• Journal of Food Hygiene and Safety
• /
• v.26 no.1
• /
• pp.49-56
• /
• 2011

To investigate the toxicological effects of ${\beta}$-glucan, we performed basic studying on ${\beta}$-glucan in Sprague-Dawley (SD) rats. Standard endpoints in this study included mortality, clinical observations, changes of body weights, analysis on food consumption, ophthalmoscopic examination, hematologic examination, serum biochemistry, analysis of organ weights, gross anatomic pathology and histopathology. No clinical signs and mortality were observed in animals treated with beta-glucan throughout the experimental period. The average body weight of each treatment groups showed similar levels at end of experiment. There were no treatment-related changes in mortality, body weights changes, food consumption, ophthalmoscopic examination. Although there were statistically significant differences between the control and treated groups in some relative and absolute organ weights, and hematological and biochemical analysis, the data were in biologically normal ranges and did not show a dose-dependent manner. In the morphological change, hepatic tissue were not showed ballooning degeneration and irregular arrangement of hepatic cell in ${\beta}$-glucan treatment groups with control group. Also, organs weights (liver, heart, kidney and stomach) and hematological indices (WBC, RBC, Hb, Hct and Platelet) did not show statistically significant differences among the experimental groups. In summary of these results, there were no changes in mortality, mean body weight, clinical signs, food consumption. There were no changes in ophthalmological examination, hematology, blood chemistry, necropsy and histopathology. In conclusion, although further investigation of glucan should be performed in the functions registered in many ancient literatures, ${\beta}$-glucan is physiologically safe and may have potential as candidate food for human health.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.248-255
• /
• 2013

This study examined an automated irrigation technique by a frequency domain reflectometry (FDR) sensor for scheduling irrigation for tomato (Solanum lycopersicum L. 'Starbuck F1') cultivation aimed at avoiding effluent from an open hydroponic system with coir substrate containing different ratios of chip-to-dust (v/v) content. Specifically, the objectives were to undertake preliminary measurements of irrigation volumes, leachate volume, volumetric water content and electrical conductivity (EC) in the substrate, plant growth, fruit yield, and water use efficiency resulting from variation in chip content as an initial experiment. Commercial coir substrates containing different percentages of chips and dust (0 and 100%, 30 and 70%, 50 and 50%, or 70 and 30%), two-story coir substrates with different percentages of chips in the lower layer and dust in the upper layer (15 and 85%, 25 and 75%, or 35 and 65%), or rockwool slabs were used. The results showed that a negligible or no leachate was found for all treatments when plants were grown under a technique for scheduling non-drainage irrigation using a frequency domain reflectometry (FDR) sensor. Daily irrigation volume was affected by chip content in both commercial and two-story slabs. The highest plant growth, marketable fruit weight, and water-use efficiency were observed in the plants grown in the commercial coir slab containing 0% chips and 100% dust, indicating that the FDR sensor-auto-mated irrigation may be more useful for tomato cultivation in coir substrate containing 0% chips and 100% dust using water efficiently and minimizing or avoiding leachate and thus increasing yield and reducing pollution. Detailed experiment is necessary to closely focus on determining appropriate irrigation volume at each of irrigation as well as duration of each individual irrigation cycle depending on different physical properties of substrates using an automated irrigation system operated by the FDR sensor.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.3
• /
• pp.245-265
• /
• 2004

This study was to compare the geological occurrences and geneses of the Myogi, Tsukinuno, Dobuyama and Kawasaki bentonite deposits distributed in the Tertiary sedimentary basins of NE Japan, and to compare the mineralogical and physicochemical properties of their bentonites. The Japanese bentonite deposits are mainly distributed in the Green-tuff region which was formed in Neogene. The shape of ore body of the Myogi, Tsukinuno and Kawasaki deposits formed by the diagenesis are layered and stratiform. In contrast to this, the Dobuyama deposit formed by hydrothermal alteration shows the cone shape. The mineralization age of four deposits are 1.8 ～ 21 Ha from Early Miocene to Pliocene. The Dobuyama bentonite with the highest montmorillonite content shows the highest surface area, CEC, MB adsorption, and strengths. The Tsukinuno bentonite with a little high montmorillonite content is characterized by strong alkalinity, high viscosity and swelling. The Kawasaki bentonite, the Na-Ca mixed type, shows higher viscosity and swelling than the Ca-type Dobuyama bentonite. The Myogi bentonite with the lowest montmorillonite content shows the properties of low viscosity, In adsorption, strengths and a little high CEC and surface area. The high CEC and surface area of this deposit is due to the sufficient occurrence of zeolite. A strong dispersion in the Na-type bentonite and a strong flocculation in the Ca-type bentonite took place, and both the types show a slow flocculation with time. The physicochemical properties of the bentonite are mainly controlled by the montmorillonite content, interlayer cations, and impurity minerals such as zeolite. But bentonites inconsistent to this factors are sometimes occurred. This is maybe due to the crystal chemistry such as layer charge of montmorillonite and crystal morphology of montmorillonite such as aspect ratio.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.584-590
• /
• 2012

