• 한국통신학회논문지
• /
• 제27권8B호
• /
• pp.809-818
• /
• 2002

본 논문에서는 3GPP 표준인 WCDMA 시스템에 호환성을 유지하면서 적용될 수 있는 새로운 셀 탐색 알고리즘을 제안한다. 기존 WCDMA 시스템에서는 2개의 동기 채널(P-SCH 및 S-SCH)을 이용하여 셀 탐색을 수행하는데 반해 제안하는 셀 탐색 알고리즘은 하나의 동기 채널만을 이용하여 슬롯 동기와 프레임 동기 그리고 코드 그룹 아이디를 획득할 수 있다. 이를 위하여 제안하는 알고리즘에서는 기존 WCDMA의 P-SCH에 극성 코드를 이용한 극성 변조를 수행함으로써 스크램블링 코드의 그룹핑 정보를 전송한다. 제안하는 셀 탐색 알고리즘은 기존 WCDMA 셀 탐색 알고리즘에 비해 하나의 동기 채널만을 이용하기 때문에 기지국에서 송신 신호의 이득을 얻을 수 있으며 동시에 수신기의 복잡도를 줄일 수 있는 특징을 갖는다. 제안하는 알고리즘은 특히 SNR 좋지 못한 채널 환경에서 기존 셀 탐색 알고리즘에 비하여 셀 탐색 시간면에서 우수한 성능을 보임을 시뮬레이션을 통하여 검증하였다.

• 전기화학회지
• /
• 제3권3호
• /
• pp.162-168
• /
• 2000

전기주석도금용 PSA(Phenolsulfonic Acid Bath)계 전기주석 도금액은 장기간 사용하면 노화되어 도금 전류밀도 범위 축소 및 표면특성 열화현상이 일어나게 된다. 본 연구에서는 도금액 노화 현상의 원인을 축적된 phenolsulfonate농도 증가의 관점에서 조사하였다. 동전위와 정전위 분극실험 결과에서는, phenolsulfonate축적농도 증가에 따른 도금액의 노화 정도가 증가함에 따라 음극분극 초기에 나타나는 한계전류밀도가 점차 낮아지는 현상이 나타났다. Sodium phenolsulfonate를 첨가하여 phenolsulfonate끼 농도만을 조절한 도금액에서도 노화된 도금액과 거의 비슷한 분극 특성이 나타남으로써 도금액 노화의 원인이 축적된 phenolsulfonate임을 간접적으로 확인할 수 있었다. 또한 도금액의 온도가 증가할수록 한계전류밀도가 뚜렷하게 나타나지 않고 도금액 노화에 따른 영향이 적어져서 도금액의 노화는 물질이동과 같은 thermally-activated process의 제약에 의한 것이며, phenolsulfonate가 축적되면서 주석 이온의 mobility를 감소시키고, 따라서 정상적인 도금 반응이 억제되는 것으로 판단된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1163-1166
• /
• 2004

Cinnamate group is well-known for the dimerization reaction by ultra-violet irradiation and cinnamate polymers are studied for photo-alignment materials. The cinnamate groups of flexible polymer are found to produce LC alignment parallel to polarization direction of ultra-violet light, which is contrary to the LC orientation on conventional cinnamate polymers. The un-reacted cinnamate groups in the flexible polymer are also found to participate in cycloadducts formation by additional thermal reaction that preserves the orientation of cycloadducts, leading to the enhancement of thermal stability of LC alignment.

• Corrosion Science and Technology
• /
• 제9권5호
• /
• pp.209-215
• /
• 2010

To elucidate the effect of aging time on resistance to localized corrosion of hyper duplex stainless steel, a double-loop electrochemical potentiokinetic reactivation test a potentiodynamic anodic polarization test, a scanning electron microscope-energy dispersive spectroscope analysis, and a thermodynamic calculation were conducted. With an increase in aging time, sigma phases are precipitated much more than chi phases due to the meta-stable chi phase acting as a transition phase. As aging time at $850^{\circ}C$ increases, the corrosion resistance decreases owing to an increase in Cr, Mo and W depleted areas adjacent to the intermetallic phases such as sigma phases and chi phases.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1345-1351
• /
• 2018

To allow stable cycling of layered nickel-rich cathode material at high voltage, silyl-functionalized dimethoxydimethylsilane is proposed as a multi-functional additive. In contrast to typical functional additive, dimethoxydimethylsilane does not make artificial cathode-electrolyte interfaces by electrochemical oxidation because it is quite stable under anodic polarization. We find that dimethoxydimethylsilane mainly focuses on scavenging nucleophilic fluoride species that can be produced by electrolyte decomposition during cycling, leading to improving interfacial stability of both nickel-rich cathode and graphite anode. As a result, the cell cycled with dimethoxydimethylsilane-controlled electrolyte exhibits 65.7% of retention after 100 cycle, which is identified by systematic spectroscopic analyses for the cycled cell.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.573-576
• /
• 2005

A compact linear and angular displacement measurement device was developed by combining a Michelson interferometer and an autocollimator to characterize the movement of a precision stage. A Michelson interferometer and an autocollimator are typical devices for measuring linear and angular displacement, respectively. By controlling the polarization of reflected beam from the target mirror of the interferometer, some part of light was retro-reflected to the light source and the reflected beam was used for angle measurement. The interferometer and the autocollimator use the same optic axis and the target mirror can be easily and precisely aligned orthogonal to the optic axis by monitoring the autocollimator s signal. The autocollimator was designed for angular resolution of 0.1 arcsec and dynamic range of 60 arcsec. The nonlinearity error of interferometer was minimized by trimming the gain and offset of the photodiode signals. Through the experiments, we evaluate the performance of measurement device and discuss its applications.

