• 제목/요약/키워드: growing bed

검색결과 143건 처리시간 0.032초

황산암모늄 주입시 CFBC 보일러의 오염물질 특성 연구 (A Study on the Characteristics of Pollutants in CFBC Boiler with Ammonium Sulfate Injection)

  • 이창열;정복화;정진도
    • 한국폐기물자원순환학회지
    • /
    • 제35권8호
    • /
    • pp.754-761
    • /
    • 2018
  • There is growing concern over the effects of global warning. In response, the power generation sector must consider a wider range of systems and fuels to generate power. One of the classes of solid fuels that is being increasingly developed is biomass. However, one of the most serious problems that biomass plants face is severe corrosion. To mitigate the problem, various approaches have been proposed in terms of additive utilization. This study is based on the results obtained during the co-combustion of wood chip and waste wood in a circulating fluidized bed boiler (CFBC boiler). The KCl concentration was reduced from 59.9 ppm to 3.9 ppm during the injection of ammonium sulfate, and NOx was reduced by 25.5 ppm from 30.6 ppm to 5.1 ppm. However, SOx increased by 110.2 ppm from 33.2 ppm to 143.4 ppm, and HCl increased by 71.5 ppm from 340.5 ppm to 412.0 ppm. Thus, we confirmed that the attitude of the superheater tube was reduced by 87 ~ 93%, and the injection of ammonium sulfate was effective in preventing high-temperature corrosion.

Estimating the lateral profile of helical piles using modified p-y springs

  • Hyeong-Joo Kim;Hyeong-Soo Kim;Peter Rey Dinoy;James Vincent Reyes;Yeong-Seong Jeong;Jun-Yong Park;Kevin Bagas Arifki Mawuntu
    • Geomechanics and Engineering
    • /
    • 제35권1호
    • /
    • pp.1-11
    • /
    • 2023
  • A growing trend of utilizing helical piles for soft soil strata to support infrastructure projects is currently observed in Saemangeum, South Korea. Recognized mainly due to its ease of installation and reusability proves to be far more superior compared to other foundation types in terms of sustainability. This study applies modified p-y springs to characterize the behavior of a laterally loaded helical pile with a shaft diameter of 89.1 mm affixed with 3 helices evenly spaced along its embedded length of 2.5 m. Geotechnical soil properties are correlated from CPT data near the test bed vicinity and strain gauges mounted on the shaft surface. A modification factor is applied on the p-y springs to adjust the simulated data and match it to the bending moment, soil resistance and deflection values from the strain gauge measurements. The predicted lateral behavior of the helical pile through the numerical analysis method shows fairly good agreement to the recorded field test results.

Performance evaluation of nitrate removal in high TDS wet scrubber wastewater by ion exchange resin with dissolved air flotation (DAF) process

  • Kim, Bongchul;Yeo, Inseol;Park, Chan-gyu
    • Membrane and Water Treatment
    • /
    • 제13권1호
    • /
    • pp.1-6
    • /
    • 2022
  • The regulations of the International Maritime Organization (IMO) have been steadily strengthened in ship emissions. Accordingly, there is a growing need for development of related technologies for the removal of contaminants that may occur during the treatment of SOx and NOx using a wet scrubber. However, this system also leads to wastewater production when the exhaust gas is scrubbed. In this research, we evaluated the performance of an ion selective resin process in accordance with scrubber wastewater discharge regulations, specifically nitrate discharge, by the IMO. Accelerated real and synthetic wastewater of wet scrubbers, contained high amounts of TDS with high nitrate, is used as feed water in lab scale systems. Furthermore, a pilot scale dissolved air flotation (DAF) using microbubble generator with ion exchange resin process was combined and developed in order to apply for the treatment of wet scrubber wastewater. The results of the present study revealed that operating conditions, such as resin property, bed volume (BV), and inlet wastewater flow rate, significantly affect the removal performance. Finally, through a pilot test, DAF with ion exchange resin process showed a noticeable improvement of the nitrate removal rate compared to the single DAF process.