Dried $Compositae$ flowers have traditionally been used for the treatment of anti-inflammatory and anti-oxidative stress in Korea. This paper investigates the effects of $Compositae$ extracts on the inhibition of proliferation and apoptosis of human gastric cancer AGS cells, human breast cancer MDA-MB-231 cells, and SK-BR-3 cells. The proliferation of AGS cells, MDA-MB-231 cells, and SK-BR-3 cells were determined by MTT assay. Several $Compositae$ extracts inhibited proliferation of AGS cells, MDA-MB-231 cells, and SK-BR-3 cells in a dose-dependent manner. To assess the apoptosis of $Compositae$ extracts, the nuclei of MDA-MB-231 cells were stained with DAPI. The presence of chromatin condensation in the $Compositae$ extract-treated cells was detected on a fluorescent microscope (${\times}200$). We conducted Western blot analysis of changes in Bcl-2, Bax, and p53 protein expression levels. Apoptosis by $Chrysanthemum$ $zawadskii$ subsp. coreanum, $Chrysanthemum$ $zawadskii$ var. $tenuisectum$ and $Rudbeckia$ $laciniata$ var. $hortensis$ treatment created a decrease in Bcl-2 expression, whereas the expression of Bax and p53 were increased. These results indicate that $Chrysanthemum$ $zawadskii$ $subsp.$ $coreanum$, $Chrysanthemum$ $zawadskii$ var. $tenuisectum$ and $Rudbeckia$ $laciniata$ var. $hortensis$ inhibit breast cancer cell growth through the induction of apoptosis.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.4
• /
• pp.1093-1124
• /
• 2014

Studies on the role of agricultural science colleges are mostly divided into agricultural production, which is the primary function of agriculture, and other functions, which have recently begun to be emphasized as a result of social needs. With the green revolution and the aging of the farming population, there is a strong view that the role of agricultural science colleges should remain as it is. However, agriculture is expanding in terms of concept and content by converging with other industries not traditionally associated with agricultural production. Thus, the fields that now need to form part of agricultural science knowledge are becoming more detailed and expansive. The government's perception remains at the level of merely fostering farmers. This was evident in a survey on the employment rate, a factor used to evaluate colleges, in which the role of agricultural science colleges was limited to fostering farmers. Agro- industry fields, other than agriculturalists, include general industries in which the academic fields of agricultural science are combined with other academic fields. Thus, even when someone is employed in an industry that requires background knowledge of agricultural science, there is often a perception that he or she is employed in a field that is irrelevant to the major. This study examines the role of agricultural science colleges in agriculture and farm villages by focusing on the employment of graduates of these colleges within agro-industry. We categorize academic research on agricultural science into 16 fields, based on the medium level of the National Standard Science and Technology Classification Codes. Then, we categorize the employment fields into 168 fields, based on the small classification level of the inter-industry relations classification. Thus, we investigate 220 departments of 37 colleges, nationwide. Our findings show that the average employment rate of graduates of agricultural science colleges is 69.0%. Furthermore, 33.0% of all employees work in agro-industry fields that require background knowledge in agricultural science, which is one out of three job seekers. Then, 3.6% of employees work in business startups in agro-industry. The aforementioned government survey showed that only 0.1% of all college graduates in Korea were employed as agriculturalists in 2013. However, our results showed that 13.3% of graduates were working as agriculturalists, which is significantly different to the results of the government survey. These results confirm that agricultural science colleges contribute greatly to the employment of graduates, including farmers, agro-industry, and business startups in agro-industry fields.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.258-292
• /
• 1996

In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.198-206
• /
• 2015

Purpose: We aimed to investigate the effect of combined various microgrooves and thermal oxidation on the titanium (Ti) and to evaluate various in vitro responses of human periodontal ligament cells (PLCs). Materials and methods: Grade II titanium disks were fabricated. Microgrooves were applied on titanium discs to have $0/0{{\mu}m}$, $15/3.5{{\mu}m}$, $30/10{{\mu}m}$, and $60/10{{\mu}m}$ of respective width/depth by photolithography. Thermal oxidation was performed on the microgrooves of Ti substrata for 3 h at $700^{\circ}C$ in air. The experiments were divided into 3 groups: control group (ST), thermal oxidation group (ST/TO), and combined microgrooves and thermal oxidation group (Gr15-TO, Gr30-TO, Gr60-TO). Surface characterization was performed by field-emission scanning microscopy. Cell adhesion, osteoblastic differentiation, and mineralization were analyzed using the bromodeoxyurdine (BrdU), Alkaline phosphatase (ALP) activity, and extracellular calcium deposition assays, respectively. Statistical analysis was performed using the oneway analysis of variance and Pearson's bivariate correlation analysis (SPSS Version 17.0). Results: In general, the combined microgrooves and thermal oxidation group (Gr15-TO, Gr30-TO, Gr60-TO) showed significantly higher levels compared with the control (ST) or thermal oxidation (ST-TO) groups in the BrdU expression, ALP activity, and extracellular calcium deposition. Gr60-TO group induced highest levels of cell adhesion and osteoblastic differentiation. Conclusion: Within the limitation of this study, we conclude that the Ti surface treatment using combined microgrooves and thermal oxidation is highly effective in inducing the cell adhesion andosteoblastic differentiation. The propose surface is also expected to be effective in inducing rapid and strong osseointegration of Ti oral implants.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.116-123
• /
• 2008

