• Journal of the Korean Applied Science and Technology
• /
• v.19 no.2
• /
• pp.117-122
• /
• 2002

A silicone softner (SS-5), a permanent press (PP) finish, was prepared by blending silicone oil KF-96 (as a lubricating component) and beef tallow hardened oil (as a softening component) which was synthesized from fatty polyamide salts. The prepared SS-5 and the PP finishing resin were applied to PP finishing cotton cloth and P/C gingham sample by one-bath method. The properties such as crease recovery, tear strength, and bending resistance were tested. The samples treated with SS-5 and PP finishing resin showed improved properties when comparing with the untreated ones, with the ones treated only with PP finishing resin, with ones treated with commercial PP finishing softners and PP finishing resin. The grades of fabric samples treated with 3% SS-5 were fifth grade in the bending resistance test.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.1-12
• /
• 2017

In this study, It was purpose to provide preliminary data for extension of the applicability of deep corrugated steel plate composite members by steel grade and shear reinforcement method. From the result of flexural test on deep corrugated plates composite members using GR40 and SS590, positive moment capacity was increased about 28% by SS590 steel. But to change steel grade was proved to have insignificant effects for increasement of negative moment capacity. In the moment test result of same overlapping length, Increasement rate of positive and negative moment capacity was not significantly improved by increasing the number of bolt. It was estimated to be due to the characteristics of bolt connection such as distance between centers of bolts, edge distance of bolt. In the test result on the spacing of shear reinforcement, positive moment capacity was increased and deformation of negative moment was reduced as the distance decrease. In the test result on the shape of shear reinforcement, positive and negative moment resistance was increased about 2% ~ 7% by U shaped shear reinforcement. In conclusion It was estimated that moment capacity of deep corrugated steel plate composite members are depend on steel grade of deep corrugated steel plate, spacing of shear reinforcement and reinforcing bar.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.96-102
• /
• 2019

When GGBFS(Ground Granulated Blast Furnace Slag) with high blaine is incorporated in concrete, compressive strength in the initial period is improved, but several engineering problems arise such as heat of hydration and quality control. In this paper, compressive strength and durability performance of concrete with 3,000 Grade-low fineness slag are evaluated. Three conditions of concrete mixtures are considered considering workability, and the related durability tests are performed. Although the strength of concrete with 3,000 Grade slag is slightly lower than the OPC(Ordinary Portland Cement) concrete at the age of 28 days, but insignificant difference is observed in long-term compressive strength due to latent hydration activity. The durability performances in concrete with low fineness slag show that the resistances to carbonation and freezing/thawing action are slightly higher than those of concrete with high fineness slag, since reduced unit water content is considered in 3,000 Grade slag mixture. For the long-term age, the chloride diffusion coefficient of the 3000-grade slag mixture is reduced to 20% compared to the OPC mixture, and the excellent chloride resistance are evaluated. Compared with concrete with OPC and high fineness GGBFS, concrete with lower fineness GGBFS can keep reasonable workability and durability performance with reduced water content.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.12
• /
• pp.165-172
• /
• 2019

The aim of the research is to evaluate the influence of various replacing ratios of supplementary cementitious materials(SCMs) such as fly ash(FA), blast furnace slag(BS), and both FA and BS on general properties including segregation resistance as a powder based high fluidity concrete of normal strength grade with water-to-cement ratio 0.40. Specifically, by replacing the SCMs with low density powders, it was assessed that the decreased segregation resistance due to the decreased viscosity by J-ring test. As a result of the experiment, from the general test, the mixtures with SCMs showed increased segregation resistance by increased viscosity as the references, while some segregation was shown from J-ring test due to the decreased density of fresh state mixture related with the capacity of delivering coarse aggregate.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.24 no.1
• /
• pp.54-64
• /
• 2021

