제10권4호
• /
• pp.10-17
• /
• 2005

Sustaining of flame stability of the burner installed in Dielsel exhaust pipe is very difficult because of steep fluctuation of pressure and flow rate. A burner for DPF (Diesel Particulate Filter) which clogged by collected soot regeneration has been made of metal fiber for the purpose of realization of flame stability even in unfavorable condition of Diesel engine exhaust. Flame stability of the metal fiber burner has been investigated in various condition of engine operation. It has been identified that metal fiber burner with liner which has swirl guide vane presents excellent flame stability even in the higher engine revolutions than 3000rpm and sudden variation. The results offer the possibility of development of full flow burner system for DPF regeneration.

• 한국농공학회지
• /
• 제7권1호
• /
• pp.843-849
• /
• 1965

Some simple devices to demonstrate important hydraulic principles to students are necessitated in fluid mechanics or hydraulics classes. These devices should\ulcorner be easy to make and operate with inexpensive cost. The writer has studied some simple demonstrhation apparatus of hydraulic principles which were made with cheap materials. The purpose of this paper is to present the results of the study. In this paper, hydraulic principles that can be demonstrated by using these apparatus are described, the plans of them are presented, and how to make them and what materiaIs to be used are briefly explained. An axial-flow fan is a device with which the flow of air is supplied for several purposes. It consists of a duct, a fan and a guide vane. It may be possible to demonstrate the principles of propeIler,drag force, lift, etc.

• 한국분무공학회지
• /
• 제24권3호
• /
• pp.130-136
• /
• 2019

Spray visualization of a vaporizer fuel injection system of a micro turbo jet engine was experimentally studied. The fuel heating by combustion was simulated by the high pressure steam generator and combustor inlet air from the centrifugal compressor was simulated by compressed air stored in the high pressure air tank. Spray visualization was performed with single vaporizer, and then six vaporizers which are same number of micro turbojet engine were used. As a results, the spray characteristics of the vaporizer were understood with pressure difference of the combustor inlet air and the fuel supply pressure. Spray angles with three types of vaporizer configuration were measured. In the results, guide vane configuration has a wider spray angle than the straight tube and smooth curve tube with a swirler, so it is expected that the fuel will be effectively distributed inside the combustor flame tube.

• International Journal of Fluid Machinery and Systems
• /
• 제7권2호
• /
• pp.42-53
• /
• 2014

Phase resonance in Francis type hydraulic turbine is studied. The phase resonance is a phenomenon that the pressure fluctuation in the penstock of hydraulic turbine installation can become very large when the pressure waves from each guide vane caused by the interaction with the runner vane reach the penstock with the same phase. Experimental and numerical studies have been carried out using a centrifugal fan. In the present study, comparisons between the pump mode and the turbine mode operations are made. The experimental and numerical results show that the rotational direction of the rotor does not affect characteristics of the pressure fluctuation but the propagation direction of the rotorstator interaction mode plays an important role. Flow rate fluctuations through the stator are examined numerically. It has been found that the blade passing flow rate fluctuation component can be evaluated by the difference of the fluctuating pressure at the inlet and the outlet of the stator. The amplitude of the blade passage component of the pressure fluctuation is greater at the stator inlet than the one at the stator outlet. The rotor-stator interaction mode component is almost identical at the inlet and the outlet of the stator. It was demonstrated that the pressure fluctuation in the volute and connecting pipe normalized by the flow rate fluctuation becomes the same for pump and turbine mode operations, and depends on the rotational direction on the interaction mode.

• 한국물환경학회지
• /
• 제18권3호
• /
• pp.303-312
• /
• 2002

본 연구에서는 기존 배관설비 분야에서 다양한 용도로 사용되고 있는 Polly-Pigs를 이용한 건물내 급수관의 스케일을 제거하기 위한 공법을 개발하여 이를 평가하였다. 15mm 노후관의 세관실험결과, KDP series에 의해서 직관부 또는 곡관부의 통수능은 3.5~15.4%까지 증가되는 것으로 나타났으며, 육안분석결과 대부분 제거가 이루어진 부분은 적색 스케일($Fe_2O_3{\cdot}3H_2O$)이었으며, 흑색 스케일($Fe_2O_4{\cdot}nH_2O$)의 제거에는 한계가 있는 것으로 나타났다. 그러나 KDP series의 겉표면에서 Fine sand를 coating한 KDPS series에 의해서는 sand의 효과로 노후관의 통수능이 13.0~17.9%까지 증가되어 통수능이 95.9~99.5%까지 높게 회복되는 것으로 나타났으며, 대부분의 흑색 스케일도 크게 제거되는 것으로 나타났다. 또한 Cleaning v/v의 나선형 가이드 베인(Helical guide vane)과 Pigs의 회전날개(Rotating wing)의 영향으로 주행시 Pigs의 회전력은 크게 향상되어 16배이상 회전수가 증가하는 것으로 나타났다. 이로 인해 100mm 급수관의 세관에서는 통수능이 90%인 노후관이 세관 후 통수능이 완전히 회복되는 것으로 나타났다. 또한 15mm 급수관에 비하여 매우 낮은 압력하에서도 세관효과가 높은 것으로 나타나 관경이 클수록 세관에 필요한 세관압력은 크게 감소되며, 세관효과는 증가되는 것으로 나타났다.

• 한국해양환경ㆍ에너지학회지
• /
• 제14권1호
• /
• pp.11-18
• /
• 2011

암초형 월류 파력발전 시스템은 암초형 구조물에 입사 되는 파랑 에너지를 낙차로 전환하고 이를 전기 에너지로 변환 시키는 파력 발전 방식이다. 기존 연구에서 월파제의 사면 경사, 천단고, 가이드 베인 형상에 따른 월류 성능이 연구 되었다. 본 연구에서는 이러한 기존 연구를 통해 설계된 1/7 축소 모형을 제작하고 수차 터빈 및 발전 시스템, 전력제어시스템, 운전제어 및 모니터링 시스템을 연계하여 통합 축소 모형 시스템을 구축하였다. 이러한 시스템에서 서로 다른 파고와 주기를 갖는 파에 따른 월류량과 발전량을 계측하여 기존 연구와 비교 검증하였다. 이를 통해 설계시 계획한 월류량과 발전량을 확인하였고 다수 터빈에 의한 효율적인 제어 시스템 구동 방안을 제안하였다.