• 한국건축시공학회지
• /
• 제11권6호
• /
• pp.634-644
• /
• 2011

Recently, As a part of urban forestation, the introductions of green roofs into public projects has been actively driven. Supported by this policy, the sizes of domestic green roof related markets have been rapidly expanding and many types of root barrier materials developed in Korea or abroad are being commercially distributed. In this study, root barrier tests were conducted over two years with nine types of sheet type waterproof materials that are the most commonly used as root barrier layers in green roof systems. The test conditions prepared considered the climates, natural features and vegetation in Korea and the results and related root barrier performance were verified. From the results of this study, the necessity to improve the joint part of root barrier sheets and forming methods has been identified and a measure to improve domestic root barrier testing methods was proposed.

• Composites Research
• /
• 제30권3호
• /
• pp.175-180
• /
• 2017

탄소섬유 강화 복합재료는 가볍고, 우수한 물성을 가지고 있기 때문에 그 수요는 급격하게 증가되고 있다. 그에 따라, 탄소섬유 강화 복합재료의 기지로 재활용이 가능한 열가소성 수지를 사용한 복합재료 연구를 많이 진행하고 있다. 본 연구에서는 재활용 PET를 이용하여 재활용 복합재료에 대한 활용성 평가를 하였다. PET는 음료수 병으로 활용되는 폐기물을 수집하여 PET 필름을 제조하는 과정을 거쳤으며, PET 필름을 제조하기 위한 성형 온도와 시간의 차이에 따른 기계적 물성을 비교하여 최적의 성형온도와 시간을 분석하였다. 이를 바탕으로 재활용 PET 필름과 탄소섬유 매트를 이용하여 CF/PET 복합재료를 최적으로 성형하기 위한 변수를 관찰하였다. 성형 조건에 따른 기계적 물성을 굴곡시험으로 확인하였고, PET 필름이 탄소섬유 매트 내에 함침 되는 정도를 단면 사진으로, 그리고 계면 성질을 층간전단강도로 평가하였다. 궁극적으로 최적의 기계적 물성을 가지는 CF/PET 복합재료를 성형하기 위한 성형 조건이 $270^{\circ}C$와 5분임을 확인했다.

• Composites Research
• /
• 제30권3호
• /
• pp.169-174
• /
• 2017

유리섬유(GF) 강화 복합재료는 금속에 비해 경량화의 장점으로 인해 기체 부품 산업의 높은 성장률과 방산 산업의 발전으로 수요는 증가되고 있으며 제품의 형태를 다양하게 제작할 수 있는 RTM 공정으로 산업적으로 이용되고 있다. 본 연구에서는 경화제의 분자량에 의한 가교 밀도 차이에 따라 변화되는 RTM의 성형성과 복합재료의 기계적 물성 및 계면 물성의 차이를 관찰하고자 하였다. 이를 위해 동일한 에폭시를 사용하였으며 유사한 화학 구조의 경화제를 이용하였다. 시편은 RTM 공법으로 제작하였으며 기지의 특성을 알아보기 위해 점도 측정 및 기지 주입시간을 측정하였다. 유리 섬유/에폭시 복합재료의 기계적 물성을 실험하여 굴곡 강도를 측정하였으며 계면 물성을 평가하기 위해 층간전단강도(ILSS)와 계면전단강도(IFSS)를 측정하였다. RTM 공정 시 기지의 점도에 의해 섬유의 함침정도에 따라 복합재료의 섬유 무게 분율(wt %)은 변화되고 이에 따라 유리섬유/에폭시 복합재료의 기계적 물성의 차이가 확인되었다.

• 한국재료학회지
• /
• 제33권5호
• /
• pp.175-188
• /
• 2023

Water electrolysis holds great potential as a method for producing renewable hydrogen fuel at large-scale, and to replace the fossil fuels responsible for greenhouse gases emissions and global climate change. To reduce the cost of hydrogen and make it competitive against fossil fuels, the efficiency of green hydrogen production should be maximized. This requires superior electrocatalysts to reduce the reaction energy barriers. The development of catalytic materials has mostly relied on empirical, trial-and-error methods because of the complicated, multidimensional, and dynamic nature of catalysis, requiring significant time and effort to find optimized multicomponent catalysts under a variety of reaction conditions. The ultimate goal for all researchers in the materials science and engineering field is the rational and efficient design of materials with desired performance. Discovering and understanding new catalysts with desired properties is at the heart of materials science research. This process can benefit from machine learning (ML), given the complex nature of catalytic reactions and vast range of candidate materials. This review summarizes recent achievements in catalysts discovery for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The basic concepts of ML algorithms and practical guides for materials scientists are also demonstrated. The challenges and strategies of applying ML are discussed, which should be collaboratively addressed by materials scientists and ML communities. The ultimate integration of ML in catalyst development is expected to accelerate the design, discovery, optimization, and interpretation of superior electrocatalysts, to realize a carbon-free ecosystem based on green hydrogen.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.141-148
• /
• 2009

The purpose of this paper is to propose a standard test methods of resistance to root penetration for waterproofing and rootproofing membrane using green roof system. Green roof system is considered to be an important subject in construction industry for green growth project. At the same time, we have to consider the counterplan for protection the damage of waterproofing layer and concrete substrate from the penetration of plant root. But many kinds of materials for protection from root penetration are using in construction field. But the performance of those materials is not clear, and there is not test methods for the evaluation of performance. So in this paper, based on the research results of 4 institutes during four years and foreign cases, we made a standard test methods of resistance to root penetration for waterproofing and rootproofing membrane using green roof system. This test method deals with about environmental condition of laboratory, experimental facilities, kinds of plant, specimen of test, management methods, evaluation duration and documents, etc.

