• 한국동물학회지
• /
• 제16권2호
• /
• pp.97-108
• /
• 1973

한국산 담수어류 4종(잉어과)에 대한 염색체 및 DNA 상대량을 조사하여 아래와 같은 결과를 얻어 이들의 세포유전학적 특징을 계통학적인 면에서 고찰하였다. 1) 참마자(Hemibarbus longirostris) 및 누치 (H. labeo)의 염색체수는 2n=50으로써 그중 참마자는 7쌍의 metacentric (A그룹), 14쌍의 submeta와 subtelocentric(B 그룹) 그리고 acro 내지 telocentric 염색체(C그룹) 4쌍으로 구성되며 arm수 (AN)는 92였다. 누치의 핵형은 A, B 및 C 그룹이 각각 9, 11 그리고 5쌍으로써 AN은 90이된다. 2) 버들개(Moroco lagowskii) 및 버들치 (M. oxycephalus)의 염색체수는 역시 2n=50이었으며, 이들의 핵형도 다같이 A그룹이 6쌍, B그룹이 14쌍 그리고 5쌍의 C그룹으로 이루어져 있으며 AN은 90이었다. 3) 4종의 DNA상대량은 모두 붕어의 약 60%에 해당하였다.

• 폴리머
• /
• 제26권5호
• /
• pp.634-643
• /
• 2002

고분자 주사슬에 벤젠과 sulfonyloxvimide moiety를 가지고 있는 polyamic acid 초박막을 LB 기법을 이용하여 제조한 다음 200 $^{\circ}C$에서 1시간 동안 열처리에 의해 감광성 폴리이미드 LB 필름을 얻었다. Polyamic acid는 THF-pyridine 공용매를 가지고 축중합에 의해 합성하였다. 모든 단량체와 고분자는 원소분석, FT-IR, $^1$H-NMR의 분광학적 측정을 통해 정량 정성분석을 행하였다. UV lithography 방법을 사용하여 금 기판 위에 제조한 감광성 폴리이미드 LB 필름의 마이크로 어레이 패턴을 제조하였다. 형성된 마이크로 어레이 패턴을 따라 두 가지의 자기조립 방법으로 단백질 cytochrome c 단분자 막을 고정화시켰다. 자기조립된 cytochrome c 단분자 막의 물리ㆍ전기 화학적 특성은 cyclic voltammetry와 AFM을 통해 조사하였으며 생물전자소자로의 응용 가능성에 대해서도 검토하였다.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2187-2193
• /
• 2002

We present a novel method for 3D microfabrication with LIGA process that utilizes a deep X-ray mask in which a micro-actuator is integrated. The integrated micro-actuator oscillates the X-ray absorber, which is formed on the shuttle mass of the micro-actuator, during X-ray exposures to modify the absorbed dose profile in X-ray resist, typically PMMA. 3D PMMA microstructures according to the modulated dose contour are revealed after GG development. An X-ray mask with integrated comb drive actuator is fabricated using deep reactive ion etching, absorber electroplating, and bulk micromachining with silicon-on-insulator (SOI) wafer. 1mm $\times$ 1 mm, 20 $\mu$m thick silicon shuttle mass as a mask blank is supported by four 1 mm long suspension beams and is driven by the comb electrodes. A 10 $\mu$m thick, 50 $\mu$m line and spaced gold absorber pattern is electroplated on the shuttle mass before the release step. The fundamental frequency and amplitude are around 3.6 kHz and 20 $\mu$m, respectively, for a do bias of 100 V and an ac bias of 20 $V_{p-p}$ (peak-peak). Fabricated PMMA microstructure shows 15.4 $\mu$m deep, S-shaped cross section in the case of 1.6 kJ $cm^{-3}$ surface dose and GG development at 35$^{\circ}C$ for 40 minutes.

