• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.514-519
• /
• 2020

Graphite materials for lithium ion battery anode materials are the most commercially available due to their structural stability and low price. Recently, research efforts have been conducted on carbon coatings by improving side reactions at the edge site of carbon materials. The carbon coating process has classified into a CVD by chemical reaction, wet coating process with solvent and dry coating by mechanical impact. In this paper, the rapid crush/coating process was used to solve the problem of which only few parts of the carbon precursor (pitch) can be used and also environmental problems caused by solvent removal in the wet coating process. When the ratio of needle coke to pitch was 8 : 2 wt%, and the rapid crush/coating process was carried out, it was confirmed that the fracture surface was coated by pitch. The pitch-coated sample was treated at 2400 ℃ and 41.8% improvement in 10C/0.1C rate characteristic was observed. It is considered that the material simply manufactured through the simple crush/coating process can be used as an anode electrode material for a lithium ion battery.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.656-661
• /
• 2012

The palladium nanoparticles were self-assembled to make Pd-POSS using POSS-$NH_3{^+}$ (polyhedral oligomeric silsesquioxane) as a crosslinker. Graphene oxide (GO) was produced by the reaction of graphite under a strong acid and oxidizer and poly(acrylic acid) (PAA) was covalently grafted on the surface of graphene to make PAA-grafted graphene through the radical polymerization of acrylic acid and GO along with a reduction process under $NaBH_4$. The nanocomposites of Pd-POSS and PAA-grafted graphene were fabricated via ionic interactions between positively charged Pd-POSS and negatively charged PAA-grafted graphene. Pd-POSS nanoparticles were attached to the surface of PAA-grafted graphene through ionic interactions. The thermal stability of Pd-POSS/PAA-grafted graphene was higher than that of PAA and PAA-grafted graphene. The composition, structure, surface morphology, and thermal stability of the Pd-POSS/PAA-grafted graphene were studied by FE-SEM, AFM, TEM, FTIR, and TGA.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.723-729
• /
• 1993

Cu(II) ion-responsive chemically modifed electrodes (CMEs) were constructed by incorporating 1-(2-pyridylazo)-2-naphthol (PAN) into a conventional carbon-paste mixture of graphite powder and Nujol oil. Cu(II) ion was chemically deposited on the surface of the PAN-chemically modified electrode in the absence of an applied potential by immersion of the electrode in a buffer solution (pH 3.2) containing Cu(II) ion, and then reduced at a constant potential in 0.1 M KNO$_3$. And a well-defined voltammetric peak could be obtained by scanning the potential to the positive direction. The electrode surface could be regenerated with exposure to acid solution and reused for the determination of Cu(II) ion. In 5 deposition / measurement / regeneration cycles, the response could be reproduced with 6.1${\%}$ relative standard deviation. In case of using the differential pulse voltammetry, the calibration curve for Cu(II) was linear over the range of 2.0 ${times}$ 10$^{-7}$ ∼ 1.0 ${times}$ 10$^{-6}$ M. And the detection limit was 6.0 ${times}$ 10$^{-8}$ M. Studies of the effect of diverse ions showed that Co, Ni, Zn, Pb, Mg and Ag ions added 10 times more than Cu(II) ion did not influence on the determination of Cu(II) ion, except EDTA and oxalate ions.

• Clean Technology
• /
• v.26 no.2
• /
• pp.131-136
• /
• 2020

Biomass bamboo charcoal is utilized as anode for lithium-ion battery in an effort to find an alternative to conventional resources such as cokes and petroleum pitches. The amorphous phase of the bamboo charcoal is partially converted to graphite through a low temperature graphitization process with iron oxide nanoparticle catalyst impregnated into the bamboo charcoal. An optimum catalysis amount for the graphitization is determined based on the characterization results of TEM, Raman spectroscopy, and XRD. It is found that the graphitization occurs surrounding the surface of the catalysis, and large pores are formed after the removal of the catalysis. The formation of the large pores increases the pore volume and, as a result, reduces the surface area of the graphitized bamboo charcoal. The partial graphitization of the pristine bamboo charcoal improves the discharge capacity and coulombic efficiency compared to the pristine counterpart. However, the discharge capacity of the graphitized charcoal at elevated current density is decreased due to the reduced surface area. These results indicate that the size of the catalysis formed in in-situ graphitization is a critical parameter to determine the battery performance and thus should be tuned as small as one of the pristine charcoal to retain the surface area and eventually improve the discharge capacity at high current density.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.667-675
• /
• 1994

The precipitate flotation using $La(OH)_3$ as a coprecipitant was studied for the simultaneous determination of trace three elements in a sea water. Several experimental conditions such as pH, coprecipitant and surfactant were investigated with an artificial sea water. To remove the influence of Cr(VI) the Cr(VI) was reduced to Cr(III) using $NaBH_4$ prior to the flotation. Trace amounts of Cu(II), Co(II) and total Cr in 1.0 l sea water was coprecipitated together with the precipitation of $La(OH)_3$ in the solution of pH 9.8 adjusted with 3.OM NaOH solution. The precipitate was floated by using a mixed surfactant (1 to 8 of each 0.5% ethanolic sodium oleate and sodium dodecylsulfate solution) by bubbling a nitrogen gas. The floats was separated and filtrated from the mother liquor by suction. The precipitate was dissolved in 7.0 M $HNO_3$ solution and then marked to 25.0 ml with a deionized water. These elements were determined by graphite fumace atomic absorption spectrophotometry. This method was applied to determine the elements in the sea water of the Eastern and Western coasts. And the recoveries were over 90.0% in the samples into which given amounts of the analyte elements were spiked.