스마트팜 모니터링 시스템 개발 (Development of Smart Farm Monitoring System)

  • 김관형
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2021년도 춘계학술대회
    • /
    • pp.287-288
    • /
    • 2021
  • 전 세계적으로 식물공장에 대한 관심이 높아지고 있으며, 최근에는 도시환경에서도 작물을 재배할 수 있는 자동화된 관리시스템에 대한 연구가 진행되고 있다. 이러한 관리시스템의 발전은 ICT(Information Communications Technology) 기술의 발전으로 기반으로 하고 있으며, 식물의 생산성을 높이기 위하여 시설, 광원, 온도, 습도 및 자동화를 중심으로 연구되고 있으며, 재배 과정의 자동화에 대한 운영 표준화에 대한 연구가 진행되고 있다. 본 논문에서는 컨테이너 환경에서 수경인삼을 재배할 수 있는 테스트 배드를 구축하여 생육과정에 대한 환경을 모바일에서 모니터링하고 관리할 수 있는 모델을 제시하고자 한다.

  • PDF

큰느타리버섯 재배사의 실태분석 - 서부경남지역을 중심으로 - (Analysis of Actual State of Facilities for Pleurotus eryngii Cultivation - Based on Western Gyeongnam Area -)

  • 윤용철;서원명;유찬
    • 생물환경조절학회지
    • /
    • 제13권4호
    • /
    • pp.217-225
    • /
    • 2004
  • 본 조사는 최근 급격히 증가하고 있는 새송이버섯 재배농가의 안정적 영농을 위해 재배사 설계, 시공 및 환경조절과 관련한 기초 자료를 마련하기 위해 서부 경남지역을 대상으로 새송이버섯 재배사의 재배사 규모, 환경조절시스템 등의 실태조사 및 검토를 하였다. 재배사의 형태는 반영구재배사와 영구재배사로 대별 할수 있었고, 반영구재배사는 대부분 단동이었고, 영구재배사의 경우는 단동에 비해 상대적으로 연동이 많았다. 그리고 재배사의 규모는 형태에 관계없이 다양하였지만, 길이, 폭 및 동고는 각각 20m, $6.6\~7.0m$$4.6\~5.0m$정도의 농가가 가장 많았으며, 동당 바닥면적은 $132\~140m^2$(40-42평)정도의 범위로서 대부분 콘크리트로 처리하여 각종 균에 의한 버섯의 오염을 방지 할 수 있도록 되어 있었다. 반영구 및 영구재배사의 지붕경사각은 각각 $41.5^{\circ}$$18.6\~28.6^{\circ}$로 나타나 반영구재배사의 지붕경사도가 더 큰 것으로 나타났다. 그리고 재배상의 폭 및 단수는 재배사의 형태에 관계없이 각각 $1.2\~1.6m$정도와 4단이 주류를 이루고 있었다. 버섯을 연중재배 하는 재배사에는 모두 냉${\cdot}$난방시설, 가습장치 및 환기팬이 설치되어 있었다. 난방방식의 경우, 온수보일러, 전기히터, 증기보일러 순으로 나타났다. 냉방장치의 경우는 모두 산업용 에어컨을 설치하여 운용하고 있었다. 그리고 가습은 초음파가습기와 원심분리가습기를 사용하고 있었으며, 보조 장치로 분무노즐을 사용하는 농가도 일부 있었다. 또한 온${\cdot}$습도 조절 및 탄산가스 조절을 위한 장치의 제어는 동별 제어시스템을 많이 채택하고 있었다. 그리고 온도센서 이외는 모두 타이머를 이용하고 있음을 알 수 있었다. 배지병의 크기는 850 cc 및 1,100 cc를 사용하는 농가가 주류를 이루고 있었고, 이 밖에도 800cc와 950 cc, 1,200 cc병을 사용하는 농가도 있었다. 출하형태는 대부분 유통회사와 공판장을 동시에 이용하고 있었다.