• Applied Microscopy
• /
• 제37권4호
• /
• pp.249-258
• /
• 2007

이자섬은 이자를 구성하는 외분비조직에 둘러싸여 존재하는 내분비세포의 집단으로, 이자섬에서 분비되는 인슐린은 $\beta$세포에서 분비되는 호르몬이며, 세포질의 리보좀에서 합성되고 골지체를 경유하여 세포질로 방출되는 기작을 가지고 있다. 충분한 양의 이자섬 이식은 인슐린 의존형 당뇨병인 제1형 당뇨병에서 정상혈당을 회복시키고, 당뇨 합병증을 방지할 수 있는 치료방법으로 사용되고 있다. 하지만 당뇨병 환자에게 이식을 위한 이자섬의 양에 비해 공여자로부터 증여된 이자섬의 양은 제한적이다. 이러한 문제점은 이자섬의 증식으로 연구되고 있으나, 배양된 이자섬이 정상 조직내의 이자섬과 형태적 기능적으로 동일한 것인지에 관한 연구는 미비하였다. 따라서 본 연구에서는 분리된 이자섬과 배양된 이자섬을 구성하는 세포들의 내부구조의 변화를 주사전자현미경, 투과전자현미경을 이용하여 세포의 미세구조를 확인하고, 인슐린 항체를 이용한 $\beta$세포 내의 인슐린 분포양상을 확인하여 다음과 같은 결과를 얻었다. 분리된 이자섬의 $\beta$세포는 일반적인 핵 미토콘드리아, 세포질세망 그리고 인슐린 과립이 분포하고, 배양된 이자섬 $\beta$세포의 경우 분리된 이자섬에 비하여 일반적인 핵의 모습과 부피가 증가한 세포질과 미토콘드리아, 세포질세망 그리고 골지체의 발달이 이루어지는 것으로 관찰되었다. 인슐린 과립의 경우 분리된 이자섬에 비해 감소하며, 세포막 주위에 분포하는 것으로 관찰되었다. 배양된 이자섬에서 관찰되는 인슐린 과립 분포의 변화, 세포질세망의 증가, 골지체의 발달은 배양된 이자섬 $\beta$세포의 인슐린 생성 분비 기능의 향상과 부피의 증가가 이루어지기 위한 세포 내부의 형태적 변화가 이루어지는 것으로 추측된다.

• 대한소아치과학회지
• /
• 제39권2호
• /
• pp.206-225
• /
• 2012

General status of pediatric dentistry in Korea is to conduct vigorous academic activities and specialized medical care centering the Korean Association of Pediatric Dentistry (KAPD) that has about 1,000 pediatric dentists as members, pediatric dentistry departments of 11 Colleges of Dentistry, numbers of pediatric dentistry training institutions and private clinics specialized in children. From 1996, the accredited pediatric dentists were produced by the KAPD and from 2008, the state began to produce the accredited pediatric dentists. Since then, doctors with expertise in pediatric care had opened private clinics in addition to the university hospitals, it became the basis of a momentum to deepen the specialty of pediatric dentistry. The Dentistry community of Korea is going through rapid and profound changes recently, and the underlying reasons for such changes can be classified largely into a few categories: (1) Decreasing population and structural changes in population (2) Increase in numbers of dentists, (3) Changes in the pattern of dental diseases and (4) Changes in medical environment. In Korea, the children population in the age range of 0 ~ 14 years old had been decreased by 2 million in 2010 compared to that of 2000 due to reduction of birth rate. The current population of children in the age range of 0 ~ 4 years old in 2010 takes up 16.2% of the total population, but it is estimated that such percentage would decrease to 8.0% by 2050. Such percentage is largely behind the estimated mean global population of 19.6% by 2050. On the other hand, the number of dentists had been largely increased from 18,000 in 2000 to 25,000 in 2010. And it is estimated that the number will be increased to 41,000 by 2030. In addition, the specialized personnel of Pediatric dentistry had been shown as increased by 2.5 times during past 10 years. For the changes in the pattern of dental diseases, including dental caries, each df rate of 5 years old children and 12 years old children had been decreased by 21.9% and 16.7% respectively in 2010 compared to 2000. Each df Index also had been decreased by 2.5 teeth and 1.2 teeth respectively. The medical expenditure of Korea is less than that of OECD and more specifically, the expenditure from the National Health Plan is less than OECD but the expenditure covered by households is larger than OECD. These facts indicate that it is considered as requiring the coverage of the national health plan to be reinforced more in the future and as such reinforcement needs continuous promotion. In medical examination pattern of Pediatric dentistry, the preventive and corrective treatment were increased whereas the restorative treatment was decreased. It is considered that such change is caused from decrease of dental caries from activation of the prevention project at national level. For the restorative treatment, the restorations in use of dental amalgam, pre-existing gold crowning and endodontic treatment had been decreased in their proportion while the restorative treatment in use of composite resin had been increased. It is considered that such changes is caused by the change of demands from patients and family or guardians as they desired more aesthetic improvement along with socio-economic growth of Korean society. Due to such changes in dentistry, the pediatric dentistry in Korea also attempts to have changes in the patterns of medical examination as follows; It tends to implement early stage treatment through early diagnosis utilizing various diagnostic tools such as FOTI or QLF. The early stage dental caries so called white spot had been included in the subjects for dental care or management and in order to do so, the medical care guidelines essentially accompanied with remineralization treatment as well as minimally invasive treatment is being generalized gradually. Also, centering the Pediatric dentists, the importance of caries risk assessment is being recognized, in addition that the management of dental caries is being changed from surgical approach to internal medicinal approach. Recently, efforts began to emerge in order to increase the target patients to be managed by dentists and to expand the application scope of Pediatric dentistry along with through such changes. The interest and activities of Pediatric dentists which had been limited to the medical examination room so far, is now being expanded externally, as they put efforts for participating in the preventive policy making process of the community or the state, and to support the political theories. And also opinions are being collected into the direction that the future- oriented strategic political tasks shall be selected and researches as well as presentations on the theoretical rationale of such tasks at the association level.