• Clean Technology
• /
• v.21 no.4
• /
• pp.265-270
• /
• 2015

In order to increase the capacity of the lithium ion battery, the capacity of the anode should be increased. SnO₂ and Li₄Ti₅O₁₂ were studied to replace the graphite as the anode materials. In this study, SnO₂/Li₄Ti₅O₁₂ composite materials were synthesized by solid-state method. The study reported here attempts to enhance the electrochemical capacity of Li₄Ti₅O₁₂ through the incorporation of SnO₂. Sn-based Li ion storage materials are loaded on Li₄Ti₅O₁₂ surface. The SnO₂/Li₄Ti₅O₁₂ composite material has higher capacity than Li₄Ti₅O₁₂, but the cycling capacity was decreased due to SnO₂.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.119-125
• /
• 2017

Ablative material in a rocket nozzle is exposed to high temperature combustion gas, thus undergoes complicated thermal/chemical change in terms of chemical destruction of surface and thermal decomposition of inner material. Therefore, method for conjugate analysis of thermal response inside carbon/phenolic material including rocket nozzle flow, surface chemical reaction and thermal decomposition is developed in this research. CFD is used to simulate flow field inside nozzle and conduction in the ablative material. A change in material density and a heat absorption caused by the thermal decomposition is considered in solid energy equation. And algebraic equation under boundary layer assumption is used to deduce reaction rate on the surface and resulting destruction of the surface. In order to test the developed method, small rocket nozzle is solved numerically. Although the ablation of nozzle throat is deduced to be higher than the experiment, shape change and temperature distribution inside material is well predicted. Error in temperature with experimental results in rapid heating region is found to be within 100 K.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1209-1215
• /
• 2013

Graphene is an allotrope of carbon that is composed of one-atom-thick planar sheets. It is known to have a preventive effect on cancer in photothermal therapy and a protective effect in DNA oxidation. The effect of graphene on oxidative stress and matrix metalloproteinases (MMPs) was investigated in human fibrosarcoma HT1080 cells. The results showed that graphene specifically exerted an inhibitory effect on DNA oxidation, but it did not inhibit other oxidative stress. In addition, graphene decreased the expression and the activation of MMP-2 and MMP-9 stimulated by phenazine methosulfate-m, which induces the production of intracellular hydrogen peroxide. In particular, the expression of antioxidant enzymes, such as superoxide dismutase (SOD-2), was decreased in the HT1080 cells, indicating that the decrease in the expression level of SOD was due to the antioxidant effect of graphene. These results suggest that the inhibitory effect of oxidative stress in the presence of graphene could inhibit the expression of MMPs in HT1080 cells. Based on the above results, graphene may have chemoprevention properties through inhibition of MMP-2 and MMP-9 related to metastasis.

• KSBB Journal
• /
• v.24 no.2
• /
• pp.207-211
• /
• 2009

In this study, the sensing membranes for detection of pH and dissolved oxygen(DO) were prepared by immobilizing 6-aminofluorescein or ruthenium complex onto the sol-gel matrixes of GPTMS, MTMS, and TEOS and then recoated with the mixture of hydrophobic sol-gel and graphite for light insulation. The pH and DO sensing membranes recoated with the light insulation layer showed a higher sensitivity than those without light insulation layer. The sensing membranes were immobilized on the wells of 24-well microplate and used to monitor the fluorescence intensity for pH and DO in E.coli JM109 and P.pastoris X-33 fermentation processes. The change of the fluorescence intensity in the DO sensing membrane agreed with the growth patterns of microorganisms, that the membranes are valuable to monitor the DO in fermentation processes. In the case of pH monitoring, the fluorescence intensity has showed good correlation to the off-line pH data, that the pH membranes are valuable to monitor pH values in fermentations.

• Journal of the Korean Chemical Society
• /
• v.40 no.12
• /
• pp.724-732
• /
• 1996

The organic precipitate flotation using Cu(II)-pyrrolidinedithiocarbamate complex as a coprecipitant was studied for the preconcentration and determination of trace Cd, Pb, Bi and Co in several water samples. Experimental conditions such as pH of solution, amounts of Cu(II) and ammonium pyrrolidinedithiocarbamate(APDC), stirring time, the type and amount of surfactant, etc. were optimized for the effective flotation of analytes. After 3.0 mL of 1,000 ${\mu}g/mL$ Cu(II) solution was added to 1.00 L water sample, the pH of the solution was adjusted to 2.5 with HNO3 solution. Trace amounts of analytes were coprecipitated by adding 2.0% APDC solution. And the precipitates were flotated onto the surface of solution with the aid of nitrogen gas and sodium lauryl sulfate. The floats were collected from mother liquor, and filtered through the micropore glass filter by suction. The precipitates were dissolved with 4 mL conc. HNO3, and then diluted to 25.00 mL with deionized water. The analytes were determined by graphite furnace atomic absorption spectrophotometry. This flotation technique was applied to the analysis of some water samples, and the 90 to 120% of recoveries were obtained from the spiked samples, this procedure could be concluded to be simple and applicable for the trace element analysis in various kinds of water.