• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.126-134
• /
• 2006

Traditional TCP implementations have the under-utilization problem in large bandwidth delay product networks especially during the startup phase. In this paper, we propose a delay-based congestion control(DCC) mechanism to solve the problem. DCC is subdivided into linear and exponential growth phases. When there is no queueing delay, the congestion window grows exponentially during the congestion avoidance period. Otherwise, it maintains linear increase of congestion window similar to the legacy TCP congestion avoidance algorithm. The exponential increase phase such as the slow-start period in the legacy TCP can cause serious performance degradation by packet losses in case the buffer size is insufficient for the bandwidth-delay product, even though there is sufficient bandwidth. Thus, the DCC uses the RTT(Round Trip Time) status and the estimated queue size to prevent packet losses due to excessive transmission during the exponential growth phase. The simulation results show that the DCC algorithm significantly improves the TCP startup time and the throughput performance of TCP in large bandwidth delay product networks.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.365-371
• /
• 2019

In this study, the flame temperature distribution of the diffusion flame burner for SiO₂ deposition was analyzed by the computational fluid analysis. This corresponds to the previous step for simulating the SiO₂ preform deposition process for manufacturing optical fibers using environmentally friendly raw materials. In order to model premixed combustion, heat flow, convection, and chemical reactions were considered, and Reynolds-averaged Navier-Stokes equations and k-ω models were used. As a result, the temperature distribution of the flame showed a tendency to increase the distance from the nozzle surface to the maximum temperature when the flow rate of the auxiliary oxygen increased. In addition, it was confirmed that the temperature distribution due to incomplete combustion was large in the combustion reaction with a large equivalence ratio of the mixed gas.

• Korean Business Review
• /
• v.16
• /
• pp.77-97
• /
• 2003

The Korean government issues the policy that regional government mat change the regional tax rates for economic growth. On the ground that change in regional tax rate incurs the disturbance in regional economy and entails tax competition, regional government does not accept the proposal. The CGE simulation result shows that tax competition reveals the trade-off relation between efficiency, balanced national development, and equity. Thereby, the stance of regional government can be justified by the results. Therefore central government has to grope for some reconcile means that efficiency and equity can be harmonized. The proposal can be justified by the analyses.

• Journal of Biosystems Engineering
• /
• v.39 no.1
• /
• pp.1-10
• /
• 2014

Purpose: This research was conducted to evaluate feasibility of a crank-type walking cultivators for weeding in furrowed upland. Methods: A walking cultivator developed by RDA was selected and evaluated with its working speed (S), cultivation depth (CD) and weeding performance (WP). The evaluation was performed in upland field on July and August, 2012. Also kinematic analysis of the machine was performed to draw out design improvements. Results: S in flat, uphill and downhill were about 0.11 m $s^{-1}$, 0.11 m $s^{-1}$, and 0.13 m $s^{-1}$ respectively. It was found that S had a low relevance with user conditions. The CD was 35 ~ 40 mm which was satisfied with the RDA guide for weeding machine. A wide variation was observed in values of WP depending on the growth stages of weeds and field conditions. The cultivator showed low performance in eliminating the well-grown weeds. Kinematic simulation revealed that high forward speed caused a high ratio of un-weeded area. Conclusions: The weeding performance of the cultivator was satisfactory for weeds in early growth stage but it showed difficulties in handling on up-slope and in entering up-land. Specifically, the weight of the cultivator was judged as overweight for female workers. The crank-hoe type cultivator was judged as unsuitable for small walking type machine due to weight of the four-bar linkage system. Kinematic analysis revealed that the ratio of crank speed to the ground speed must be 850 rpm s $m^{-1}$ (255 rpm based on 0.3 m $s^{-1}$) or greater to avoid uncultivated area. Selection of forward speed is a decisive factor in designing the weeding cultivator.