한국산 양식김의 종류 (SPECIES OF CULTIVATED PORPHYRA IN KOREA)

  • 강제원
    • 한국수산과학회지
    • /
    • 제3권2호
    • /
    • pp.77-92
    • /
    • 1970
  • Ueda, in the course of his systematic work on the lavers, Porphyra, in Japan and Korea in 1932, mentioned that most of the cultivated Porphyra belong to Porphyra tenera Kjellman. Then he, dividing the species into two forms, f. typica and f. kjellmani, put Korean cultivated Porphyra under the latter. From the 1930s to the early 1940s, Fujikawa, Kaneko and others worked on Physiological experiments or cultivational experiments of Porphyra in the culture-bed, but there was no mention about the cultivated Porphyra species. However, many fishermen generally recognize that the characteristics of cultivated Porphyra vary depending on their habitat or the picking season, and it is considered that these differences are due to the varieties of the species which are well adaptable to various environments. Recently, I have become aware of the predominant occurrence of P. yezoensis Ueda in most culture-beds of Korea as in the Tokyo Bay or other places in Japan. At present, since artificial seeding for the cultivation of Porphyra with Conchocelis has been carried out and peculiar species can be cultured, a study of the species of cultivated Porphyra has become an important subject. I collected the specimens from a number of culture-beds which are located in the legions shown in fig. 1 from January, 1968 to May, 1970 and found that there are five species, P. tenera Kjellman, P. yezoensis Ueda, P. kuniedai Kurogi, P. seriata Kjellman and P. suborbiculata Kjellman. Among them, P. kuniedai was treated as a round-type, a form of P. tenera, by Kunieda (1939) and Tanaka (1952) and the occurrence of this form is generally recognized by most fishermen. At present, as mentioned above, the most dominant species of cultivated Porphyra is P. yezoensis but the cultivation of P. tenera is restricted to certain culture-beds or the early half of the cultivation period. P. kunieda appears as a mixed species throughout most of the culture-beds, particulary in the later half of the period, while when it was picked in January it appeared dominantly in a place such as Gum-Dang where the 'Bal', splitted bamboo piece mat, was settled during the last of September. This is the first seeding process. The latter two species, P. suborbiculata and P. seriata appear frequently but in small amounts in the later half of the period particulary in the western region of the southern coast. However, it can not be ascertained when P. yezoensis becomes predominant, because specimens have not been available up until recent years but the process can be described as follows: We commonly recognize the ecological characteristics of P. tenera as follows; First, the conchospores of the species develop earlier and the period of its discharge is shorter than those of P. yezoensis; second, the microscopical buds discharge neutral spores which develop into new buds directly and buds develop repeatedly through a short period. Consequently, according to such above ecological characteristics, the species can grow thick on the 'Bal' exclusively. However, buds may disappear when they are harmed by disease such a 'infection by certain parasites or by other unusual environmental conditions. Thus P. yezoensis are enabled to grow on the 'Bal' instead of the former species since they not only develop later than the former but also macroscopical fronds discharge the neutral spore throughout the period from October to May. Likewise, if any disease appears in the culture-bed ill the later half of the period, the former is more severely damaged than the latter because the former have less resistance to the disease than the latter. Thus fewer frond survive and fewer carpospores which are the origin of the next generation can be discharged. However the latter by their nature can continue growing until early summer. In the case of the culture-bed where the above phenomenon occurs repeatedly P. yezoensis gradually may become the dominant species among cultivated Porphyra. In support of the validity of this process we find that according to the description and the plate of Wada (1941), P. tenera, P. yezoensis and P. kuniedai grow together in the culture-bed at the mouth of the Nakdong River where P. yezoensis occurs predominantly and mixed with P. kuniedai.

  • PDF

효모 고정화용 세라믹 담체의 개발 (Development of Ceramic Media for Yeast Immobilization)