This study was carried out to investigate into the effect of light-emitting diode (LED) for the light quality as a light source on the broccoli seed germination and the physiological activity of vegetable sprouts. We have also germinated seeds of the broccoli and applied LED as a light quality such as blue, green, red, white, yellow and red + blue color lights to their sprouts for 14 hours and kept dark for 10 hours at the temperature of $25^{\circ}C$ (day)/$18^{\circ}C$ (night). Broccoli sprouts were extracted by methanol and their physiological activities were examined. All broccoli seeds were germinated at 3 days after seeding regardless of the light color. Total sprout fresh weight were mostly became highest by 0.389g (10 plants) at 8 days after seeding when their sprouts were grown under blue color light. Total phenol compound contents in broccoli sprouts were extremely increased by $83.0\;mg{\cdot}L^{-1}$ under the white light, and total flavonoid contents were most much more by $72.6\;mg{\cdot}L^{-1}$ under the blue light. DPPH radical scavenging activity at $2,000\;mg{\cdot}L^{-1}$ were most highest by 93.5% in broccoli sprouts grown under the white light. Nitrite radical scavenging activity at the concentration of $500\;mg{\cdot}L^{-1}$ in sprout extracts were the most increased by 66.9% under the yellow light, and tyrosinase inhibition activity at $2,000\;mg{\cdot}L^{-1}$ in sprout extracts were by 14.5% under red light.

• Journal of Plant Biotechnology
• /
• v.38 no.4
• /
• pp.293-300
• /
• 2011

This study is conducted to develop an efficient transformation system via particle bombardment with PLBs (Protocorm-like bodies) in Cymbidium. For this, pCAMBIA3301 vector which carries a herbicide-resistant bar gene and gus gene as a reporter gene was used for transformation with Cymbidium cultivars 'Youngflower ${\times}$ masako' line. To select transformants, proper concentration of herbicide, PPT (phosphinotricin), should be determined. As a result, 5 mg/l of PPT was selected as a proper concentration. Further, proper conditions for particle bombardment were determined to obtain a high frequency of transformation. Results showed that 1.0 ${\mu}g$ of DNA concentration, 1,100 and 1,350 psi for helium gas pressure, 1.0 ${\mu}m$ of gold particle and 6 cm of target distance showed the best result for the particle bombardment experiment. Also, pre-treatment with combination 0.2 M sorbitol and 0.2 M mannitol for 4 hrs prior to genetic transformation increased the transformation efficiency up to 2.5 times. Using transformation system developed in this study, 3.2 ~ 4.0 transgenic cymbidium plants can be produced from 100 bombarded PLBs on average. Putative transgenic plants produced in this system confirmed the presence of the bar gene by PCR analysis. Also, leaves from randomely selected five transgenic lines were applied for Basta solution (0.5% v/v) to check the resistance to the PPT herbicide. As a result, three of them showed resistance and one of them showed the strongest resistance with the maintenance of green color as non-transformed plants showed. Using this established transformation system, more genes of interests can be introduced into Cymbidium plants by genetic transformation in the future.

• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.181-191
• /
• 2014

Olon Ovoot gold mine, Mongolia, is located in the Omnogobi province which is south 500 km from Ulaanbaatar. The mine area consists of the Devonian Bot-Uul khudag formation, the Upper Devonian intrusions, and the Upper Devonian or the Early Jurassic quartz veins. The quartz veins contain from 1 to 32 g/t gold with an average of 5 g/t gold. The quartz veins vary from 0.2 m to 25 m and are concordant or discordant with foliation of the green-schist. The mineralogy of the quartz veins is simple and consists of mainly of white massive quartz with partly transparent quartz in cavity. Quartz, sericite, chlorite, pyrite and carbonates(ankerite, dolomite and siderite) were observed in the alteration zone. Carbonate minerals occur as disseminated, coarse or fine grains with quartz, sericite, chlorite and pyrite near vein margin or within wall-rock xenoliths in quartz vein. Ankerite is present as later dark grey ankerite(13.51 to 16.89 wt.% FeO) and early white grey ankerite(16.67 to 19.90 wt.% FeO). The FeO contents of early ankerite are higher than those of later ankerite. Dolomite contains from 3.89 to 10.44 wt.% FeO and from 0.10 to 0.47 wt.% MnO. Dolomite is present as dark grey dolomite(4.06 to 6.87 wt.% FeO), light white grey dolomite(6.74 to 7.58 wt.% FeO) and grey white dolomite(7.33 to 10.44 wt.% FeO). The FeO contents of white grey dolomite are higher than those of dark grey dolomite. Siderite contains from 34.25 to 48.66 wt.% FeO, from 6.79 to 14.38 wt.% MgO, from 0.06 to 0.26 wt.% MnO and from 2.08 to 8.08 wt.% CaO.