• Composites Research
• /
• 제31권2호
• /
• pp.57-62
• /
• 2018

순수한 유리섬유와 두 가지 사이징제가 코팅된 유리섬유/폴리디사이클로펜타디엔(p-DCPD) 복합재료의 계면물성 및 상온($25^{\circ}C$)과 저온($-20^{\circ}C$)에서의 기계적 물성을 평가하였다. 섬유의 사이징제를 용출하기 위하여 아세톤을 이용하였고, 용액을 건조 후 각각의 용출물에 대하여 적외선 분광 분석을 통해 비교하였다. 동적접촉각 측정을 통하여 섬유와 p-DCPD의 표면에너지를 분석하였고 이를 통하여 접착일을 계산하였다. 서로 다른 유리섬유의 기계적 물성을 알아보기 위하여 단섬유 인장실험을 진행하였고, 단섬유와 p-DCPD의 계면적 물성을 알아보기 위하여 반복인장하중실험을 진행하였다. 상온 및 저온에서의 기계적 물성을 알아보기 위하여 인장, 굴곡, 아이조드 충격실험을 진행하였다. 실험결과 표면의 인자에 따라 계면 및 기계적 물성이 달라지는 것을 볼 수 있었다.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.531-538
• /
• 2012

Hollow silica spheres were prepared by spray drying of precursor solution of colloidal silica. The precursor solution is composed of 10-20 nm colloidal silica dispersed in a water or ethanol-water mixture solvent with additives of tris hydroxymethyl aminomethane. The effect of pH and concentrations of the precursor and additives on the formation of hollow sphere particles was studied. The spray drying process parameters of the precursor feeding rate, inlet temperature, and gas flow rate are controlled to produce the hollow spherical silica. The mixed solvent of ethanol and water was preferred because it improved the hollowness of the spheres better than plain water did. It was possible to obtain hollow silica from high concentration of 14.3 wt% silica precursor with pH 3. The thermal conductivity and total solar reflectivity of the hollow silica sample was measured and compared with those values of other commercial insulating fillers of glass beads and $TiO_2$ for applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers and the $TiO_2$ is representative of infrared reflective fillers. The thermal conductivity of hollow silica was comparable to that of the glass beads and the total solar reflectivity was higher than that of $TiO_2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1331-1333
• /
• 2005

A magnesium thiogallate phosphor doped with europium was prepared by solid-state method. This phosphor has green emission near 535 nm due to the allowed transition from $4f^65d$ at an excitation state $(T_{2g})$ to $4f^7 (^8S_{7/2}) at a ground state of $Eu^{2+}$ ion. This phosphor shows a wide excitation spectrum from ultra violet (300 nm) to bluish green (515 nm).

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.691-699
• /
• 2015

To evaluate the possibility of charcoal as Green Infrastructure (GI) materials, data such as moisture content, amount of adsorbed water, and amount of evaporation were collected. Some data from previous study were referenced to find out if correlations exist between results in this study and previous study. Only porosity was directly related to moisture content. Two mechanical charcoal had better abilities than traditional charcoal in all three categories. Mechanical black charcoal chips produced by National Forestry Cooperative Federation (NFCFC) adsorbed 333.3% of water in thirty minutes, 297.5% in five minutes, and evaporated around 75% water in four days. This ability is much higher than other five charcoal. Even though results of test showed various degrees and NFCFC was the best as GI materials, data of charcoal were also within acceptable range based on generally accepted characteristics of GI materials.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2002년도 추계학술발표대회
• /
• pp.97-102
• /
• 2002

The Purpose of this study was to investigate the exterior materials of super high-rise housing more than 30 stories which were built in New York City between 1924 and 2004. The result of examining 153 buildings was as follows; Exterior materials of super high-rise housing which were used bricks, of the salt-glazed bricks, terra-cotta and ceramic tiles, jumbo bricks and bricks were preferred among them. The colour of bricks was yellow, yellow ochre, clear brown, brown, dark brown, orange, vermilion and red. Exterior materials of super high-rise hotel and hotel apartment were bricks and ceramic tiles in the early days but stones, curtain wall and glass(green glass, green-tinted glass, brown-tinted glass, black glass) after 1980s. The main colour of buildings extended gray, green, blue-tinted brown-tinted and black.