Purpose: Nonalcoholic fatty liver disease (NAFLD) is the most frequent cause of chronic liver diseases in both adults and children with obesity. The aim of this study was to compare the changes in liver enzymes and metabolic profile in adolescents with fatty liver following selected school-based exercise (SBE) and high-intensity interval training (HIIT) interventions. Methods: In a semi-experimental study, 34 obese male adolescents with clinically defined NAFLD were divided into the HIIT (n=11, age=12.81±1.02 years, body mass index [BMI]=26.68±2.32 kg/㎡), selected SBE (n=11, age=13.39±0.95 years, BMI=26.47±1.74 kg/㎡), and control (n=12, age=13.14±1.49 years, BMI=26.45±2.21 kg/㎡) groups. The ultrasonography NAFLD grade, peak oxygen uptake (VO2peak), lipid profile, insulin resistance, and alanine aminotransferase (ALT) and aspartate aminotransferase (AST) levels of the participants were measured before and after the exercise interventions. Results: The BMI, waist-to-hip ratio, and body fat percentage of the participants decreased, and a significant increase in VO2peak was observed after the intervention; however, the HIIT group showed a significant improvement compared with the SBE group (p<0.01). Significant reductions were observed in the levels of insulin resistance, triglyceride, total cholesterol, ALT, and AST in both groups, although high-density lipoprotein levels decreased only in the HIIT group (p<0.01). Further, a significant reduction in low-density lipoprotein level was observed in the training groups (p<0.01), but this decrease was not significant compared with the control group (p>0.01). Conclusion: HIIT and SBE are equally effective in improving health parameters in obese children and adolescents.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.3
• /
• pp.323-327
• /
• 2024

The low-temperature coefficient of resistance (TCR) is a crucial factor in the development of space-grade resistors for temperature stability. Consequently, extensive research is underway to achieve zero TCR. In this study, resistors were deposited by co-sputtering nickel-chromium-based composite compositions, metals showing positive TCR, with SiO₂, introducing negative TCR components. It was observed that achieving zero TCR is feasible by adjusting the proportion of negative TCR components in the deposited thin film resistors within certain compositions. Additionally, the correlation between TCR and deposition conditions, such as sputtering power, Ar pressure, and surface roughness, was investigated. We anticipate that these findings will contribute to the study of resistors with very low TCR, thereby enhancing the reliability of space-level resistors operating under high temperatures.

• Journal of Biomedical Engineering Research
• /
• v.25 no.2
• /
• pp.157-163
• /
• 2004

Nitrogen ion implantation and ion plating techniques were applied for improvement of the wear resistance of metallic implant materials. In this work, the wear dissolution behaviour of a nitrogen ion implanted super stainless steel (S.S.S, 22Cr-20Ni-6Mo-0.25N) was compared with those of S.S.S, 316L SS and TiN coated 316L SS. The amounts of Cr and Ni ions worn-out from the specimens were Investigated using an electrothermal atomic absorption spectrometry. Furthermore, the Ti(Grade 2) disks were coated with TiN, ZrN and TiCN by use of low temperature arc vapor deposition and the wear resistance of the coating layers was compared with that of titanium. The chemical compositions of the nitrogen ion implanted and nitride coated layers were examined with a scanting auger electron spectroscopy. It wat observed that the metal ions released from the nitrogen ion implanted S.S.S surface were significantly reduced. From the results obtained, it was shown that the nitrogen ion implanted zone obtained with 100 KeV ion energy was easily removed within 200,000 revolutions from a wear dissolution testing under a similar load condition when applied to artificial hip joint. The remarkable improvement in wear resistance weir confirmed by the nitrides coated Ti materials and the wear properties differ greatly according to the chemical composition of the coating layers. for specimens with the same coating thickness of about 3$\mu\textrm{m}$, TiCN coated Ti showed the highest wear resistance. However, after removing the coating layers, the wear rates of all nitrides coated Ti reverted to their normal rates of below 10,000 revolutions from Ti-disk-on-disk wear testing under the same load condition. From the results obtained, it is suggested that the insufficient depth of the 100 Kel N$\^$＋/ ion implanted zone and of the nitrides coated layers of 3$\mu\textrm{m}$ are subject to restriction when used as frictional parts of load bearing implants.

