• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.296-304
• /
• 2018

The objective of this study was to analyze the impact of climate change on rice yield and quality. Experiments were conducted using SPAR(Soil-Plant-Atmosphere-Research) chambers, which was designed to create virtual future climate conditions, in the National Institute of Crop Science, Jeonju, Korea, in 2016. In the future climate conditions($+2.8^{\circ}C$ temp, 580 ppm $CO_2$) of year 2051~2060 according to RCP 8.5 scenario, elevated temperature and $CO_2$ accelerated the heading date by about five days than the present climate conditions, resulted in a high temperature environment during grain filling stage. Rice yield decreased sharply in the future climate conditions due to the high temperature induced poor ripening. And the spikelet numbers, ripening ratio, and 1000-grain weight of brown rice were significantly decreased compared to control. The rice grain quality was also decreased sharply, especially due to the increased immature grains. In the future climate conditions, expression of starch biosynthesis-related genes such as granule-bound starch synthase(GBSSI, GBSSII, SSIIa, SSIIb, SSIIIa), starch branching enzyme(BEIIb) and ADP-glucose pyrophosphorylase(AGPS1, AGPS2, AGPL2) were repressed in developing seeds, whereas starch degradation related genes such as ${\alpha}-amylase$(Amy1C, Amy3D, Amy3E) were induced. These results suggest that the reduction in yield and quality of rice in the future climate conditions is likely caused mainly by the poor grain filling by high temperature. Therefore, it is suggested to develop tolerant cultivars to high temperature during grain filling period and a new cropping system in order to ensure a high quality of rice in the future climate conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.2
• /
• pp.146-152
• /
• 2015

Early-maturing Korean Japonica cultivars and Jungmo1024 were used as plant materials to evaluate hightemperature tolerance during grain filling stage. National Institute of Crop Science (NICS) in Korea developed Jungmo1024, a mutant line from Namil (wild type) treated by using sodium azide (SA) as mutagen. To evaluate high-temperature tolerance, all cultivars were exposed to high-temperature (day $31.5{\pm}2.5^{\circ}C$/ night $27.5{\pm}1.3^{\circ}C$) and ordinary temperature (day $27.5{\pm}1.8^{\circ}C$/ night $24.7{\pm}1.6^{\circ}C$) during grain filling stage. In these conditions, we performed compared evaluation of grain shape such as length and width and grain quality by using a 1625 Cervitec grain inspector. High-temperature during grain filling stage caused decrease of grain shape. In grain shape such as length and width, the decrease rate of width (average 6.3%) was higher than the decrease rate of length (average 1.3%). Hence, high-temperature affected width of grain than length of grain. In addition, high-temperature showed a decided difference in rate of head rice between ordinary temperature (average 76.3%) and high-temperature (average 13.3%).As a result, Taebong, Ungwang, Manan, and Jungmo1024 seemed relatively a decent high-temperature tolerance than other cultivars. Especially, Jungmo1024 seemed remarkable rate of head rice (average $34.4{\pm}6.2%$) than other cultivars under high-temperature. It is considered that a genetic trait of Jungmo1024 can be useful to improve breeding for high-temperature tolerance.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.12
• /
• pp.1544-1553
• /
• 1999

Recently, ultrasonic testing techniques have been widely used in the evaluation of the quality of metal. In this experiment, six heat-treated temperature of specimen have been considered : 0, 1200, 1250, 1300, 1350 and 1387$^{\circ}C$. As heat-treated temperature increases, the grain size of stainless steel also increases and then, eventually make it destroy. In this paper, a pattern recognition method is proposed to identify the heat-treated temperature of metals by evidence accumulation based on artificial intelligence with multiple feature parameters; difference absolute mean value(DAMV), variance(VAR), mean frequency(MEANF), auto regressive model coefficient(ARC), linear cepstrum coefficient(LCC) and adaptive cepstrum vector(ACV). The grain signal pattern recognition is carried out through the evidence accumulation procedure using the distances measured with reference parameters. Especially ACV is superior to the other parameters. The results (96% successful pattern classification) are presented to support the feasibility of the suggested approach for ultrasonic grain signal pattern recognition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.73-78
• /
• 2000