• 대한치과보철학회지
• /
• 제42권2호
• /
• pp.226-237
• /
• 2004

Purpose: Four finite element models were constructed in the mandible having a single implant fixture connected to the first premolar-shaped superstructure, in order to evaluate how the shape of the fixture and the implant-abutment connection would influence the stress level of the supporting tissues fixtures, and prosthethic components. Material and methods : The superstructures were constructed using UCLA type abutment, ADA type III gold alloy was used to fabricate a crown and then connected to the fixture with an abutment screw. The models BRA, END , FRI, ITI were constructed from the mandible implanted with Branemark, Endopore, Frialit-2, I.T.I. systems respectively. In each model, 150 N of vertical load was placed on the central pit of an occlusal plane and 150 N of $40^{\circ}$ oblique load was placed on the buccal cusp. The displacement and stress distribution in the supporting tissues and the other components were analysed using a 2-dimensional finite element analysis . The maximum stress in each reference area was compared. Results : 1. Under $40^{\circ}$ oblique loading, the maximum stress was larger in the implant, superstructure and supporting tissue, compared to the stress pattern under vertical loading. 2. In the implant, prosthesis and supporting tissue, the maximum stress was smaller with the internal connection type (FRI) and the morse taper type (ITI) when compared to that of the external connection type (BRA & END). 3. In the superstructure and implant/abutment interface, the maximum stress was smaller with the internal connection type (FRI) and the morse taper type (ITI) when compared to that of the external connection type (BRA & END). 4. In the implant fixture, the maximum stress was smaller with the internal connection type (FRI) and the morse taper type (ITI) when compared to that of the external connection type (BRA & END). 5 The stress was more evenly distributed in the bone/implant interface through the FRI of trapezoidal step design. Especially Under $40^{\circ}$ oblique loading, The maximum stress was smallest in the bone/implant interface. 6. In the implant and superstructure and supporting tissue, the maximum stress occured at the crown loading point through the ITI. Conclusion: The stress distribution of the supporting tissue was affected by shape of a fixture and implant-abutment connection. The magnitude of maximum stress was reduced with the internal connection type (FRI) and the morse taper type (ITI) in the implant, prosthesis and supporting tissue. Trapezoidal step design of FRI showed evenly distributed the stress at the bone/implant interface.