  • 이율락;박상재
    • KSBB Journal
    • /
    • 제15권3호
    • /
    • pp.285-292
    • /
    • 2000
  • 난초를 키우는 화분에 보습용으로 사용되는 다공성 화산석을 2-3 mm크기로 파쇄한 후 $600^{\circ}C$에서 1시간 태워서 가연성 물질 을 제거하고 IN의 염산용액으로$60-70^{\circ}C$에서 2시간 이물질을 녹여댄 후 세척할 경우 효모 고정화에 적당한 담체를 얻을 수 있었다 이 때 염산 용액 대신 NaOH 용액을 세척용액으로 사용 할 수 있으나 담체 구성성분의 용출이 있을 수 있으므로 용액 농도, 처리온도 및 시간에 주의하여야 한다 이렇게 제조된 담체 는 기공의 크기가 $15-80\mu\textrm{m}$이고 충전 밀도는 0.4-0.6 g/mL 였으며 $SiO_2$가 주성분이었고, $Al_2O_3$가 소량함유되어 있었으며, CaO, MgO가 미량 함유되어 있었다. 이 담제의 구조와 효모 고 정화 능력을 국내외 기업에서 제조한 실리카 및 알루미나 재질 의 담체의 경우와 비교한 결과 고상포말법으로 제조한 실리가 담체의 구조 및 고정화능력($5{\times108}$ cells/mL bed)과 비슷한 결 과를 보여 효모 고정화용 담체로 손색이 없었다.. Cordierite 담체 와 알루미나 담체는 고정화능이 실리카 담체의 50% 이하로 낮 았는데 이는 기공의 표면이 매끄럽지 못했기 때문으로 효모가 쉽게 흡착하기 위해서는 가능한 한 매끄러운 표면이 바람직하다 는 사실을 알 수 있었다.

  • PDF

모래밭버섯 균근균(菌根菌)의 인공접종(人工接種)에 의(依)한 포플러 삽목묘(揷木苗)의 생장촉진(生長促進) 및 활착률(活着率) 증진(増進) (Enhancement of Growth and Survival of Populus alba × P. glandulosa Cuttings Inoculated with Ectomycorrhizal Fungus, Pisolithus tinctorius under Fumigated Nursery Condition)

  • 이경준;구창덕
    • 한국산림과학회지
    • /
    • 제70권1호
    • /
    • pp.72-76
    • /
    • 1985
  • 외생균근(外生菌根)을 형성(形成)하는 모래밭 버섯균(菌)(Pisolithus tinctorius) (Pt)을 포플러에 인공접종(人工接種)하여 기주(寄主)의 생장촉진(生長促進)과 활착률(活着率) 증진효과(增進效果)를 조사(調査)하였다. 질석(蛭石), 니탄(泥炭)이끼, MMN배지(培地)(Modified Melin-Norkrans)를 첨가(添加)한 $1{\ell}$ 유리 용기(容器)에 Pt 균(菌)을 대량(大量)으로 배양(培養)하여 Methyl bromide($50g/m^2$)로, 훈증(熏蒸)한 묘포토양(苗圃土壤)에 혼합(混合)하고, 은수원사시 (Populus alba${\times}$P. glandulosa)를 삽목(揷木)하였다. $1{\times}2m$ 크기의 삽목상(揷木床)에 50개(個)의 삽수(揷穗)를 사용(使用)했으며, 삽목당년(揷木當年) 가을에 수고(樹高), 건중량(乾重量)(지상부(地上部)), 활착률(活着率)을 조사(調査)하였다. Pt로 접종(接種)된 묘목(苗木)은 접종(接種)안된 묘목(苗木)보다 수고생장(樹高生長)에서 19% 더 빨리 자랐으며, 지상부(地上部)의 건중량(乾重量)에서 49% 더 많았다. 삽목(揷木) 활착률(活着率)도 접종(接種)된 묘목(苗木)이 접종(接種)안된 묘목(苗木)보다 20% 증가(增加)하였다. 접종(接種)된 묘목(苗木)에는 Pt 균(菌)의 전형적(典型的)인 황갈색(黃擖色)을 띤 세근(細根)이 많이 발달(發達)했으며, 꼬불꼬불한 root tip 형태(形態)를 보였다. 접종(接種)된 삽목상(揷木床)에서 9월(月) 중순(中旬)에 Pt균(菌)의 자실체(子實體)가 생산(生産)되어서, 접종(接種)과 균근형성(菌根形成)이 성공적(成功的)이었음을 입증(立證)해 주었다.

