• 한국표면공학회지
• /
• 제32권2호
• /
• pp.134-143
• /
• 1999

The effects of silicon on galvannealing behavior of interstitial-free (IF) steels were studied. The growth rate of the Fe-Zn alloy layer was retarded as silicon in the steel added. Titanium in steel strongly favors Fe-Zn reaction, in particular outburst structures, whereas silicon inhibit them. Cross-sectional and planar views of galvannealed coatings were investigated to characterize alloy phase development. A possible mechanism to explain the retardation effect of silicon is discussed in terms of concentration on surface and inhibition layer.

• 한국안전학회지
• /
• 제8권1호
• /
• pp.59-63
• /
• 1993

It is very difficult to find not only optimized welding condition but also fatigue characteristics of the dissimilar weld. In this study. Low carbon steel (SS41) and austenitic stainless steel (STS304) were welded by GTAW welding with STS309 stainless wire rod and Single Edge Notch specimens were used for the examination of fatigue behavior on welding heat cycle. The fatigue crack growth rate in HAZ of SS41 was the highest. The second was in STS304 bond line and the lowest was in HAS of STS304.

• 한국안전학회지
• /
• 제11권2호
• /
• pp.9-15
• /
• 1996

The characteristics on the extension of the CED(Crack energy density) concept to the interface kinked crack problems in a dissimilar material are examined. Each mode contributions of CED are found by symmetric and antisymmetric components and domain independent integrals. Finite element calculation is carried out to simulate the Interface kinked crack growth on bimaterial. The focus is the establishment of fracture criterion with CED and finding the orientation of crack extension. From the results, a prediction about the extension behavior of an interface kinked crack can be done. And we show that CED can be a parameter to indicate fracture criterion at an Interface kinked crack.

• Kyungpook Mathematical Journal
• /
• 제60권1호
• /
• pp.145-161
• /
• 2020

In this article, we study the solvability of the Cauchy-Dirichlet problem for a class of nonlinear parabolic equations with nonstandard growth and nonlocal terms. We prove the existence of weak solutions of the considered problem under more general conditions. In addition, we investigate the behavior of the solution when the problem is homogeneous.

• 한국지진공학회논문집
• /
• 제21권3호
• /
• pp.145-152
• /
• 2017

The objective of this study is to propose a simple and accurate analytical model for HSS braces. For this purpose, a physical theory model is adopted. Rectangular hollow section steel (HSS) braces are considered in this study. To accurately simulate the cyclic behavior of braces using the physical theory model, empirical equations calculating constituent parameters are implemented on the analytical model, which were proposed in the companion paper. The constituent parameters are cyclic brace growth, cyclic buckling load, and the incidence of local buckling and fracture. The analytical model proposed in this study was verified by comparing actual and simulated cyclic curves of brace specimens. It is observed that the proposed model accurately simulates the cyclic behavior of the braces throughout whole response range.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.214-219
• /
• 2004

Crack tip behavior of single mode loading condition(mode I)depend on tensile loading component but one of mixed mode loading condition(mode I+II) have influenced on shear loading component like the practical structure. Because crack closure is caused by shear loading component under mixed-mode loading a research on the behavior in the stage of crack initiation and propagation require to be evaluate about crack closure effect by fatigue crack surface friction. For that reasion we examined the behavior at the crack tip by direct measuring method. Measured behavior at the crack tip was analyzed through vector crack tip displacement. As a result, crack propafation equation was corrected by considering with crack closure effect. In addition we compared fatigue fracture crack surface and crack closure level.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.479-482
• /
• 2004

The behavior of fatigue delamination in a GLARE(Glass Fiber Reinforced Metal Laminates) under fatigue loading conditions investigated. The behavior of fatigue delamination was examined basing on investigation of the crack and delamination using a SAM (Scanning Acoustic Microscope). The crack and delamination behavior on the relationship among a-N, SAM images and crack length-delamination length were considered. The test results indicated the features of different fatigue delamination and crack growth according to each fiber orientation angle and also obtained to more increase delamination than crack through the relationship between crack length and delamination length in GLARE.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1989-1995
• /
• 2004

Finite element analysis(FEA) is the most popular numerical method to simulate plasticity-induced fatigue crack closure and can predict fatigue crack closure behavior. Finite element analysis under plane stress state using 4-node isoparametric elements is performed to investigate the detailed closure behavior of fatigue cracks and the numerical results are compared with experimental results. The mesh of constant size elements on the crack surface can not correctly predict the opening level for fatigue crack as shown in the previous works. The crack opening behavior for the size mesh with a linear change shows almost flat stress level after a crack tip has passed by the monotonic plastic zone. The prediction of crack opening level presents a good agreement with published experimental data regardless of stress ratios, which are using the mesh of the elements that are in proportion to the reversed plastic zone size considering the opening stress intensity factors. Numerical interpolation results of finite element analysis can precisely predict the crack opening level. This method shows a good agreement with the experimental data regardless of the stress ratios and kinds of materials.

• 복식
• /
• 제61권4호
• /
• pp.138-151
• /
• 2011

Due to its vast lands and rich underground resources, Mongolia is a country with high growth potential, even though it is currently in the early stage of economic development. In Mongolia, the Korean wave (Hallyu) has increased interests in Korea, especially in Korean fashion. This study analyzed lifestyles and examined the characteristics of clothing purchase behavior of Mongolian women in order to deepen the understanding of Mongolians' lifestyle and clothing purchase behavior and provide information for successful marketing strategies. The results based on 293 questionnaires showed that lifestyles consisted of six factors (socially active, beauty seeking, individualistic, simple comfort seeking, sensitive to others' perception, information focused) and four groups (socially oriented, individualistic, beauty seeking, and information seeking) were identified. Among the lifestyle groups, socially active group showed clear differences from other groups and there was no significant difference in demographic characteristics according to the lifestyle groups.

• Asia pacific journal of information systems
• /
• 제13권1호
• /
• pp.141-170
• /
• 2003

This study investigates internet shopping behavior of consumers. The rapid growth of the internet shopping markets is solely dependent on the voluntary adoption of internet shopping medium by the personal users. But the studies on this topic are very limited. Based on these facts, this study, recognizing the internet shopping medium as an innovation, studies how consumers understand and use innovative internet shopping medium by applying and extending the technology acceptance model proposed by Davis et. al.(1989). The results of the survey on 947 consumer panel reveal that compatibility, system quality have positive impact on the formation of perceived ease of use. And it is also shown that the perceived ease of use, system quality, and compatibility have positive influence on perceived usefulness, but computer-efficacy has no effect on perceived usefulness. Meanwhile, it is confirmed that perceived usefulness and compatibility have positive effect on attitude toward internet shopping behavior, but perceived ease of use has no effect. In addition, perceived security and social norm, as opposed to the hypotheses, are shown to have no effect on internet shopping behavior. Lastly, applications and related limitations are discussed.