• Atmosphere
• /
• v.26 no.1
• /
• pp.141-158
• /
• 2016

The objective of this study is to examine the impact of urban canopy and the horizontal resolution on simulated meteorological variables such as 10-m wind speed, 2-m temperature and precipitation using WRF model for a local, convective rainfall case. We performed four sensitivity tests by varying the use of urban canopy model (UCM) and the horizontal resolution, then compared the model results with observations of AWS network. The focus of our study is over the Seoul metropolitan area for a convective rainfall that occurred on 16 August 16 2015. The analysis shows that mean diurnal variation of temperature is better simulated by the model runs with UCM before the convective rainfall. However, after rainfall, model shows significant difference in air temperature among sensitivity tests depending on the simulated rainfall amount. The rainfall amount is significantly underestimated in 0.5 km resolution model run compared to 1.5 km resolution, particularly over the urban areas. This is due to earlier occurrence of light rainfall in 0.5 km resolution model. Earlier light rainfall in the afternoon eliminates convective instability significantly, which prevents occurrence of rainfall later in the evening. The use of UCM results in a higher maximum rainfall in the domain, which is due to higher temperature in model runs with urban canopy. Earlier occurrence of rainfall in 0.5 km resolution model is related to rapid growth of PBL. Enhanced mixing and higher temperature result in rapid growth of PBL, which provides more favorable conditions for convection in the 0.5 km resolution run with urban canopy. All sensitivity tests show dry bias, which also contributes to the occurrence of light precipitation throughout the simulation period.

• Composites Research
• /
• v.18 no.3
• /
• pp.21-30
• /
• 2005

Vacuum hot pressing has been used for the development of titanium metal matrix composites using foil-fiber-foil method. Heterogeneous microstructures prior to and following consolidation have been quantified, and the relations to densification behavior investigated. As shown by the results, dramatic variations of the microstructures including equiaxed $\alpha$, transformed $\beta$ and $ Widmanst\ddot{a}tten$ $\alpha$ are obtained during the process according to the fiber distributions. The dependence of microstructures on the consolidation then has been explained in terms of the change in mechanisms such as grain growth and recrystallization that occur with changing levels of inhomogeneity of deformation. Further, micro-mechanics based constitutive model enabling the evolution of density over time together with the evolutions of microstructure to be predicted has been developed. The mode developed is then implemented into finite element scheme so that practical process simulation has been carried out.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.398-405
• /
• 1997

과거 8년간의(1985-1992) 통계에 의하면 정면과 측면 충돌시 구속 시스텡의 하나인 Airbag장착 차량의 사망자 및 중상자 수가 현저히 감소하고 있는 것으로 나타나고있다. 그 러나 최근 소비자로 부터의 Airbag에 관한 불만을 보고 받고 있다. 즉 구속효과를 발휘함에 있어 부수적으로 인체 부상을 유발하고 있다는 것이다. 사망내지는 심각한 부상은 방지하고 있으나 경미한 부상은 오히려 증가하고 또한 신체가 적은 여성 운전자나 6세 이하의 어린이 에게는 심각한 부상의 우려가 있다는 것이다. 본 연구에서는 구속시스템의 총아인 Airbag 시스템의 심각한 부수적인 부상 보고를 입증하기 위하여 우리나라 어린이 6세 신체를 기준 으로하여 구속시스템을 착용하지 않았을 경우(실제로 많은 경우), seat belt만 착용시, Airbag만 작용시, 그리고 seat belt와 Airbag을 동시에 사용할 때를 컴퓨터 Simulation Package 이용 신체 dynamic을 모의실험 하였다. 실험결과, 기존에 알려진바와 같이 구속시스템을 사용하지 않았을 경우에 부상은 매우 컸다. 신체 사이즈가 작은 어린이 혹은 여성 운전자의 경우 Seat belt만을 사용한 경우는 Airbag만을 사용한 경우보다는 부상정도가 약간 경미하였으나 두 경우 모두 인체가 구속시스템의 구속 범위를 이탈하여 구속 시스템으로써의 역할을 충분히 하지 못하고 있었다. 특히 Seat belt와 Airbag을 동시에 사용하였을시에도 Airbag이 충분히 개선된 이후라도 신체 사이즈가 작은 경우에는 흉부부위에 의한 충격 흡수가 먼저 이루어지지 못하고, 머리에 먼저 Airbag이 접촉이 되어 충격 흡수 역할보다는 반동효과가 더 커서 머리 및 몸체가 뒤로 Rebound 하는 효과로 머리, 혹은 목의 신체 부상한계를 넘고 있어 큰 부상 내지는 사망에 이르고 있음을 알 수 있었다. 사료된다.의 결과는 자전거 에르고노미터의 결과가 트레드밀의 결과에 87.60%정도 나타났다.음을 관찰하였다. 특히 vitamin C와 E의 병용투여는 상승적으로 적용하여 간세포손상을 더욱 억제시킴을 알 수 있었다.mance and on TFP(Total Factor Productivity) growth which is a pure measure of firm performance. To utilize the advantage of panel data, FEM(Fixed Effect Model) and REM(Random Effect Model) were used. The empirical result shows that the entropy index as a measurement of inter-business relatedness is not significant but technological relatedness index is significant. OLS estimates on pooled data were considerably different from FEM or REM estimates on panel data. By introducing interaction effect among the three variables for business portfolio properties, we obtained three findings. First, only VI (Vertical integration) has a significant positive correlation with ROS. Second, when using TFP growth as an dependent variable, both TR(Technological Relatedness) and f[ are significant and positively rel

