• Journal of Powder Materials
• /
• v.5 no.4
• /
• pp.324-328
• /
• 1998

This paper is aimed to study the computer simulation of sintering process for ceramics by Monte Carlo and molecular dynamics methods. Plural mechanisms of mass transfer were designed in the MC simulation of sintering process for micron size particles; the transfer of pore lattices for shrinkage and the transfer of solid lattices for grain growth ran in the calculation arrays. The MD simulation was performed in the case of nano size particles of ionic ceramics and showed the characteristic features in sintering process at atomic levels. The MC and MD simulations for sintering process are useful for microstructural design for ceramics.

• Bulletin of the Korean Mathematical Society
• /
• v.33 no.3
• /
• pp.487-496
• /
• 1996

Let f(z) be an entire function. Then the order $\rho(f)$ of f is defined by $$ \rho(f) = \overline{lim}_r\to\infty \frac{log r}{log^+ T(r,f)} = \overline{lim}_r\to\infty \frac{log r}{log^+ log^+ M(r,f)}, $$ where T(r,f) is the Nevanlinna characteristic of f (see [4]), $M(r,f) = max_{$\mid$z$\mid$=r} $\mid$f(z)$\mid$$ and $log^+ t = max(log t, 0)$.

• 전기의세계
• /
• v.22 no.2
• /
• pp.11-18
• /
• 1973

This paper reports some results of Si and SiO$_{2}$ films obtained from the expitaxial growth by hydrogen reduction of SiCI$_{4}$ with a hydrogen and carbon dioxide mixture in an epitaxial-deposition chamber. The deposited Si and SiO$_{2}$ are studied by observing the process parameters affecting the rate of deposition, and the quantitative properties at the interface of Si and SiO$_{2}$ are also considered briefly according to the results of the optical absorption and the voltage-current characteristic of MOS etc. using step etching procedure for oxide films.

• Journal of the Korean Regional Science Association
• /
• v.13 no.2
• /
• pp.45-54
• /
• 1997

A regional economy is characterized as a spatial economy. However the literature shows that it has been treated as a point economy since space is little recognized in regional modeling due to mathematical complication. This leads to the fact that regional model does not sufficiently represent regional characteristic. This paper attempts to construct a regional growth model in a partial equilibrium framework specifically taking into consideration land as a primary factor. The model is formulated largely neoclassical. Labor is assumed to move in response to differences in the wage rate, while capital is perfectly mobile across regions. The paper shows that two growth equilibrium points exist, one stable equilibrium point and the other unstable equilibrium point. The unstable growth equilibrium indicates the existence of minimum threshold that a region must overcome the minimum threshold to grow constantly. Consequently, directions of regional growth are characterized by two growth paths depending on the initial condition of a region. That is to say, a region below the minimum threshold is converging toward the lower stable equilibrium point over time. When a regional economy initially lies above the minimum threshold, it will grow forever. A regional economy is not thus necessarily converging a stationary is not thus necessarily converging a stationary equilibrium point through factor movement. Finally, the impacts of the presence of agglomeration economies and diseconomies are analyzed through the phase diagram. The paper also shows that agglomeration economies result in lowering the minimum threshold and in escalating the level of stable equilibrium However, when agglomeration diseconomies prevail, the results are opposite, i.e., rising the minimum threshold of growth and lowering the growth level of stable equilibrium.

• Corrosion Science and Technology
• /
• v.18 no.1
• /
• pp.33-38
• /
• 2019

Alloy 600/182 with excellent mechanical/chemical properties have been utilized for nuclear power plants. Although both alloys are known to have superior corrosion resistance, stress corrosion cracking failure has been an issue in primary water environment of nuclear power plants. Therefore, primary water stress corrosion crack (PWSCC) growth rate tests were conducted to investigate crack growth properties of Alloy 600/182. To investigate PWSCC growth rate, test facilities including water chemistry loop, autoclave, and loading system were constructed. In PWSCC crack growth rate tests, half compact-tension specimens were manufactured. These specimens were then placed inside of the autoclave connected to the loop to provide primary water environment. Tested conditions were set at temperature of $360^{\circ}C$ and pressure of 20MPa. Real time crack growth rates of specimens inside the autoclave were measured by Direct Current potential drop (DCPD) method. To confirm inter-granular (IG) crack as a characteristic of PWSCC, fracture surfaces of tested specimens were observed by SEM. Finally, crack growth rate was derived in a specific stress intensity factor (K) range and similarity with overseas database was identified.

