• Communications for Statistical Applications and Methods
• /
• 제14권3호
• /
• pp.497-506
• /
• 2007

Coverage-based NHPP SRGMs have been introduced in order to incorporate the coverage growth behavior into the NHPP SRGMs. The coverage growth function representing the coverage growth behavior during testing is thus an essential factor of the coverage-based NHPP SRGMs. This paper proposes a class of discrete time coverage growth functions and illustrates its application to real data sets.

• 한국결정성장학회지
• /
• 제25권6호
• /
• pp.231-238
• /
• 2015

사파이어 단결정은 GaN계 화합물 증착이 용이하여 고휘도 LED(Light Emitting Diode), 고출력 레이저 산업 등에서 크게 각광받고 있다. 다양한 사파이어 단결정 제조공법 중 vertical Bridgman 공법은 고품질의 사파이어를 c-축 방향으로 성장시킬 수 있는 공법이며 상업적으로 적용이 검토되고 있다. 본 연구에서는 2인치 사파이어 성장 vertical Bridgman 공정에서 성장시 온도구배에 의해 발생하는 열응력을 유한요소 모델을 통해 분석하였다. 이를 통해 성장시 수직, 수평방향으로의 온도구배가 사파이어 결정의 열응력과 결함발생에 미치는 영향을 검토하였다.

• ALGAE
• /
• 제17권2호
• /
• pp.83-87
• /
• 2002

Photosynthetic parameters of Scendesmus quadricauda, such as the maximum photosynthetic rate ($P_{max}$), photosynthetic efficiency (α) and the initial saturation intensity of irradiance for photosynthesis ($I_K$) were obtained using photosynthesis-irradiance (P-I) curve in a phosphorus-limited chemostat. S. quadricauda exhibitied no photoinhibition until at 200 μmol·$m^{-2}$ . $P_{max}$ (r=0.963, P=0.002) and $I_K$(r=0.904, P=0.013) showed linear relationships with growth rate. Chlorophyll-α concentration and cell dry weight decreased at higher growth rates, ut chlorophyll-α content per cell dry weight increased. The increase in photosynthetic rates at higher growth rates was due to the increase of $P_{max}$ and $I_K$ which was caused mainly by the increase in the absolute amount of chlorophyll-α rather than the increased photosynthetic efficiency of individual chlorphyll-α. The α did not show a significant relationship with growth rate (r=0.714, P=0.111). The cell quota of carbon (r=0.554, P=0.254) was not correlated with growth rate, but cell quota of nitrogen (r=0.818, P=0.047) and phosphorus (r=0.855, P=0.030) exhibited linear correlations with growth rate.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.98-106
• /
• 2014

This study was carried out to evaluate the plant growth rate according to the wavelength characteristics of LED light sources. In order to achieve this, red, green, blue and white LEDs were arrayed in a rectangle array consisting of LED modules which can be combined with each other.. This can facilitate the selection of the optimal characteristics of the light from monochromatic red, green, blue and white LEDs or mixed LEDs for plant growth. Experiments to evaluate the growth rate according to the wavelength characteristics of the LEDs with several plants, in this case ice plants, lettuce, barley, broccoli and chives, were performed.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.42-48
• /
• 2006

In order to assess the validity of fatigue crack arrest design charts obtained from our previous numerical approach to fatigue crack arrest condition, an extensive fatigue crack growth/arrest test was performed using CT-type integrally stiffened panels. The results are presented as fatigue crack growth rate and non-dimensional crack length relationship, and these are compared with numerically simulated crack growth rates. The measured values of da/dN at the moment of fatigue crack arrest occurred in stiffened panels are good agreement with those numerically simulated crack growth rates.

• 한국분말재료학회지
• /
• 제12권4호
• /
• pp.261-265
• /
• 2005

In order to fabricate complex-shaped polycrystalline ceramics by sintering, organic binders are usually pre-mixed with ceramic powders to enhance the formability during the shape forming process. These organic binders, however, must be eliminated before sintering so as to eliminate the possibilities of poor densification and unusual grain growth during sintering. The present work studies the effect of binder addition on grain growth behavior during sintering of $92(70Pb(Mg_{1/3}Nb_{2/3})O_3-30PbTiO_3))$-8PbO(mol%) piezoelectric ceramics. The microstructures of the sintered samples were examined for various heating profiles and debinding schedules of the binder removal process. Addition of Polyvinyl butyral(PVB) binder promoted abnormal grain growth especially in incompletely debinded regions. Residual carbon appears to change the grain shape from comer-rounded to faceted and enhance abnormal grain growth.

• 한국기계가공학회지
• /
• 제4권2호
• /
• pp.50-56
• /
• 2005

To demonstrate the feasibility of utilizing FCAD chart proposed in our previous work, series of crack growth/arrest behavior in the integrally stiffened panels were simulated by numerical method using upper mentioned FCAD charts and a new crack growth rate equation. It is concluded that proposed family of FCAD curves, in the form of non-dimensional arrest load ranges, are reliable indicators of fatigue crack growth/arrest behavior of integrally stiffened panels considered here.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.40-45
• /
• 2000

Presented are the estimation of the probability distribution of fatigue crack growth life and reliability assessment of structures by simulating material resistance to fatigue crack growth along a crack path. The material resistance is treated as a Weibull stochastic process. A non-Gaussian stochastic fields simulation method proposed by Shimozuka, et al is applied with the statistical data obtained experimentally. Test results are obtained for $\Delta$K constant amplitude load in tension with stress ratio of R=0.2 and three specimen thicknesses of 6, 12 and 18mm. This simulation method is useful to estimate the probability distribution of fatigue crack growth life and the smallest life.

• 대한전자공학회논문지
• /
• 제21권4호
• /
• pp.17-23
• /
• 1984

A model analysis of pattern shift in the epitaxial growth of silicon on (111) substrates was performed. The growth rate anisotropy was considered as the most important affecting factor of pattern shift, and for the model establishment the off angle of the substrate and the process temperature were taken as the variables. We derived a theoretical equation of pattern shift by assuming the growth rate anisotropy as the trigonometric sine function of the off angle of the substrate and defining the growth rate anisotropy factor related to the process temperature. The pattern shift ratio calculated by this model had the same tendency with the experimental ones, which, however, were about twice greater than those. It was supposed that this discrepailcy was due to the second order affecting factor such as facetting and step broadening which had been exluded in model establishment.

• 한국결정성장학회지
• /
• 제27권3호
• /
• pp.105-109
• /
• 2017

고주파 유도 가열 장치를 이용하여 승화법으로 성장된 AlN 단결정을 질소 분위기 하에서 $1200^{\circ}C$와 $1500^{\circ}C$에서 열처리하였다. 열처리 후 단결정 시편들의 표면을 광학현미경으로 관찰하였으며, DCXRD(Double crystal X-ray Diffractometry)를 이용하여 FWHM(Full width of half maximum) 값을 측정하여 결정성의 변화를 평가하였다.