This study was conducted for 2 years at Chinju region to establish suitable seeding rate and fertilizing levels of nitrogen, phosphorous and potassium in spring-sown Jinyangbori. Heading and maturing were delayed by increasing fertilizers, especially nitrogen. Number of spikes per were secured by much seeding and increased application of nitrogen. One thousand grain weight reduced with increasing fertilization at any seeding rate. Relatively high harvest indices were observed with 12-10-4 at 10kg. 10a$^{-l}$ seeds planted, followed by 6-10-8 at 15 kgㆍ 10a$^{-1}$, and 6-10-4kgㆍ 10a$^{-l}$ at 20kg ㆍ 10a$^{-l}$ of N-P-K fertilizing combinations, respectively. There was no distinct differences on yield for various seeding rates in spring-sown barley. When seeding rate increased up to 15kgㆍ10a$^{-1}$, the positive effect of fertilizers was recognized as the function of balanced-application. It was possible to recommend 10kgㆍ10a$^{-1}$ as seeding rate and 6-5-4(N-P-K)kgㆍ10a$^{-1}$ as fertilizing combination in spring-time seeding considering low input and sustainable agriculture. There was no significant difference of protein content in grain by seeding rate. Increase of nitrogen fertilizer enhanced protein content in grain.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.207-213
• /
• 1999

Thirty-eight glutinous rice varieties were classified into nine groups on the scatter diagram by the upper two principal components (56% contribution to the total information) based on eleven physicochemical characteristics including the viscograms and physical properties of cooked rice. The first principal component was the factor mainly associated with the viscogram characteristics of rice flour emulsion and the second was the factor chiefly related to the physical properties of cooked rice and water absorbability of rice grain. Indica glutinous rices were clearly distinguished from japonica ones by the first principal component score. Javanica glutinous rices were widely distributed on the intermediate zone between indica and japonica or on several japonica rice groups. Significant positive or negative correlations were found among water absorption rates of rice grain, physical properties of cooked rice, and viscogram characteristics of rice flour. Especially in japonica glutinous rices, the breakdown and setback viscosities of rice flour were closely associated with the alkali digestion value of milled rice and the stickiness of cooked rice. The frequency ratio of short glucose chains (A-chain) to intermediate glucose chains (B-chain), the ratio of B- chains to long glucose chains (C-chain) and the relative frequency of A- or B-chain fractions representing the amylopection structure of rice starch was closely associated with the breakdown and setback viscosities of rice flour.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.87-96
• /
• 1998

The bending performances were evaluated at the radiata pine plywood through veneer compositions encompassing veneer quality, ply-numbers and overlays of the high density- or medium density-phenol resin impregnated sheets (hereafter abbreviated as resin sheets) on the raw plywood. In addition, a prediction on the bending MOE of veneers and plywoods was carried out by the nondestructive testing with stresswave timer. The summarized results were as follows: I. Bending strength and bending MOE of resin sheets-overlaid plywoods in parallel surface grain direction through 5 and 7ply were increased by 13 to 45% and 17 to 34%, respectively. Resin sheets-overlay occurred an increasing effect of the strength efficiency i.e. strength perpendicular-to-grain direction versus that parallel-to-grain direction, showing the phenomenon that the plywood strength becomes greater at the perpendicular-to-grain direction of 7ply than at that of 5ply. Displacement at bending failure had a greater trend at 7ply than at 5ply, and was decreased by resin sheets-overlay. 2. After the nondestructive bending MOEs were measured for individual veneers, these veneers were rearranged in plywood-manufacture. In these plywoods, including resin sheets-overlay, the actual MOE was predictable with feasibility of $R^2$=0.53, and also the nondestructively-evaluated MOE was lower by 20% in raw plywood, and higher 20% in LVL than actual bending MOEs.

• Plant Biotechnology Reports
• /
• v.4 no.1
• /
• pp.61-73
• /
• 2010

Quantitative trait loci (QTL) associated with six physical traits of cooked rice and seven chemical properties of rice grain were identified using a recombinant inbred (RI) population of rice evaluated over 3 years at the National Honam Agricultural Research Institute in Korea. The RI population consisted of 164 lines derived from a cross between Milyang23 and Gihobyeo, and the genetic map consisted of 414 molecular markers. A total of 49 QTL were identified for the 13 physico-chemical properties using composite interval mapping. Of these, 13 QTL were identified for 2 or more years, while 36 were detected in only 1 year. Five QTL were identified over all 3 years and will be useful for marker-assisted improvement of rice grain quality in Korea. The two QTL with the highest LOD scores, adhesiveness1.2 and potassium content7.1, provide a valuable starting point for positional cloning of genes underlying these QTL.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.2
• /
• pp.203-211
• /
• 2013

Selected 11 rice transgenic lines, through preliminary yield trials on 32 lines, were evaluated on important agronomic traits as well as grain quality by conducting replicated yield trials having three replication plots. Japonica recipients, Nipponbare, Nagdongbyeo, and Dongjinbyeo, were the recipients of 7 transformed genes, which were putatively related with high yield, abiotic stress tolerance, and disease resistance. To estimate the degrees of deviations from the wild types, 11 traits of transgenic lines, relating with grain quality were evaluated and subjected to multivariate analyses. Principal coordinate and clustering analyses did not support collection manners of transgenic lines in terms of the genes transformed as well as the genetic background. Meanwhile, some transgenic lines would be acceptable due to their over-all performances were similar to their wild types, it was hardly possible to declare any transgenic line, which adhered closely to the commercial profits of wild type. Thereby, with considerations on the demanding resources in establishing rice transgenic lines having market competitiveness, it was speculated that proper application of breeding strategies would be crucial factor for the efficiency of developing prospective rice transgenic lines.

