• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.275-278
• /
• 1995

In this paper, we consider a dynamic shape control problem with an example of controlling a flexible beam shape. Mathematical formulations are obtained by employing the Green's function approach. Necessary conditions for optimality are derived by considering the quadratic performance criteria. Numerical results for both of the dynamic and the static cases are obtained and compared.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.1-6
• /
• 1999

The preparation and electrical or optical characteristics of blue-green emitting powder type electroluminescent device(P-ELD) are described. In V-I and Y-L characteristics, current and luminance are increased with increasing frequency and voltage. Luminance was shown 840 cd/$\textrm{m}^2$ at operating condition of 20 kHz, 150 V It can be explained by eqivalent circuit of P-ELD.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.253-257
• /
• 2018

DNA metallization has been emerged as a candidate for fabricating nanocircuits because of its simple process over a large area on a surface. With unique properties, DNA can be an excellent template to achieve molecular electronics. Thus, we introduced the preparation and properties of DNA metallization, and also suggested future directions in this review.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.8
• /
• pp.62-68
• /
• 1998

Optical broadband second harmonic genration (SHG) in thin film waveguide structure was investigated. The copolymer poly(MMA-co-DR1MA) which was consiste dof PMMA (polymethylmethacrylate) and DR 1 (disperse red 1) was spin coated on the pyrex substrate. The green and near UV SHG were observe dfrom the fundamental beam even though the poled polymer has the absorption in second harmonic wavelength range. It was able to genrate SHG by cerenkov type phase matching. Th epoled polymer film thickness was decided by theoretical analysis. The green (532nm) and near UV SHG (370nm) were observed from the Q-switched Nd-YAG laser (1064nm) and Ti-sapphire laser (740nm). It was in good agreement with the experimental results.

• Electronics and Telecommunications Trends
• /
• v.24 no.5
• /
• pp.30-37
• /
• 2009

LED는 빛을 내는 반도체이다. LED는 백열전등에 비하여 전기 절감 효과가 높고, 형광 등에 비하여 수은을 사용하지 않아 친환경적이기 때문에 녹색성장의 대표주자 중 하나이다. 메모리 반도체와 전자통신 기기가 융합하여 지난 20년간 발전하여 왔듯이, 앞으로는 LED와 전자통신이 융합하여 새로운 형태의 융합 기술이 발전할 것이다. 현재 예상 가능한 LED 전자통신 융합 기술은 LED 조명과 동시에 통신을 할 수 있는 가시광 무선통신 기술과 감성 및 전기 절감을 실현할 수 있는 LED 조명 모듈간 유선 네트워킹 기술이다. 본 고에서는 LED 조명과 녹색성장이 연계된 배경, 가시광 무선통신의 국내 및 국제 표준 동향, LED 조명 네트워킹 기술을 설명한다. LED 융합 기술에 의하여 인간중심의 편리 시설을 제공하면서도 전기 절감 및 저탄소를 실현할 수 있다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.11
• /
• pp.894-901
• /
• 1991

Contact-type linear image sensors have been fabricated by means of RF glow discharge decomposition method of silane and hydrogen mixtures. The dependences of the electrical and optical properties of these sensor on thickness, RF power, substrate temperature and ambient gas pressure have been investigated. the ITO/i-a-Si:H/Al structure film shows photosensitivity of 0.85 and photocurrent to dark current ratio ($I_{ph}/I_{d}$) of 150 at 5V bias voltage under 200${\mu}W/cm^[2}$ red light intensity. Under 200${\mu}W/cm^[2}$ green light intensity, the ratio is 100. In order to investigate photocarrier transport mechanism and to obtain ${\mu}{\gamma}$ product we have measured the I-V characteristics of these sensors favricated with several different deposition parameters under various light sources. The linear inage sensor for document reading has been operated under reverse bias condition with green light source, resulting in ${\mu}{\gamma}$ product of about 1.5$[\times}10^{-9}cm^{2}$/V.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.2
• /
• pp.7-13
• /
• 1982

In this Paper, the radiation Patterns of long wire antennas are computed by applying Dyadic Green's Function to the propagation vector, This result is used to analyze the polarized radiation patterns for the various geometrical structures of the bent dipole antennas. When the ratio of the vertical portion over the total length of the bent dipole antenna is 0.4major angle and axail ratio are changed most sensitively for the azimuth rotation, and the radiation field propagates strongly perpendicular to the bent antenna plane.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.18-22
• /
• 1989

We calculate the distribution of the induced current on the strip by the TE waves on the infinite conducting strip. The boundary equations represented as the spatial domain function becomevery complicated equations including convolution integral. As we transform it to the spectral domain, we have a very simple equation expressed by some algebraic multiplication of the current density function and Green's function. It is shown that the computation result of the induced current distribution gives the optimum value, when the stop condition of iteration presented in this paper are satisfied.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.75-84
• /
• 1996

planar circulator swith arbitrarily shaped ferrite resonators are analyzed in this paper. First, resonant frequencies and field distributions for the magnetized ferrite resonator are obtained using finite element method (FEM). Then the RF voltage distributions and other circuit parameters of the circulator which is formed by connecting three suitable transmission lines ot the ferrite resonator are derived from the green function . To remove the spurious solutions in analyzing the ferrite resonator, the results of eigenvalue analysis by node based FEM are comapred with the edge based fEM. The green function is expanded in terms of normalized eigenfunctions of th ecorresponding wave equation. Circulator parameters for circular disk resonator are clculated and compared with the analytical results. The experimental data for the designed circulator using hexagonal reosnator in the 850 MHz frequency range agree well iwth the simulated data.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.55-63
• /
• 1995

By employing the concept of superimposing the induced current on partial scattere roled as a secondary source, matrix Green's function was derived. The procedure in the way of derivation presented here was based on the equivalence principle and the induction theorem and applying moment methods to the resulting electric field integral equation. As examples, the induced current on scatterers consisted of wire/plate conductor, the input impedance and gain patterns of corner reflector antenna were calculated. And computing times required for solving matrix equation were compared with those of conventional method.