• 한국광학회지
• /
• 제18권4호
• /
• pp.264-269
• /
• 2007

기존 필라멘트 방식의 루미나리에용 조명의 단점을 극복하기 위해 필라멘트를 LED로 바꾸기 위한 연구가 활발하게 진행 중이다. 본 연구는 루미나리에용에 적합한 LED패키지 구조를 만들기 위해 ray tracing simulator를 이용해 다양한 구조를 모델링하고 시뮬레이션을 통해 각 구조에서의 배광분포를 측정하였다. 시뮬레이션 결과, LED 패키지의 내부 반사경의 각을 증가시킬수록 배광분포가 두 개의 피크로 갈라지면서 피크간의 각이 점점 커졌다. 또한 외부 반사경 각이 증가함에 따라 양쪽 피크간의 각이 점점 줄어들다가 $50^{\circ}$를 기준으로 다시 증가하였다. 이러한 결과는 LED에서 발생한 빛이 두 개의 반사경에 의하여 반사되는 각도가 달라짐에 의하여 발생함을 알 수 있었다. Ray tracing simulator를 이용하여 구한 LED 패키지 구조의 조건을 적용하여 루미나리에용 LED패키지를 제작하였고 배광분포 측정기를 이용해 광 특성을 측정하였으며 시뮬레이션의 결과와 유사한 특성을 얻었다.

• 복식
• /
• 제22권
• /
• pp.205-224
• /
• 1994

It was aimed to study the costume of Koryo dynasty based upon the thirty pictures of Bud-dha to hang on the wall among the existing Buddist paintings. The costume to study were made about 64 years during the King Chung-yol(1286) to the King Chung-jong(1350) which style was mostly related in Won Dynasty. 가) Men's wear ; 1. Hair style and hair dress ; Man tied up a top knot and they put on the hat such as a Kuan Kun and Mo. The young boys binds his hair up one, two, and three knot-s, and tied up with a hair ribbon, A kinds of Kuan-mo were Mine-lu-kuan Yuan-yu-kuan, Nong-kuan, Hae-chi-kuan Pok-du Yun-wha-kuan Yip-mo- and Tu-ku(Helmeto) 2. clothes ; 1) Colour of Koryo King's Mien-ku Kuan costume was not agree with blue and reddish black colour which was used in Yo, Song, Kum and Won Dynasty, however black and greenhish blue colour was agreed with. 2) The king wore T'ung-t'ien-kuan(Yuan-yu-kuan) and the government officials wore Chin-hien-kuan Hae-chi-kuan and Nong-kuan as a court dress. In general the king and the Crown Prince wore a hats which was used in T'ung-t'ien system however sometimes they wore small hats which was cited in literature. 3) Gate guard and upper garment wore colourful costume figured gold colour pattern which was distin-gtive costume system of Koryo. 4) A monk wore big sleeve long skirt big sleeve long jacket long skirt and shoulder scar-f full shoulder scarf or right hand shoulder opened scarf. 5) The Soldiers wore helmet shoulder or scarf pee-back hung-kap, pok-kap, yang-dan-g-kap we-yu-kap kun-kap, and boots and they carried arms. 6) The young boys wore scarf, loin cloth, long skirt, belt neckless, wan-silk, boots and foots wear and wristless. 나) Women's wear ; 1. Hair style and hairs and tied up with a hair ribbon and wore precious ston decorated hair dress wheel shape hair dress pan shaped head dress handkerchif covered hair dress decorated precious stone hair pin silk chippon made of head dress muf-fler shaped hairdress. Boots mocasin hae lee, suk and sandle wored as a shoes depends on the classes. They wore neckless, earing wres-tless and wan-pu-sik. 2. Closthe 1) High rank lade's wore un-kyun attached jacket and jacket sleeves decorated pleats and pleats decorated long skirt apron back apron knot belt, scarf this type is the same with Dang Dynasty five dynasty of china Song, Kum Won, Myung Dynasty and our cos-tume of Poe-hae, and Shilla Dynasty.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.296-296
• /
• 2014