• International Commerce and Information Review
• /
• v.9 no.4
• /
• pp.91-104
• /
• 2007

The recent stabilization of the Internet is now driving every aspect of life into an Internet presence. In the coming years, the Internet will see growth in numbers unlike the world has ever seen. The subject of this study is the Research Study on the Products Purchase Type of On-line Shopping Mall Buyer. Also, this paper is to examine the relations between customer satisfaction and intensity of repurchase intention and complaining behavior in on-line context. On-line shopping customer depths interview it led and the online afternotes trust evaluation dimension was discovered the of useful characteristic, intention characteristic, exaggerating characteristic and on-line afternotes with or without. From these results, this paper suggests effective marketing strategy to the marketer who plans to run on-line shopping mall in the near future and also to the marketer who plans to sell products through the on-line shopping mall.

• Korean Journal of Veterinary Research
• /
• v.36 no.1
• /
• pp.131-142
• /
• 1996

The effect of relative humidity in swine house on swin pleuropneumonia was examined in piglets experimentally infected with Actinobacillus pleuropneumoniae serotype 5. A total of 20 piglet were grown under 30~40%, 41~50%, 51~64% and 65~80% relative humidity chambers after intratracheal inoculation of A pleuropneumoniae. Characteristic fibrinous pleuropneumonia was observed in the pigs grown at the low relative humidity groups. The detailed results were as follows : 1. Growth performance and environment conditions were lower than high relative humidity groups. 2. Characteristic histopathological findings were fibrinous pleuritis and pneumonia accompanied congestion, hemorrhage, thrombosis and edematous change. 3. Antigenic distribution of inoculated bacterium was found mainly in alveolar macrophages or accumulated foci of macrophages adjacent to necrotic area. 4. Characteristic electron microscopic findings were proliferation of type II pneumocyte with increased lamella bodies and activated alveolar macrophages with pseudopods and widening of interstitium.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.157-162
• /
• 2003

Nakdong estuary is located at south-eastern coast of the Korea. A lot of sediment from upper river were deposited at this area. It has cause many problem such as changes in topography and tidal current. Changes of characteristic of deposition were cause by topographic change of nakdong estuary. Analyzing and evaluating data, we could predict the direction of movement of the sand bar and the growth toward south-eastern of Nakdong estuary. It was caused by decreasing river discharge after construction of Nakdong-kang barrage.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.274-278
• /
• 2007

The purpose of this study is to analyze the important loads related with crack-growth in aircraft. Al Alloys mainly used in aircraft are Al2024 and Al7075 in Duralumin. In random fatigue loading, it has been understood crack-growth characteristic using fractured surface photograph by SEM. In order to obtained CTOD, we measured a crack size in wing frame part. As a result of fatigue experiment that accumulating plenty of fatigue loadings, we find more cracks than that produces in the same fatigue loading. The important loads relating to crack-growth was found in the largest strain cycle. Applying strain block in fatigue experiment, it is actually loading in connection of aircraft. In conclusion, These results can be used for preventing an accident owing fatigue-fracture in aircraft.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.1-6
• /
• 2010

Ball bearings are one of main components that support the rotational shaft in high speed rotary machinery. So, it is very important to detect the incipient faults and fault growth of bearing since the damage and failure of bearing can cause a critical failures or accidents of machinery system. In the past, many researchers mainly performed to detect the bearing fault using traditional method such as wavelet, statistics, envelope etc in vibration signals. But study on the detection technique for bearing fault growth has a little been performed. In this paper, we verified the possibility for monitoring of fault growth and detection of fault size in bearing outer-race by using the envelope powerspectrum and probabilistic density function from measured vibration signals.