• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.639-648
• /
• 2017

Electronic warfare systems for extracting information of the threat signals can be employed under the circumstance where the power of the received signal is weak. To precisely and rapidly detect the threat signals, it is required to use methods exploiting whole energy of the received signals instead of conventional methods using a single received signal input. To utilize the whole energy, numerous sizes of windows need to be implemented in a detector for dealing with all possible unknown length of the received signal because it is assumed that there is no preliminary information of the uncooperative signals. However, this grid search method requires too large computational complexity to be practically implemented. In order to resolve this complexity problem, an approach that reduces the number of windows by selecting the smaller number of representative windows can be considered. However, each representative window in this approach needs to cover a certain amount of interval divided from the considering range. Consequently, the discordance between the length of the received signal and the window sizes results in degradation of the detection performance. Therefore, we propose the weighted energy detector which results in improved detection performance comparing with the conventional energy detector under circumstance where the window size is smaller than the length of the received signal. In addition, it is shown that the proposed method exhibits the same performance under other circumstances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.55-63
• /
• 2017

Due to spatial problems and system size,conventional measurement methods used to acquire the information needed for existing electrical energy and management have been limited to new buildings or areas where replacement is possible. This electric load management method is problematic when applying it to energy and safety management of vulnerable areas or existing homes or offices. The problem with installing a measurement module in every branch is that the system is too large. Even if the measurement module is installed, the type of load is not recognized, and efficient management is not performed. In particular, it is very difficult to apply it to traditional markets and backward facilities in Korea. In this paper, we apply NIALM technology and arc detection technology to solve these problems and verify the feasibility of NIALM for normal arc generation. Also, based on the verification results, we propose a new smart home safety management system that can effectively manage electrical safety and that can be applied to conventional market and existing home safety management systems. The proposed system conducts a comparative performance test with an existing safety management system. In addition, it achieves 95% or more load recognition for four loads, which is impossible in 40% of the existing systems, and the arc detection function was confirmed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.6
• /
• pp.61-71
• /
• 2017

The tracer gas method has an advantage that can estimate total and local ventilation rate by tracing air flow. However, the field measurement using tracer gas has disadvantages such as danger, inefficiency, and high cost. Therefore, the aim of this study was to evaluate ventilation rate in pig house by using the thermal distribution data rather than tracer gas. Especially, LMA (Local Mean Age), which is an index based on the age of air theory, was used to evaluate the ventilation rate in pig house. Firstly, the field experiment was conducted to measure micro-climate inside pig house, such as the air temperature, $CO_2$ concentration and wind velocity. And then, LMA was calculated based on the decay of $CO_2$ concentration and air temperature, respectively. This study compared between LMA determined by $CO_2$ concentration and air temperature; the average error and root mean square error were 3.76 s and 5.34 s. From these results, it was determined that thermal distribution data could be used for estimation of LMA. Finally, CFD (Computational fluid dynamic) model was validated using LMA and wind velocity. The mesh size was designed to be 0.1 m based on the grid independence test, and the Standard $k-{\omega}$ model was eventually chosen as the proper turbulence model. The developed CFD model was highly appropriate for evaluating the ventilation rate in pig house.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.4
• /
• pp.202-210
• /
• 2005

Since understanding on spatial variability of a field is essential to pursue precision agricultural technology, a field study for field variability and variable rate fertilization of nitrogen in a direct seeding paddy was attempted. Variable rate application of nitrogen was designed with soil test, and field application was tested in a direct seeding paddy in the Kimje, Jeonbuk, Korea. The grid samples of soil was collected from the field of which unit size was 35 m by 112 m on February before irrigating of the field. Soil organic matter, available phosphate and silicate, and extractable potassium were analyzed. Variable rate fertilizer recommendation maps of nitrogen for high yielding, HY, and low input sustainable agriculture, LISA, were derived based on the soil analysis. Direct seeding of rice was performed for variable rate treatment, VRT, for the experimental plot in 2001 and 2002, and so did for three volunteer farmers' field in 2003. Yield mapping was performed by harvesting. Economic feasibility of direct seeding of rice by variable rate fertilization was evaluated. Though increased yield of variable rate application and benefit of reducing fertilizer use and environmental impact, the cost for soil test exceeded the total reduced fertilizer cost.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.12-19
• /
• 2022

