• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.89-99
• /
• 1984

Engineering properties of soils is studied by permeating injection of water-glass chemical grout by use of a large sized grouting equipment of 1.5 shot system. Furthermore, the effectiveness of chemical groutinig by taking water-glass chemical grout combined with portland-cement for the purpose of improving the soil strength is confirmed. Relationships between main factors which cause the effectiveness of chemical grouting are described, and the factors are velocity and temperature of flowing water; grain size distribution and density of soils; density, viscosity, gel time and volume of grouts; injection pressure and grouting process. Improvement of the effectiveness of chemical grouting in flowing water by preventing the dilution and flowing down of grouts is investigated. Moreover, local shear failures and upheaval phenomena of ground are also investigated by field measurement.

• Journal of the korean society of oceanography
• /
• v.34 no.4
• /
• pp.220-230
• /
• 1999

Four tidal flats, covering two dissipative type beaches and two other tidal mud flats, around Yonaiong-Yongyu Islands, Inchon, Korea were studied in May 1991 to analyze the spatial distribution patterns of benthic communities on macrotidal flats. From the statistical test on spatial patterns of species number, density, and biomass, significant trends were found in species number and biomass. Although quantitative analysis was not performed, the interpretation showed that the variations were ruled out by environmental gradients such as sediment grain size and tidal elevation. The eight communities revealed in this study are as follows: Moerella-Mactra(Group 1), llyoplax-Glycera -Magelona japonica-Magelona sp.-Pe riserrula ( Group 2), Amphiura-Nephtys californiensis-Bullacta-Eohaustorius (Group 3), Leonnates-Heteromastus-Pretankyra-Nephtys polybranchia (Group4), Nephtys chemulpoensis-Macrophthalmus (Group 5), Ceratonereis-Scopimera (Group 6), Haustorioides-Urothoe (Group 7) and Cycladicama-Armandia-Minuspio community (Group 8). Some of these communities were classified into substratum-specific (Group 1 to 3) and tidal elevation-specific communities (Group 4). It was difficult to identify the predominant governing agent in Groups 5,6,7 and 8 because of their presence at extreme types of sediment and at uppermost elevations. Mixed effects seemed to act upon the latter four communities (Group 5 to 8). Based on the number of samples, 60% of the target samples were influenced by substratum properties, 20% by tidal elevation effect and 20% by mixed effect of the two factors. From this, it was concluded that substratum properties serve as the most important factors on soft bottom inhabitants in the area studied.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.404-410
• /
• 2009

In this study, research for physical and chemical characteristics were conducted through analysis of sediments, grading and heavy metals (e.g., Mn, Cu, Cd, Zn and Pb ) in sewers which are classified by drainage types. After that, cement solidification and yellow soil calcinations made heavy metals stabilized and then, ways of recycling it were examined. The grain size distribution of all sediments was relative graded. When evaluating heavy metal pollution through index of geoaccumulation (Igeo), Cu showed moderately pollution or strong pollution in forest and street site and Zn was assessed by moderately pollution in military, residential, and street site. Analysis of Pearson Correlation coefficient of heavy metal indicated that all items in street site have tight relationship respectively. Especially, Cd-Zn, Cu-Pb, Cu-Mn, and Pb-Mn have relationship at 99% confidence intervals in statistical analysis. Recycling it with cement solidification was satisfied with compressive strength standard under 55% deposit contents and Zn, Pb, Mn were stabilized effectively. If time and temperature plasticity and compressive strength would be standard, it is revealed that yellow soil calcinations is valuable aggregate when it has 50-60 Wt% contents. When considering economic feasibility and stabilization of heavy metals, cement solidification would be more appropriate than yellow soil calcinations as solution to recycling.

• Geotechnical Engineering
• /
• v.12 no.2
• /
• pp.107-114
• /
• 1996

A series of shear tests is performed to measure friction coefficients of the interface between different reinforcements and weathered granite soils. The reinforcements tested are smooth steel strip, Paraweb(friction tie) and geotextile with rough surface, while the weathered granite soils are composed of different, grain size distribution. Soils are compacted with the energy of 95% modified AASHTO and fully saturated before testing to simulate the worst site condition. Because of characteristics of the direct shear apparatus, shear strength is obtained in terms of drained condition. Test results show that the more fines the soils contain, the larger ratio of friction coefficient ($\mu=\frac{tan{\delta}}{tan{\Psi}}$) is obtained. Also the ratios are much higher for the Friction tie and the geotextile compared to the smooth steel strip. Those suggest that even weathered granite soils with 36% fines are possible to use as backfill of reinforced earth structures for the two reinforcements when a drainage system is provided.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.4
• /
• pp.298-303
• /
• 2012

$Y_{1-x}VO_4:Eu_x^{3+}$ red phosphors were synthesized with changing the mol ratios of $Eu^{3+}$ ions by using the solid-state reaction method. The crystalline structure of phosphors was found to be a tetragonal system with the maximum diffraction intensity at $25.02^{\circ}$. The grain particles showed the truncated hexagonal patterns with a very homogeneous size distribution at 0.05 mol of $Eu^{3+}$ ion. The excitation spectra of the phosphor ceramics were composed of a broad band centered at 303 nm and weak narrow multilines peaked in the range of 360-420 nm. The dominant emission spectrum was the strong red emission centered at 619 nm due to the $^5D_0{\rightarrow}^7F_2$ electric dipole transition. The experimental results suggest that the optimum doping mol ratio of $Eu^{3+}$ ions for preparing the red phosphors is 0.10 mol with the asymmetry ratio of 5.21.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.2
• /
• pp.145-154
• /
• 1990

Amounts of total suspended matter(TSM) around the Kori waters have been monitored for two years to understand the dispersal pattern of fine-grained sediment. Average concentration of the TSM is $3\~4\;mg/\iota$ in the surface and $3.5\~5\;mg/\iota$ in the near-bottom water. Semi-quantitative analysis for the four major clay minerals in TSM is also performed. The average relative abundance of each clay mineral such as illite, kaolinite, chlorite, and smectite is $65\%,\;17\%,\;17\%$, and $1\%$, respectively. It seems that the majority of recent fine-grained sediment deposited around the Kori area is derived from the Nakdong River. The texture of surface sediment is also dominated by fine-grained fraction leading up to $90\%$ of silt and clay content. The grain size decreases seaward progressively.