  • PDF

기후변화에 따른 농업용수공급패턴의 변화로 인한 이수안전도변화분석 (Water Supply Reliability Revaluation For Agricultural Water Supply Pattern Changes Considering Climate Changes)

  • 최영돈;안종서;신현석;차형선
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2010년도 학술발표회
    • /
    • pp.273-277
    • /
    • 2010
  • This research was performed to examine changes in the timing of the growth of crops along with changes in temperatures due tochanges and to analyze the change of water-supply-reliability by adding an analysis of the change of agricultural water supply patterns in the basin area of Miryang dam in Korea. Had-CM3 model from U.K. was the tool adopted for the GCM model, a stochastic, daily-meteorology-generation-model called LARS-WG was alsoused for downscaling and for the climate change scenario (A1B) which represents Korea's circumstances best. First of all, to calculate changes in the timing of the growth of crops during this period, the theory of GDD was applied. Except for the period of transplanting and irrigation, there was no choice but to find the proper accumulated temperature by comparing actual temperature data and the supply pattern of agricultural use due to limited temperature data. As a result, proper temperatures were found for each period. $400^{\circ}C$ for the preparation period of a nursery bed, $704^{\circ}C$ for a nursery bed's period, $1,295^{\circ}C$ for the rice-transplanting period, $1,744^{\circ}C$ for starting irrigation, and $3,972^{\circ}C$ for finishing irrigation. To analyze future agricultural supply patter changes, the A1B scenario of Had-CM3 model was adopted, and then Downscaling was conducted adopting LARS-WG. To conduct a stochastical analysis of LARS-WG, climate scenarios were generated for the periods 2011~2030, 2046~2065, 2080~2099 using the data of precipitation andMax/Min temperatures collected from the Miryang gauging station. Upon reviewing the result of the analysis of accumulated temperatures from 2011~2030, the supply of agricultural water was 10 days earlier, and in the next periods-2046~2065, 2080~2099 it also was 10 days earlier. With these results, it is assumed that the supply of agricultural water should be about 1 month ahead of the existing schedule to meet the proper growth conditions of crops. From the results of the agricultural water supply patterns should be altered, but the reliability of water supply becomes more favorable, which is caused from the high precipitation change. Furthermore, since the unique characteristics of precipitation in Korea, which has high precipitation in the summer, water-supply-reliability has a pattern that the precipitation in September could significantly affect the chances of drought the following winter and spring. It could be more risky to make changes to the constant supply pattern under these conditions due to the high uncertainty of future precipitation. Although, several researches have been conducted concerning climate changes, in the field of water-industry, those researches have been solely dependent on precipitation. Even so, with the high uncertainty of precipitation, it is difficult for it to be reflected in government policy. Therefore, research in the field of water-supply-patterns or evapotranspiration according to the temperature or other diverse effects, which has higher reliability on anticipation, could obtain more reliable results in the future and that could result in water-resource maintenance to be safer and a more advantageous environment.

  • PDF

무인수상정 플랫폼 장비의 통합 제어 시스템 개발 (A Development of Integrated Control System for Platform Equipments of Unmanned Surface Vehicle (USV))

  • 황훈규;김현우;김배성;우윤태;신일식;신지환;이영진;최병웅
    • 한국정보통신학회논문지
    • /
    • 제21권8호
    • /
    • pp.1611-1618
    • /
    • 2017
  • 최근 해양 환경에서 국방과 관련한 임무를 수행하는 무인수상정(USV, unmaned surface vehicle)의 개발이 활발히 이루어지고 있다. 무인수상정이 해양 환경에서 성공적인 임무를 수행하기 위해서는 선체부, 추진시스템, 조향시스템, 제어시스템, 전원시스템 등을 포함하는 원격/자율 무인수상정 플랫폼이 필수적으로 요구된다. 기존 무인수상정은 기계식 제어 방식을 채택하고 있었지만, 이는 중량 등 여러가지 측면에서의 제약을 가진다. 이러한 문제점을 보완하기 위하여 본 논문에서는 무인수상정의 플랫폼 장비를 전자적으로 제어하기 위한 시스템을 개발하고, 개발한 시스템을 실험하여 유용성을 검증하는 것에 관한 내용을 다룬다. 이를 위해서 제어 명령에 따라 엔진, 워터젯, 전원 등 플랫폼 장비를 제어하기 위한 주 제어 시스템과 엔진 제어장치, 워터젯 제어장치, 전원 제어장치에 관한 시스템 아키텍처를 설계하고, 각 구성 요소를 개발한다. 또한, 개발한 시스템의 수조 실험 및 검증을 위하여 엔진 및 워터젯의 각 구성 요소를 포함하는 테스트베드를 설계 및 제작하였고, 이를 기반으로 실험을 수행하여 개발한 시스템의 유용성을 검증하였다.