Propellant grains with embedded metal wires have been used for enhancement of burning rate while maintaining high loading density. For the performance design of a solid rocket motor using propellant grain with embedded metal wires, burn-back analysis is required according to number, location, arrangement angle of metal wires, and augmentation ratio of the propellant burning rate near a wire region. In this study, a numerical method to quickly calculate a burning surface area was developed in response to the design change of the propellant grain with embedded metal wires. The burning surface area derived from the developed method was compared with the results of a CAD program. Error rate decreased as the radial size of the grid decreased. Analysis for characteristics of burning surface area was performed according to the number and location of metal wires, the initial and final phases were shortened and the steady-state phase was increased when the number of metal wires increased. When arranging the metal wires at different radii, the burning surface area rapidly increased in the initial phase and sharply decreased in the final phase compared to the case where the metal wires were disposed in the same radius.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.109-119
• /
• 2022

The computational efficiency of reverse time migration (RTM) based on numerical modeling is not secured due to the high-frequency band of several hundred Hz or higher for data acquired through a three-dimensional (3D) ultra-high-resolution (UHR) seismic survey. Therefore, this study develops an RTM program to derive high-quality 3D geological structures using UHR seismic data. In the traditional 3D RTM program, an excitation amplitude technique that stores only the maximum amplitude of the source wavefield and a domain-limiting technique that minimizes the modeling area where the source and receivers are located were used to significantly reduce memory usage and calculation time. The program developed through this study successfully derived a 3D migration image with a horizontal grid size of 1 m for the 3D UHR seismic survey data obtained from the Korea Institute of Geoscience and Mineral Resources in 2019, and geological analysis was conducted.

• Environmental and Resource Economics Review
• /
• v.31 no.2
• /
• pp.165-204
• /
• 2022

This study organized data from 2000 to 2014 for 20 grid-connected countries in Europe and analyzed the determinants of carbon emissions through the panel GLS method considering the problem of heteroscedasticity and autocorrelation. At the same time, the effect of introducing ETS was considered by dividing the sample period as of 2005 when the European emission trading system was introduced. Carbon emissions from individual countries were used as dependent variables, and proportion of generation by each source, power self-sufficiency ratio of neighboring countries, power production from resource-holding countries, concentration of power sources, total energy consumption per capita in the industrial sector, tax of electricity, net electricity export per capita, and size of national territory per capita. According to the estimation results, the proportion of nuclear power and renewable energy generation, concentration of power sources, and size of the national territory area per capita had a negative (-) effect on carbon emissions both before and after 2005. On the other hand, the proportion of coal power generation, the power supply and demand rate of neighboring countries, the power production of resource-holding countries, and the total energy consumption per capita in the industrial sector were found to have a positive (+) effect on carbon emissions. In addition, the proportion of gas generation had a negative (-) effect on carbon emissions, and tax of electricity were found to have a positive (+) effect. However, all of these were only significant before 2005. It was found that net electricity export per capita had a negative (-) effect on carbon emissions only after 2005. The results of this study suggest macroscopic strategies to reduce carbon emissions to green growth, suggesting mid- to long-term power mix optimization measures considering the electricity trade market and their role.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_1
• /
• pp.469-480
• /
• 2017

This study aims to understand the relationship between lineaments and epicenters in Geochang region, Gyungsangnam-do, South Korea. An instrumental observation of earthquakes has been started by Korea Meteorological Administration (KMA) since 1978 and there were 6 earthquakes with magnitude ranging 2 to 2.5 in Geochang region from 1978 to 2016. Lineaments were extracted from LANDSAT 8 satellite image and shaded relief map displayed in 3-dimension using Digital Elevation Model (DEM). Then, lineament density was statistically examined by hotspot analysis. Hexagonal grids were generated to perform the analysis because hexagonal pattern expresses lineaments with less discontinuity than square girds, and the size of the grid was selected to minimize a variance of lineament density. Since hotspot analysis measures the extent of clustering with Z score, Z scores computed with lineaments' frequency ($L_f$), length ($L_d$), and intersection ($L_t$) were used to find lineament clusters in the density map. Furthermore, the Z scores were extracted from the epicenters and examined to see the relevance of each density elements to epicenters. As a result, 15 among 18 densities,recorded as 3 elements in 6 epicenters, were higher than 1.65 which is 95% of the standard normal distribution. This indicates that epicenters coincide with high density area. Especially, $L_f$ and $L_t$ had a significant relationship with epicenter, being located in upper 95% of the standard normal distribution, except for one epicenter in $L_t$. This study can be used to identify potential seismic zones by improving the accuracy of expressing lineaments' spatial distribution and analyzing relationship between lineament density and epicenter. However, additional studies in wider study area with more epicenters are recommended to promote the results.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.1-15
• /
• 2020