We investigate experimentally and theoretically the splitting of surface plasmon (SP) resonance peaks under TE- and TM-polarized illumination. The SP structure at infrared wavelength is fabricated with a 2-dimensional square periodic array of circular holes penetrating through Au (gold) film. In brief, the processing steps to fabricate the SP structure are as follows. (i) A standard optical lithography was performed to produce to a periodic array of photoresist (PR) circular cylinders. (ii) After the PR pattern, e-beam evaporation was used to deposit a 50-nm thick layer of Au. (iii) A lift-off processing with acetone to remove the PR layer, leading to final structure (pitch, $p=2.2{\mu}m$; aperture size, $d=1.1{\mu}m$) as shown in Fig. 1(a). The transmission is measured using a Nicolet Fourier-transform infrared spectroscopy (FTIR) at the incident angle from $0^{\circ}$ to $36^{\circ}$ with a step of $4^{\circ}$ both in TE and TM polarization. Measured first and second order SP resonances at interface between Au and GaAs exhibit the splitting into two branches under TM-polarized light as shown in Fig. 1(b). However, as the incidence angle under TE polarization is increased, the $1^{st}$ order SP resonance peak blue-shifts slightly while the splitting of $2^{nd}$ order SP resonance peak tends to be larger (not shown here). For the purpose of understanding our experimental results qualitatively, SP resonance peak wavelengths can be calculated from momentum matching condition (black circle depicted in Fig. 2(b)), $k_{sp}=k_{\parallel}{\pm}iG_x{\pm}jG_y$, where $k_{sp}$ is the SP wavevector, $k_{\parallel}$ is the in-plane component of incident light wavevector, i and j are SP coupling order, and G is the grating momentum wavevector. Moreover, for better understanding we performed 3D full field electromagnetic simulations of SP structure using a finite integration technique (CST Microwave Studio). Fig. 1(b) shows an excellent agreement between the experimental, calculated and CST-simulated splitting of SP resonance peaks with various incidence angles under TM-polarized illumination (TE results are not shown here). The simulated z-component electric field (Ez) distribution at incident angle, $4^{\circ}$ and $16^{\circ}$ under TM polarization and at the corresponding SP resonance wavelength is shown in Fig. 1(c). The analysis and comparison of theoretical results with experiment indicates a good agreement of the splitting behavior of the surface plasmon resonance modes at oblique incidence both in TE and TM polarization.

• Restorative Dentistry and Endodontics
• /
• 제18권1호
• /
• pp.38-53
• /
• 1993

The purpose of this study was to observe the resin infiltration pattern into dentin by various dentin bonding agents. Freshley extracted 36 sound human molars were used in this study. They were stored at $4^{\circ}C$ physiologic saline solution before experiment. All the teeth were cross-sectioned to expose dentin below about 3.0mm at the cusp tip and above 2.0mm at the cemento-enamel junction with Crystal Cutter (MC411 D, Maruto Co., Japan), and were made into specimens for this study (Fig. 1). The specimen experimental groups were divided into 9 groups by dentin surface treatment as following procedures: Group I: Treated with Gluma Cleanser followed by Gluma Primer and Sealer Group 2. Treated with Gluma Cleanser followed by Scotch bond 2 Adhesive Group 3: Treated with Gluma Cleanser followed by Tenure Solution A, Band Visar Seal Group 4: Treated with Scotchprep followed by Scotch bond 2 Adhesive Group 5: Treated with Scotchprep followed by Gluma Primer and Sealer Group 6: Treated with Scotch prep followed by Tenure Solution A, Band Visar Seal Group 7: Treated with Tenure Conditioner followed by Tenure Solution A, Band Visar Seal Group 8: Treated with Tenure Conditioner followed by Scotchbond 2 Adhesive Group 9: Treated with Tenure Conditioner followed by Gluma Primer and Sealer 27 specimens of 36 specimens were divided into 9 groups (Group 1-9), and were used for observation of resin tags. Remaining 9 specimens were divided into 3 groups (Group 1,4 and 7), and were used for observation of fractured dentin surfaces. Specimens to observe the resin tag were demineralized with 20% HCl for 14 hours, specimens to observe the fractured dentin surfaces were demineralized with 10% HCl for 3 minutes. All the specimens were gold-coated with Eiko ion coater (Eiko-engineering Co.), and observed under Scanning electron microscope (Hitachi S-2300) at 20 KV. The following results were obtained: 1. In group 1 treated with Gluma Cleanser, Gluma Primer, and Sealer, most resin tags were more than $100{\mu}m$. 2. In group 4 treated with Scotch prep and Scotchbond 2 Adhesive, most resin tags were about $10{\mu}m$. 3. In group 7 treated with Tenure conditioner, Tenure Solution A, B, and Visar Seal, most resin tags were about $10{\mu}m$ but occasionally resin tags were more than $100{\mu}m$. 4. In groups 2,3,5,6,8 and 9, the lengths of resin tags were inconsistent and the amount of resin tags were reduced.