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.285-309
• /
• 1996

Non oxide ceramics such as nitrides of transition metals have shown significant potential for future economic impact, in diverse applications in ceramic, aerospace and electronic industries, as refractory products, abrasives and cutting tools, aircraft components, and semi-conductor substrates amid others. Combustion synthesis has become an attractive alternative to the conventional furnace technology to produce these materials cheaply, faster and at a higher level of purity. However he process os highly exothermic and manifests complex dynamics due to its strongly non-linear nature. In order to develop an understanding of this process and to study the effect of operational parameters on the final outcome, numerical modeling is necessary, which would generated essential knowledge to help scale-up the process. the model is based on a system of parabolic-hyperbolic partial differential equations representing the heat, mass and momentum conservation relations. The model also takes into account structural change due to sintering and volumetric expansion, and their effect on the transport properties of the system. The solutions of these equations exhibit steep moving spatial gradients in the form of reaction fronts, propagating in space with variable velocity, which gives rise to varying time scales. To cope with the possibility of extremely abrupt changes in the values of the solution over very short distances, adaptive mesh techniques can be applied to resolve the high activity regions by ordering grid points in appropriate places. To avoid a control volume formulation of the solution of partial differential equations, a simple orthogonal, adaptive-mesh technique is employed. This involves separate adaptation in the x and y directions. Through simple analysis and numerical examples, the adaptive mesh is shown to give significant increase in accuracy in the computations.

• Asian Journal of Turfgrass Science
• /
• v.11 no.2
• /
• pp.117-124
• /
• 1997

This study was carried out to investigate the growth and branching pattern of stolons at Korean lawn(Zoysia japonica Steud.) in the field condition. The results were summarized as follows ; 1.About 80% of observed lawns had one primary stolon. Among the lawns with several primary stolons, 30% of them had two primary stolons, 63% had three, and 7% had four. 2.The angles between the primary stolon and the shoot were increased from 0˚ to 52˚ according to the node order from the terminal shoot apex, and reached maximum angle at the 7th node. 3.The internode length was the longest in the middle position of stolon, and its growing rate which depends on months was increased from May to September. 4.The branching angles between primary and secondary stolon were from 44˚ to 53˚ in each node. The average left branching angle was about 48.20, right branching angle 47.8˚, and the total average branching angle was 48.00. 5.The rate of initial brabch was the highest at the 10th node in May, the 7th node in July and the 5th node in September. But, the initial branching rate at the 7th node in July was higher than any other that at the 10th node in May and the 5th node in September. 6.The distribution rate of secondary stolon in each node of primary stolon was the highest at the 7th node. 7.when the terminal shoot apex of primary stolon was damaged mechanically, the branching rate at the first node after the damaged region was highly increased to 62%. The results of this study may be suggested that the secondary stolon begins to branch with the angle of 480 from the 7th node of the normal primary stolon, and those may be used as a basic data for the branching simulation in lawn.

• Convergence Security Journal
• /
• v.13 no.4
• /
• pp.93-100
• /
• 2013

In 2012, According to 'Cisco Global Cloud Index 2011-2016', the Cisco company forecasted that global data center traffic will nearly quadruple and cloud traffic will nearly sextuple by 2016. Such a rapid growing of traffic is caused by traffic inside the data center and cloud computing workloads. In 2010, the Ministry of National Defense decided to build a Mega Center including the cloud computing technology by 2014, as part of the '2012 Information Service Plan', which is now underway. One of the factors to consider is cloud computing traffic to build a Mega Center. Since the K-defense cloud computing system is built, K-defense cloud computing traffic will increase steadily. This paper, analyzed the availability of K-defense cloud computing service with the K-defense cloud computing traffic increasing using K-Defense cloud computing test system and CloudAnalyst simulation tool. Created 3 scenarios and Simulated with these scenarios, the results are derived that the availability of K-defense cloud computing test system is fulfilled, even cloud workloads are increased as muh as forecasted cloud traffic growth from now until 2016.