This study was designed to come up with a way of managing a cultural landscape forest by conducting research on the vegetation structure and growth characteristics. This study's target site, which was 45,201㎡ in size, was Pinus densiflora forest for Sugumagi placed at the entrance of Unmun Temple, Sinwon-ri, Unmun-myeon, and Cheongdo-gun in the southernmost part of Gyeongsangbuk-do, Korea. Sugumagi means the water of the valley flows far away, and where no downstream is visible according to feng shui. The historical sources of the Sugumagi Pinus densiflora forest at the entrance of Unmun Temple isn't clear. It waw only found at that location. The Pinus densiflora forest at the entrance of Unmun Temple is located in the waterway in terms of Feng Shui. The present condition of growth was investigated through a grid surveys of 98 trees and Pinus densiflora growth. As a result of the analysis of growth status, Pinus densiflora, Larix leptolepis, Zelkova serrata, Celtis sinensis, and Rhus javanica were distributed in the conopy layer, and 28 species including Ailanthus altissima were grown in the understroy layer, and 92 species, including Ampelopsis brevipedunculata, in the shrub layer. The plant community structure was divided into low, medium and high-density Pinus densiflora forests in the study area, based on the number in the conopy layer and the grade of and the trees analyzed. As a result of the analysis, the Pinus densiflora dominated the low, medium and high-density Pinus densiflora forests, and there were no competitive species. The relative dominance of the low-density Pinus densiflora forests was 46.9% on average, medium-density was 62.6% and 50.2% was found in high-density. The mean species diversity of Shannon in the low-density study was 0.7055, medium-density study was 0.8966 and the average species diversity of Shannon in the high-density study was 0.8317. The analysis of the age and growth of 25 sample trees in the Sugumagi Pinus densiflora forest shows that the distribution of the chest diameter (DBH) of the sample Pinus densiflora is 38 to 77cm with the average chest diameter being 61.1cm. The age was 84-161 years and the average was 114 years. In the Pinus densiflora forest, most(670,659, or 98.3%) of the tree trunk wound was collected for rosins during the Japanese colonia Era, Of the total 670, 659 were Pinus densiflora, 98.3% of the total. 394 were surgically repaired in 2005. For the preservation of the Sugumagi Pinus densiflora forest, dead trees should be replaced with substitute trees appropriate to the middle and south topography. It is demanded that foreign species such as Larix leptolepis in the research area should be removed and Pinus densiflora that underwent surgical operations should be regularly sterilized. It is also emphasized that the management of insecticide is important.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.109-119
• /
• 2016

The height datum of Korea is currently separated into land and sea, which makes it difficult to acquire homogeneous and accurate height information throughout the whole nation. In this study, we therefore tried to suggest the more effective way to transform the height information were constructed separately according to each height datum on land and sea to those on the unique height datum using precise geoid models and tidal observations in Korea. For this, Anmyeon island was selected as a study area to develop the precise geoid models based on the height datums land (IMSL) and sea (LMSL), respectively. In order to develop two hybrid geoid models based on each height datum of land an sea, we firstly develop a precise gravimetric geoid model using the remove and restore (R-R) technique with all available gravity observations. The gravimetric geoid model were then fitted to the geometric geoidal heights, each of which is represented as height datum of land or sea respectively, obtained from GPS/Leveling results on 15 TBMs in the study area. Finally, we determined the differences between the two hybrid geoid models to apply the height transformation between IMSL and LMSL. The co-tidal chart model of TideBed system developed by Korea Hydrographic and Oceanographic Agency (KHOA) which was re-gridded to have the same grid size and coverage as the geoid model, in order that this can be used for the height datum transformation from LMSL to local AHHW and/or from LMSL to local DL. The accuracy of height datum transformation based on the strategy suggested in this study was approximately ${\pm}3cm$. It is expected that the results of this study can help minimize not only the confusions on the use of geo-spatial information due to the disagreement caused by different height datum, land and sea, in Korea, but also the economic and time losses in the execution of coastal development and disaster prevention projects in the future.