• Journal of Microbiology and Biotechnology
• /
• v.24 no.2
• /
• pp.209-216
• /
• 2014

The efficiency of gamma irradiation (0, 1, 5, 10, 15, 20, and 30 kGy) as a sterilization method of corn samples (30 g) artificially contaminated with Fusarium moniliforme stored at normal condition ($25^{\circ}C$ with approximate relative humidity (RH) of 55%) and optimal condition ($25^{\circ}C$ with a controlled RH of 97%) was studied. The results showed that the fungal growth and the amount of fumonisin were decreased as the dose of gamma irradiation increased. Gamma irradiation at 1-5 kGy treatment significantly inhibited the growth of F. moniliforme by 1-2 log reduction on corn samples (P < 0.05). Sublethal effect of gamma irradiation was observed at 10-20 kGy doses after storage, and a complete inactivation required 30 kGy. Fungal growth and fumonisin production increased with higher humidity and longer storage time in all corn samples. This study also demonstrated that there was no strict correlation between fungal growth and fumonisin production. Storage at normal condition significantly resulted in lower growth and fumonisin production of F. moniliforme as compared with those stored at optimal condition (P < 0.05). Gamma irradiation with the dose of ${\geq}5$ kGy followed by storage at normal condition successfully prolonged the shelf life of irradiated corns, intended for human and animal consumptions, up to 7 weeks.

• Journal of applied mathematics & informatics
• /
• v.34 no.5_6
• /
• pp.421-434
• /
• 2016

The main aim of this paper is to discuss the difference between the Euler-Maruyama's approximate solutions and the accurate solution to stochastic differential delay equation. To make the theory more understandable, we impose the non-uniform Lipschitz condition and weakened linear growth condition. Furthermore, we give the pth moment continuous of the approximate solution for the delay equation.

• Journal of applied mathematics & informatics
• /
• v.31 no.3_4
• /
• pp.491-498
• /
• 2013

This note is concerned with the uniform $L^p$-continuity of solution for the stochastic differential equations under Lipschitz condition and linear growth condition. Furthermore, uniform $L^p$-continuity of the solution for the stochastic functional differential equation is given.

• Journal of applied mathematics & informatics
• /
• v.37 no.5_6
• /
• pp.491-506
• /
• 2019

In this paper, we show the existence and uniqueness of solution to stochastic differential equations under weakened $H{\ddot{o}}lder$ condition and a weakened linear growth condition. Furthermore, the properties of their solutions investigated and estimate for the error between Picard iterations $x_n(t)$ and the unique solution x(t) of SDEs.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.3
• /
• pp.53-63
• /
• 2014

This study was carried out to investigate the growth responses of medicinal plants such as Glehnia littoralis, Cryptotaenia japonica, Angelica gigas, Reynoutria japonica, Saururus chinensis, Houttuynia cordata, Ligularia fischeri, and Aralia cordata under 70%-shading and full sunlight conditions on a rooftop condition using artificial soil as a growth media. Glehnia littoralis, Cryptotaenia japonica, Ligularia fischeri, Saururus chinensis, and Houttuynia cordata showed better growth on plant height, leaf length, leaf width, petiole length and leaf number under full sunlight conditions on a rooftop condition. Cryptotaenia japonica and Houttuynia cordata had high value of Hunter's a (red-green) under full sunlight, while had lower value of L(lightness) and b(blue-yellow) than those of 70% shading condition. As an index of plant stress response, Glehnia littoralis, Reynoutria japonica, Houttuynia cordata, Ligularia fischeri showed Fv/Fm values 0.79~0.84 under full sunlight in August, indicating low stress on plant growth. Therefore they seemed to be suitable medicinal plats for rooftop conditions. Ligularia fischeri and Reynoutria japonica showed better growth under 70% shading treatment in August, while showed high growth response under full sunlight conditions in September. The 70% shading treatment was effective for the growth of Angelica gigas, Reynoutria japonica, and Aralia cordata. Angelica gigas and Reynoutria japonica, however, showed better plant growth under full sunlight during summer. The results showed that Glehnia littoralis, Cryptotaenia japonica, Ligularia fischeri, Saururus chinensis, and Houttuynia cordat seemed to be suitable medicinal plants for rooftop garden where there is a full sunlight condition.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.221-225
• /
• 1996

In diamond synthesis by metal film growth method under high pressure and high temperature, the nucleation and growth of diamond was observed dependent on the carbon source variation from graphite powder to the heat treated powders of lamp black carbon. At the low driving force condition near equilibrium pressure and temperature line, nucleation of diamond did not occur but growth of seed diamond appeared in the synthesis from lamp black carbon while both nucleation and growth of diamond took place in the synthesis from graphite. Growth morphology change of diamond occurred from cubo-octahedron to octahedron in the synthesis from graphite but very irregular growth of seed diamond occurred in the synthesis from lamp block carbon. Lamp black carbon transformed to recrystallized graphite first and very nucleation of diamond was observed on the recrystallized graphite surface. Growth morphology of diamond on the recrystallized graphite was clear cubo-octahedron even at higher pressure departure condition from equilibrium pressure and temperature line.