• Korean Journal of Plant Resources
• /
• v.35 no.5
• /
• pp.686-695
• /
• 2022

The grain yield and flour quality of winter wheat (Triticum aestivum L. 'Jokyung') were investigated in the paddy fields in which the double-cropping of wheat linked to rice (Oryza sativa L.) and its alternative crops [black soybean (Glycine max (L.) Merr.), sesame (Sesamum indicum L.), and perilla (Perilla frutescens (L.) Britton)] was applied. In the soils in which black soybean, sesame, and perilla as pre-crops were cultivated, the soil pH was higher and the electrical conductivity was lower than in the rice pre-cropped soil. In addition, the available phosphate (Av. P₂O₅), and contents of Ca²⁺ and Mg²⁺ were higher than in the rice pre-cropped soil. Winter wheat growth characteristics such as culm length, spike length, number of spikes and grains were generally favorable in the black soybean pre-cropped soil. However, the grain yield of winter wheat increased in the black soybean, sesame, and perilla pre-cropped soils by 100 kg/10a or more than in the rice pre-cropped soil. Furthermore, protein content and SDS-sedimentation value of the flour were higher, while amylose content was slightly lower, in the black soybean, sesame, and perilla pre-cropped soils than in rice pre-cropped soil. These results suggest that cultivation of rice alternative crops such as sesame, black soybean, and perilla as pre-crops in paddy soil could improve the physical and chemical properties of the soil and contribute to producing high-quality wheat flour more advantageous for the baking process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.15-26
• /
• 1994

To understand the relative contribution of varietal and environmental variation on various grain quality components in rice, grain appearance, milling recovery, several physicochemical properties of rice grain and texture or palatability of cooked rice for milled rice materials of seven cultivars(five japonica & two Tongil-type), produced at six locations of the middle and southern plain area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal variations were detected in all grain quality components of the rice materials and marked locational variations with about 14-54% portion of total variation were recognized in grain appearance, milling recovery, alkali digestibility, protein content, K /Mg ratio, gelatinization temperature, breakdown and setback viscosities. Variations of variety x location interaction were especially large in overall palatability score of cooked rice and consistency or set- back viscosities of amylograph. Tongil-type cultivars showed poor marketing quality, lower milling recovery, slightly lower alkali digestibility and amylose content, a little higher protein content and K /Mg ratio, relatively higher peak, breakdown and consistency viscosities, significantly lower setback viscosity, and more undesirable palatability of cooked rice compared with japonica rices. The japonica rice varieties possessing good palatability of cooked rice were slightly low in protein content and a little high in K /Mg ratio and stickiness /hardness ratio of cooked rice. Rice 1000-kernel weight was significantly heavier in rice materials produced in Iri lowland compared with other locations. Milling recovery from rough to brown rice and ripening quality were lowest in Milyang late-planted rice while highest in Iri lowland and Gyehwa reclaimed-land rice. Amylose content of milled rice was about 1% lower in Gyehwa rice compared with other locations. Protein content of polished rice was about 1% lower in rice materials of middle plain area than those of southern plain regions. K/Mg ratio of milled rice was lowest in Iri rice while highest in Milyang rice. Alkali digestibility was highest in Milyang rice while lowest in Honam plain rice, but the temperature of gelatinization initiation of rice flour in amylograph was lowest in Suwon and Iri rices while highest in Milyang rice. Breakdown viscosity was lowest in Milyang rice and next lower in Ichon lowland rice while highest in Gyehwa and Iri rices, and setback viscosity was the contrary tendency. The stickiness/hardness ratio of cooked rice was slightly lower in southern-plain rices than in middle-plain ones, and the palatability of cooked rice was best in Namyang reclaimed-land rice and next better with the order of Suwon$\geq$Iri$\geq$Ichon$\geq$Gyehwa$\geq$Milyang rices. The rice materials can be classified genotypically into two ecotypes of japonica and Tongil-type rice groups, and environmentally into three regions of Milyang, middle and Honam lowland by the distribution on the plane of 1st and 2nd principal components contracted from eleven grain quality properties closely associated with palatability of cooked rice by principal component analysis.