• Clinical and Experimental Pediatrics
• /
• v.62 no.12
• /
• pp.450-455
• /
• 2019

Background: Lipid accumulation product (LAP) is associated with the presence and severity of nonalcoholic fatty liver disease (NAFLD) in adults. Purpose: Here we evaluated the ability of LAP to predict NAFLD in obese children. Methods: Eighty obese children (38 girls; age 6-18 years) were included. Anthropometric measurements and biochemical values were obtained from the patients' medical records. LAP was calculated as [waist circumference (WC) (cm) - 58]×triglycerides (mmol/L) in girls; [WC (cm) - 65]×triglycerides (mmol/L) in boys. The minLAP and adjLAP were described (3% and 50% of WC values, respectively) and the total/high-density lipoprotein cholesterol index (TC/HDL-C) was calculated. NAFLD was observed on ultrasound, and patients were divided into 3 groups by steatosis grade (normal, grade 0; mild, grade 1; moderate-severe, grade 2-3). The area under the curve (AUC) and appropriate index cutoff points were calculated by receiver operator characteristic analysis. Results: LAP was positively correlated with puberty stage (rho=0.409; P<0.001), fasting insulin (rho= 0.507; P<0.001), homeostasis model assessment of insulin resistance (rho=0.470; P<0.001), uric acid (rho=0.522; P<0.001), and TC/HDL-C (rho=0.494; P<0.001) and negatively correlated with HDL-C (rho=-3.833; P<0.001). LAP values could be used to diagnose hepatosteatosis (AUC=0.698; P=0.002). The LAP, adjLAP, and minLAP cutoff values were 42.7 (P=0.002), 40.05 (P=0.003), and 53.47 (P= 0.08), respectively. For LAP, the differences between the normal and mild groups (P=0.035) and the normal and moderate-severe groups were statistically significant (P=0.037), whereas the difference between the mild and moderate-severe groups was not (P>0.005). There was a statistically significant difference between the normal and mild groups for adjLAP (P=0.043) but not between the other groups (P>0.005). There was no significant intergroup difference in minLAP (P>0.005). Conclusion: LAP is a powerful and easy tool to predict NAFLD in childhood. If LAP is ≥42.7, NAFLD should be suspected. This is the first study to assess LAP diagnostic accuracy for childhood obesity.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.399-407
• /
• 2020

The aim of the research is to provide the boundary conditions for segregation of normal strength grade and high fluidity concrete mixture (so called mid-fluidity concrete) with rheology parameters. Since the normal strength grade concrete mixture has a relatively high water-to-cement ratio and no SCMs, it is easy to be segregated when superplasticizer is added. Hence, to achieve the mid-fluidity concrete of normal strength grade and high fluidity, preventing segregation of the mixture is inevitable. In this research, using two superplasticizers with different solid concentrations, the flow behaviors and rheological behaviors were assessed by increasing fluidity until the segregation happened. According to the experiment in this research, an unusual behavior in rheology parameters was observed when the concrete mixture started to be segregated. From this results and report, it is expected to contribute on the definition of segregation with rheological test methods.

• Korean Journal of Child Studies
• /
• v.24 no.3
• /
• pp.1-13
• /
• 2003

The present study examined gender differences between science-gifted students and general students in creative thinking, personality, environment and performance in science. Subjects were 171 eighth grade students, 66 gifted in science and 105 general students. Data were analyzed by ANOVA and Stepwise Multiple Regression. Sex differences between the science-gifted and general students were found only in several subcategories of the dependent variables. The most critical predictors of creative performance in science were the title abstraction factor in gifted boys and general girls, and the resistance of enclosing factor in general boys.