• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.701-703
• /
• 2014

The intense noise generated by military aircraft hans a significant impact on ground crews and their families on airbase. For minimizing the impact of the aircraft noise on the airport, appropriate indoor noise standard is required. This paper studied to establish the indoor noise standard on the military airport. The aircraft noise was measured and analyzed the frequence characteristics. the remodeling of office for the noise mitigation was enforced to verify the appropriate internal noise standard and to select the method of reinforcement. The noise standard was classified three categories according to the dwelling, office and usage of building with flight train facilities and banishment in military airfield.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.7 s.100
• /
• pp.806-812
• /
• 2005

This paper adresses the shaking table tests with 1/100 scaled model followed similitude law for OOdam main designing section to understand nonlinear behavior characteristics of concrete dam body by ground motion. As earthquake wave, Hachinohe and El Centre waves were used and acceleration and displacements are measured to analyze behaviors of dam body. For maximum ground acceleration range $(0.3\~0.9 g)$, the results showed linear behavior regardless of maximum 9round acceleration and secured safety of structure. To analyze the behavior of dam after tension cracking, 3 cm-notch was placed at the critical section of over-flowing section. As results of applying Hachinohe wave(0.8 g), Even though tension cracks were formed at over-flowing section by Hachinohe wave(0.8 g), it showed that the dam is stable for supporting upper stream Part of water tank of dam.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1020-1025
• /
• 2001

Vertical canned pumps are usually applied in the power plant to transport fluids that the available suction pressure is low at the condensate system and the circulating-water system. The top of the motor driver is 5.5m above the base and the barrel and drop column extend even further below the ground. While this size and configuration may produce an efficient pumping system, it also introduces several dynamic problems which must be considered in order to obtain a reliable operation. The main problem is that the vibrational mode of the long flexible cantilever structure above the ground exist near the operational characteristics of the condensate debris system. This system's trouble has been showed at 2,086 hp condensate water loading pumps in a nuclear power plant.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.45-48
• /
• 2005

Tile gust generator was designed for generating the gust field in the wind tunnel test of the scaled flexible wing model for validating gust response alleviation system. The ground operation test was performed for estimating the dynamic performance of tile gust generator before installing it in the wind tunnel for gust field measurement. The ground test results showed that the gust generator has sufficient dynamic capability to simulate the sinusoidal and random motion of the gust generator wing and thus can be used in the wind tunnel test related to gust.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.793-798
• /
• 2001

This paper is basic study of seismic response analysis for the large scaled structures subjected to seismic loading. The authors propose seismic response analysis algorithm for the multi-story structures, which are subjected to ground acceleration. This analysis method is derived from an combination of the transfer stiffness coefficient method(TSCM) and Newmark method. Numerical computation is performed for simple multi-story structures acting on an arbitrary ground acceleration. Numerical results by the TSCM which is applied to the various strong ground motion are compared with results by central difference method and Runge- Kutta method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.8 s.113
• /
• pp.806-813
• /
• 2006

An important factor of vibration test using MAST(multi axial simulation table) system is the reliance of input excitation source. Generally the generation of input excitation source is obtained by the measured data on special road in proving ground. The measured data on special road have more exciting energy than the data of real fields, therefore the time and expense for test can be reduced. But the magnitude of input excitation source must be defined by comparison with the excited energy on real field. The object of this paper makes the data base of domestic roads for the definition of input excitation source which is obtained by the measured data on special road in proving ground. These real field data on domestic roads are analyzed by the power spectral density and interrelationship index.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.2
• /
• pp.95-104
• /
• 2004

Leaks in underground pipelines can cause social, environmental and economical problems. One of relevant countermeasures against leaks is to find and repair of leak points of the pipes. Leak noise is a good source to identify the location of leak points of the pipelines. Although there have been several methods to detect the leak location with leak noise, such as listening rods, hydrophones or ground microphones, they have not been so efficient tools. In this paper, accelermeters aroused to detect leak locations which could provide an easier and more efficient method. Filtering, signal processing and algorithm of raw input data from sensors for the detection of leak location are described. A 120m-long and a 70m-long experimental pipeline systems are installed and the results with the systems show that the algorithm with the accelerometers offers accurate pinpointing for leaks location detection. Theoretical analysis of sound wave propagation speed of water in underground pipes, which is critically important in leak locating, is also described.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.297-302
• /
• 2007

Vibrating test of vehicle component can be possible in lab-based simulators instead of field testing owing to the development of technology in control algorithm as well as computational process. Currently, Multi-Axial Simulation Table(MAST) is recommended as a vibrating equipment, which excites a target component for 3-directional translation and rotation motion simultaneously and hence, vibrational condition can be fully approximated to that of real road test. But, the vibration-free performance of target component is not guaranteed with MAST system, which is only simulator subjective to the operator. Rather, the reliability of multi-axial vibration test is dependent on the quality of input profile which should cover the required severity of vibrating condition on target component. In this paper, multi-axial vibration testing methodology of vehicle component is presented here, from data acquisition of vehicle accelerations to the obtaining the input profile of MAST using severe data at proving ground. To compare the severity of vibration condition, between real road test and proving ground one, energy principle of equivalent damage is proposed to calculate energy matrices of acceleration data and then, it is determined the optimal combination of special events on proving ground which is equivalent to real road test at the aspects of vibration fatigue using sequential searching optimal algorithm. To explain the vibration methodology clearly, seat and door component of vehicle are selected as a example.

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.597-604
• /
• 1997

Ground vibrations induced from railroad were measured to get the basic data that can be usde to prepare countermeasures for solving environmental vibration problems. Vibration levels were measured simultaneously at three points in double distances from railroad. These data were analuzed with the kinds of trains, media to understand the magnitudes and characteristics of distance attenuation of railroad vibrations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.146-153
• /
• 2003

본 논문은 열차 곡선부 노선에서 발생하는 진동크기의 예측을 위한 것으로, 곡선부를 주행하는 틸팅 차량에 의해 발생하는 진동크기를 수치해석적으로 예측한 결과이다. 곡선부를 주행하는 틸팅차량에 의한 진동의 특징으로, 진동의 방향성분을 들 수 있다. 진동의 방향성분은 직선 구간에서는 수직성분이 월등히 우세하나, 곡선구간에서는 수평성분이 크게 증가한다. 틸팅차량의 경우, 일반열차에 비해 곡선 구간에서의 높은 속도로 인해 수평성분이 크게 발생한다 따라서 틸팅차량의 주행에 의한 인근 지역에서의 진동환경을 파악하기 위해서는 수직성분 뿐 아니라 수평성분의 정확한 파악도 필요하다. 이러한 진동의 방향성분은 근거리 또는 원거리 영역에 파라 달라져, 이의 파악을 위한 연구가 필요하다.