• 대한치과보철학회지
• /
• 제33권3호
• /
• pp.584-609
• /
• 1995

The purpose of this study was to evaluate the difference of the galvanic corrosion behaviour of the titanium in contact with gold alloy, silva-palladium alloy, and nickel-chromium alloy using the immersion and electrochemical method. And the effects of galvallit couples between titanium and the dental alloys were assessed for their usefulness as materials for superstructure. The immersion method was performed by measuring the amount of metal elementsreleased by Inductivey coupled plasma emission spectroscopy(ICPES) The specimen of fifteen titanium plates, the five gold alloy, five silver-palladium, five nickel-chromium plates, and twenty acrylic resin plates ware fabricated, and also the specimen of sixty titanium plugs, the thirty gold alloy, thirty silver-palladium, and nickelc-hromium plugs were made. Thereafter, each plug of gold alloy, silver-palladium, and nickel-chromium inserted into the the titanium and acrylic resin plate, and also titanium plug inserted into the acrylic resin plate. The combination specimens uf galvanic couples immersed in 70m1 artificial saliva solution, and also specimens of four type alloy(that is, titanium, gold, silver-palladium and nickel-chromium alloy) plugs were immersed solely in 70m1 artificial sativa solution. The amount of metal elements released was observed during 21 weeks in the interval of each seven week. The electrochemical method was performed using computer-controlled potentiosta(Autostat 251. Sycopel Sicentific Ltd., U.K). The wax patterns(diameter 11.0mm, thickness,in 1.5mm) of four dental casting alloys were casted by centrifugal method and embedded in self-curing acrylic resin to be about $1.0cm^2$ of exposed surface area. Embedded specimens were polished with silicone carbide paper to #2,000, and ultrasonically cleaned. The working electrode is the specimen of four dental casting alloys, the reference electrode is a saturated calmel electrode(SCE) and the ounter electrode is made of platinum plate. In the artificial saliva solution, the potential scanning was carried out starting from-700mV(SCE) TO +1,000mV(SCE) and the scan rate was 75mV/min. Each polarization curve of alloy was recorded automatically on a logrithmic graphic paper by XY recorder. From the polarization curves of each galvanic couple, corrosion potential and corrosion rates, that is, corrosion density were compared and order of corrosion tendency was determined. From the experiments, the following results were obtained : 1. In the case of immersing titanium, gold alloy, silver-palladium alloy, and nickel-chromium alloysolely in the artificial saliva solution(group 1, 2, 3, and 4), the total amount of metal elements released was that group 4 was greater about 2, 3 times than group 3, and about 7.8 times than group 2. In the case of group 1, the amount of titanium released was not found after 8 week(p<0.001). 2. In the case of galvanic couples of titanium in contact with alloy(group 5, 6), the total amount of metal elements released of group 5 and 6 was less than that of group 7, 8, 9, and 10(p<0.05). 3. In the case of galvanic couples of titanium in contact with silver-palladium alloy(group 7, 8), the total amount of metal elements released of group 7 was greater about twice than that of group 5, and that of group 8 was about 14 times than that of group 6(p<0.05). 4. In the case of galvanic couples of titanium in contact with nickel-chromium alloy(group 9, 10), the total amount of metal elements released of group 9 and 10 was greater about 1.8-3.2 times than that of group 7 and 8, and was greater about 4.3~25 times than that of group 5 and 6(p<0.05). 5. In the effect of galvanic corrosion according to the difference of the area ratio of cathode and anode, the total amount of metal elements released was that group 5 was greater about 4 times than group 6, group 8 was greater about twice than group 7, and group 10 was greater about 1.5 times than group 9(p<0.05). 6. In the effect of galvanic corrosion according to the elasped time during 21 week in the interval of each 7 week, the amount of metal elements released was decreased markedly in the case of galvanic couples of the titanium in contact with gold alloy and silver-palladium alloy but the total amount of nickel and beryllium released was not decreased markedly in the case of galvanic couples of the titanium in contact with nickel-chromium alloy(p<0.05). 7. In the case of galvanic couples of titanium in contact with gold alloy, galvanic current was lower than any other galvanic couple. 8. In the case of galvanic couples of titanium in contact with nickel-chromium alloy, galvanic current was highest among other galvanic couples.