• Journal of Korea Water Resources Association
• /
• v.42 no.5
• /
• pp.425-432
• /
• 2009

Gongneung Weir 2 was built in 1970s to supply water for irrigation. For a long time, the weir was left uncared because of the land use change of the nearby area. The weir is 1.5 m high, and the stream in which the weir was installed has bed materials of fine sands to fine gravels. In 2006, the local government and residents agreed on uninstalling the weir, and the weir was removed completely on April 14. This paper reports the results of three field investigations for the study of the stream morphology change after the weir removal. Changes in grain size distribution, bed elevation, and cross section before and after the weir removal are provided and discussed. Net amount of sediment deposits within 1 km reach of the stream is estimated, and the results illustrates that the sediment process, leading to an equilibrium of the bed, progressed very swiftly, namely within 45 days.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1073-1082
• /
• 1999

본 논문에서는 시스템 내의 프로세서들을 효과적으로 사용하기 위한 적응적 프로세서 할당 정책을 제안한다. 프로그램의 병렬성을 향상시키기 위하여 일반적으로 병렬 처리에 사용될 프로세서 개수를 증가시킨다. 그러나 증가된 프로세서들은 그레인 크기에 변화를 일으키며 이는 캐쉬 성능에 영향을 미친다. 특히 대역이 제한된 공유 버스를 사용하는 시스템에서는 프로세서 개수의 증가는 공유 버스에 대한 접근 경쟁을 크게 증가하므로 버스에서 대기하는 시간이 프로세서 증가에 의한 계산 능력 이득을 상쇄시키는 주요한 원인이 되고 있다. 본 논문에서 제안한 적응적 프로세서 할당 정책은 프로그램이 수행되는 도중에 임의의 기간동안 공유버스에 대기중인 프로세서 분포에 관한 정보를 얻는다. 그리고 이 정보를 바탕으로 프로세서 개수를 변경하는 방법이다. 모의 시험에서 적응적 프로세서 할당 정책은 프로그램들의 버스 트래픽 특성에 따른 최적의 적합한 프로세서 개수를 발견함을 보인다. 그리고 적응적 프로세서 할당 정책은 고정된 프로세서 개수를 사용한 가장 좋은 성능보다는 다소 떨어진 성능을 나타내었으나 시스템의 프로세서 활용성을 높여 효과적 시스템 사용에 기여함을 보인다. Abstract In this paper, the adaptive processor allocation policy is suggested to make effective use of processors in system. To enhance the parallelism, the number of processors used in the parallel computing may be increased. However, increasing the number of processors affects the grain size of the parallel program. Therefore, it affects the cache performance. In particular, when the shared bus is employed, since increasing the number of processors can result in a significant amount of contention to achieve the shared-bus, the increased computing power is offset by the bus waiting time due to these contentions. The adaptive processor allocation policy acquires the information about the distribution of waiting processors on shared bus for any execution period of programs. And it changes the number of processors working in parallel processing during the program's run. Our simulation results show that the adaptive processor allocation policy finds the optimum feasible number of processors based on the bus traffic characteristic of programs. Thus, it contributes to effective system utilization, even though it performs slightly less efficiently than using a fixed number of processors with the best performance.

• 한국해양학회지
• /
• v.4 no.1
• /
• pp.9-16
• /
• 1969

The sand drift movement at Young Il Bay area was tentatively investigated using Co-60 glass sand. Grain size and specific gravity of the glass sand which has originally contained natural cobalt, Co-59, was made similar to those of the real coastal sand, and was irradiated in a beam port of the reactor Triga Mark II to make the glass sand radioactive by the reaction of 59Co(n, r)60Co. The radioactive cobalt glass sand was deposited on the preselected point of sea bed, and, after a couple of weeks, the drift of sand was traced by means of specially designed water-proof G-M detector. Net counts at each point were plotted to figure out equicount lines and consequently such aspects as the direction of sand drift movement, the scope of distribution and the relative drift velocity etc. were indicated.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.2
• /
• pp.145-156
• /
• 1999

The distribution of the second phase, the change of transformation temperature and mechanical properties with thermomechanical treatment conditions were investigated by metallography, calorimetry, EDS, tensile test and fractography in a Cu-Al-Ni-Ti-Mn alloy. The cast structure revealed Ti-rich precipitates($X_L$ phase) between dendrite arms, which have been identified as $(Cu,Ni)_2TiAl$ intermetallic compounds. By homogenizing above $900^{\circ}C$, the $X_L$ phase was melted in the matrix, while the Xs phase was precipitated in matrix and the volume fraction of it was increased. When hot-rolled specimen was betatized below $750^{\circ}C$, recrystallization could not be observed. However, the specimen betatized above $800^{\circ}C$ was recrystallized and the grain size was about $50{\mu}m$, while Xs phase was precipitated in matrix. With raising betatizing temperature, $M_s$ and $A_s$ temperatures were fallen and transformation hysteresis became larger. The strain of the specimen betatized at $800^{\circ}C$ was 8.2% as maximum value. The maximum shape recovery rate could be obtained in the specimen betatized at $800^{\circ}C$ but it was decreased due to the presence of Xs phase with increasing betatizing temperature.