• ALGAE
• /
• v.26 no.1
• /
• pp.73-77
• /
• 2011

A dominant planktonic bloom-forming species, Mallomonas elongata was isolated from a small shallow eutrophic pond. The growth characteristics of this species on variable silicate concentrations and light intensities were investigated in laboratory unialgal cultures. In culture condition of $15^{\circ}C$, the maximum population growth and the highest growth rate of M. elongata occurred at a light intensity of $80\;{\mu}mol\;m^{-2}s^{-1}$, and in culture condition of $18^{\circ}C$, it exhibited the maximum population growth and the highest growth rates at a light intensity of $50\;{\mu}mol\;m^{-2}s^{-1}$. Silicate concentration had no effect on the population growth and growth rate of M. elongata.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.1
• /
• pp.122-131
• /
• 1999

Indoor environments are usually less than optimal for the growth of ferns, especially in regards to the water condition. These studies were performed to investigate responses involved in causing growth of ferns and presume management plan against the water deficit under indoor conditions. The effect of air humidity and soil moisture on the ferns was examined in Adiantume raddianum and Selaginella kraussiana. Results of experiments are as follows; 1. Under a low humidity condition, having a 25-50% RH. ornamental value of ferns decreased much more than under a 90% RH. Under a low soil moisture, such as sand treatment, ornamental value of ferns also decreased. 2. Leaf chlorophyll content, water content and stomata situations increased as air humidity and soil moisture went up. 3. Even if air humidity and soil water were not enough for ferns growth, the extending of irrigation cycle was helpful. 4. Under extremely low air humidity conditions, some water management, namely, using water holding soil or extending of irrigation cycle was desirable. Other methods of increasing air humidity, including water instruments such as ornamental pools, waterfalls, or fountains, grouping plants together were also helpful. But spraying water on leaves increased injury to ferns growth because of excess evaporation from the leaves. Though these studies, we learn that ferns are susceptible to water condition such as air humidity, soil water and water management. If other environmental factos are maintained with optimal conditions, water condition plays an important role in ferns growth in indoor environments.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.5
• /
• pp.93-99
• /
• 2010

Nucleate pool boiling experiments with constant heat flux condition were performed using pure R113 for various channel heights under saturated pool condition. A circular heater of 1mm diameter, with artificial cavity in the center, fabricated using MEMS technique and the high-speed controller were used to maintain the constant heat flux. Images of bubble growth were taken at 5,000 frames per second using a high-speed CCD camera. The bubble geometry was obtained from the captured bubble images. The effects of channel height on the bubble growth behaviors were analyzed as dimensional scales for the initial and thermal growth regions. The parameters for the bubble growth behaviors were bubble radius, bubble growth rate, and bubble shapes. These phenomena require further analysis for various surface angles, but this study will provide good experimental data with constant heat flux boundary condition for such works.

• Nuclear Engineering and Technology
• /
• v.33 no.5
• /
• pp.526-538
• /
• 2001

Fatigue tests in air and in room temperature water were performed to obtain comparable data and stable crack measuring conditions. In air environment, fatigue crack growth rate was increased with increasing temperature due to an increase in crack tip oxidation rate. In room temperature water, the fatigue crack growth rate was faster than in air and crack path varied on loading conditions. In simulated light water reactor (LWR) conditions, there was little environmental effect on the fatigue crack growth rate (FCGR) at low dissolved oxygen or at high loading frequency conditions. While the FCGR was enhanced at high oxygen condition, and the enhancement of crack growth rate increased as loading frequency decreased to a critical value. In fractography, environmentally assisted cracks, such as semi-cleavage and secondary intergranular crack, were found near sulfide inclusions only at high dissolved oxygen and low loading frequency condition. The high crack growth rate was related to environmentally assisted crack. These results indicated that environmentally assisted crack could be formed by the Electrochemical effect in specific loading condition.