• 폴리머
• /
• 제38권2호
• /
• pp.257-264
• /
• 2014

본 연구에서는 나노크기의 실리카 입자를 2차 아미노기를 가지는 dipodal 형태의 실란커플링제인 bis[3-(trimethoxysilyl)propyl]ethylenediamine(BTPED)으로 표면 개질한 후, 실리카에 도입되는 2차 아미노기인 N-H기와 마이클 부가 반응이 가능한 acrylate기를 가지는 3-(acryloyloxy)-2-hydroxypropyl methacrylate(AHM)로 표면 처리를 하여 중합 반응성 methacrylate기를 도입하는 연구를 수행하였다. 1 분자에 2차 아미노기를 2개 가지는 BTPED와 마이클 부가 반응성이 있는 acrylate기와 부가 반응성이 없는 methacrylate기를 각각 1개씩 가지는 AHM을 사용하여 BTPED와 AHM의 투입량 및 개질 반응 시간의 변화가 실리카 표면의 methacrylate기 도입에 미치는 영향을 Fourier transform infrared spectroscopy(FTIR), elemental analysis(EA)와 액체 및 고체 상태 cross polarization magic angle spinning(CP/MAS) nuclear magnetic resonance spectroscopy(NMR)법을 사용하여 분석하였다. 실리카 표면에 BTPED 를 도입하는 반응은 1시간 내에, BTPED로 개질된 실리카의 N-H기에 대한 AHM의 acrylate기와의 마이클 부가 반응에 따른 methacrylate기 도입은 2시간 내에 반응이 각각 완결됨을 확인하였다. 또한 BTPED로 개질된 실리카에 대하여 투입되는 AHM의 몰 비가 증가할수록 N-H기와 acrylate기의 마이클 부가 반응으로 인한 methacrylate기의 도입이 증가하였으며 이는 AHM을 도입했을 때 나타나는 FTIR 스펙트럼의 C=O 피크 면적 변화로 확인하였다. 위의 결과를 EA 및 고체 상태 $^{13}C$ 및 $^{29}Si$ NMR 분석으로도 확인하였다.

• 한국산업보건학회지
• /
• 제22권4호
• /
• pp.337-344
• /
• 2012

Objectives: This study was conducted to assess the trend of work-related accident rate in the past 10 years (2002~2011) in Gusan district, Ministry of Employment and Labor, Korea. Methods: To analyze the change of work-related accident rate in the past 10 years in Gunsan District, we analyzed the work-related accident and disease by the type of business, business scale and analyzing the victim's age and job period using workplace information management system(PKMS) in the Ministry of Employment and Labor. Results: The average rate of work-related accidents in Gunsan district was 0.96% in the past 10 years and it was a little higher than that of national average 0.75%. The rates of work-related accidents tended to decrease from 1.11% in 2002, to 1.09% in 2006, and to 0.79% in 2011. Mortality (per 10,000) rates also tended to decrease in the years 2002, 2006, and 2011 as 3.07, 2.46, and 1.53. By the type of business, the average rate of work-related accidents in the past 10 years was the highest in agriculture as 1.77%, followed by forestry farming at 1.76%. By the business scale, the average rate of work-related accidents was the highest in the group of under 5 employees as 2.05% and it was the lowest in the group of more than 300 employees as 0.50%. The ratio of work-related accidents in the 30's age group was decreased from 41.7% in 2002 to 25.2% in 2011 and the ratio for the 50's age group was increased from 28.6% in 2002 to 49.5% in 2011. Conclusions: Although the rate of work-related accident was decreased in the past 10 years, the polarization of work-related accidents rated by the business scale and age groups show a significant difference. So it is needed that the planning and implementing of work-related accidents prevention policies.

• 한국식품영양과학회지
• /
• 제24권5호
• /
• pp.702-706
• /
• 1995

A major component(compound A) in the ethylacetate fraction exhibited a strong antimicrobial activity was identified by UV, IR, FABMS and NMR. The compound A showed strong absorbance at 209, 259 and 359nm, indicating a flavonoid ring structure. IR spectrum possessed absorbance of OH at 3400∼3300cm-1, ketone at around 1650cm-1, and aromatic C=C at around 1660cm-1. Molecular weight of the compound A calculated as 478 from the information of m/z 479(M＋H)+ and m/z 477(M-H)+ in the FABMS spectrum. Molecular formula of this compound was found to be C22H22O12 from m/z 479.1220(＋3.1mmu for C22H23O12) of HRFABMS spectrum and from 13C-NMR spectrum. 1H-NMR and 13C-NMR spectra of the compound A revealed aromatic proton and benzene rings. Distortionless enhancement by polarization transfer(DEPT) exhibited that the compound A possessed 10 quaternary carbons and 3 substituted benzene rings including a methoxy group substitution. The compound A was identified as isorhamnetin 3-O-β-glucopyranoside by spectrophotometric methods in conjunction with 1H-1H COSY, 1H-13C COSY and HMBC, which revealed a flavone with OH group at 3, 5, 7, and 4' and methoxy group at 3' positions esterified to glucose.