• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.1
• /
• pp.82-93
• /
• 2019

The International Labor Organization (ILO) selected fishing as the most dangerous group of jobs in the world, and it is well known in Korea as a 4D industry. Offshore large purse seine accounts for the largest portion of the fishing industry in the coastal region with high death rate and the accident rate. The repeated disaster rate survey by the Korea Maritime Institute (KMI) shows offshore large purse seiner is the highest at 22.3 percent and coastal gill nets and offshore stow net are following at 12.4 percent and 11.9 percent in order. Therefore, risk factors occurring in offshore large purse seiners were analyzed based on data from the National Federation of Fisheries Cooperatives (NFFC) for three years from 2015 to 2017 and 4M (Man, Machine, Media, Management) 3E (Engineering, Education, Enforcement) techniques were used to provide a safe fishing environment. The number of accidents on offshore large purse seiners each year was more than 150, and the number of accidents on every fishing boats was as high as 17 percent in 2015. If the accident rate and the risk level were divided by insurance, the accident resulting from contact with machinery was the highest, and the risk of a contact with gear was low but frequently occurring. This was caused by collisions and contact with gear in situations where death and disappearance risk are not high, and accident types in situations where death and loss risk are considered to be contact with machinery, falls or other accidents. Through these analysis techniques, the frequency and risk of each type of accident on a offshore large purse seiners can be demonstrated, and it is expected to raise awareness of a safer fishing environment and contribute to the reduction of accidents.

• Journal of Environmental Impact Assessment
• /
• v.28 no.1
• /
• pp.23-34
• /
• 2019

Global warming becomes a serious issue that poses subsidiary issues like a sea level rise or a capricious climate over the world. Because of severe heat-wave of the summer in Korea in 2016, a big attention has been focused on urban heat island since then. Not just about heat-wave itself, many researches have been concentrated on how to adapt in this trendy warming climate and weather in a small scope. A big part of existing studies is mitigating "Urban Heat Island effect" and that is because of huge impervious surface in urban area where highly populated areas do diverse activities. It is a serious problem that this thermal context has a high possibility causing mortality by heat vulnerability. However, there have been many articles of a green infrastructures' cooling impact in summer. This research pays attention to measure cooling effect of a street planting considering urban canyon and type of green infrastructures in neighborhood scale. This quantitative approach was proceeded by ENVI-met simulation with a spatial scope of a commercial block in Seoul, Korea. We found the dense double-row planting is more sensitive to change in temperature than that of the single-row. Among the double-row planting scenarios, shrubs which have narrow space between the plant and the land surface were found to store heat inside during the daytime and prevent emitting heat so as to have a higher temperature at night. The quantifying an amount of vegetated spaces' cooling effect research is expected to contribute to a study of the cost and benefit for the planting scenarios' assessment in the future.

• Journal of Korean Society on Water Environment
• /
• v.35 no.1
• /
• pp.64-71
• /
• 2019

In recent years, carbon dioxide ($CO_2$) bubbles emerged as the most widely applied material with the recycling of sequestrated storage to decrease global warming. Flotation using $CO_2$ as an alternative to air could be effective in overcoming the high power consumption in the dissolved air flotation (DAF) process. The comparison of DAF and DCF system indicated that, the carbon dioxide flotation (DCF) system with pressurized $CO_2$ only requires 1.5 ~ 2.0 atm, while the DAF system requires 3.0 ~ 6.0 atm. In a bid to understand the characteristics of particle separation, the single collector collision (SCC) model was used and a series of simulations were conducted to compare the differences of collision and flotation between $CO_2$ bubbles and air bubbles. In addition, laboratory experiments were sequentially done to verify the simulation results of the SCC model. Based on the simulation results, surfactant injection, which is known to decrease bubble size, cloud improved the collision efficiency of $CO_2$ bubbles similar to that of air bubbles. Furthermore, the results of the flotation experiments showed similar results with the simulation of the SCC model under anionic surfactant injection. The findings led us to conclude that $CO_2$ bubbles can be an alternative to air bubbles and a promising material as a collector to separate particles in the water and wastewater.

• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.843-862
• /
• 2018

Purpose: The purpose of this study was to develop quality innovation techniques specialized for the small and medium-sized businesses. which account for the majority of Korean companies, were having a hard time utilizing the widely recognized quality innovation techniques due to resource constraints. Methods: First, we do review the existing Single PPM and 6 Sigma. And investigate the utilization of these methods including Toyota Production System. Second, we devised a four-step problem-solving methodology based on recent trends in quality innovation such as Simple, Speedy, and Smart. Third, we do survey on frequently used tools for quality innovation. Many opinion leaders including quality consultants and professors answered and gave us valuable comments about our selected quality tools. Finally, we do specify and map tools to each step of PASS. Results: In 2017, 167 companies participated in the quality innovation support business for small businesses according to the Korea Chamber of Commerce & Industry. We conducted performance checks on 167 companies that had completed the "PASS" projects. For the purpose of evaluating improvement performance, the survey was carried out using a structured questionnaire during the field visit of these companies mentioned above. For the reference, 165 out of 167 companies (98.8 % response rate) responded to the questionnaire and conducted performance analysis based on it. According to the survey, 97.6 percent of the respondents were very satisfied with their overall satisfaction with the quality innovation support projects for small and medium sized enterprises in 2017. Also, 93.3 % of the respondents were satisfied with the results of level of the target achievement. As a result, 160 companies (97.0 % of the participating companies) hope to partic ipate in the quality improvement project using "PASS" once again. Conclusion: In this paper, we introduce the new quality innovation methodology, which is named as 'PASS', It could support the long-range business plan of the small and medium-sized businesses to achieve total customer satisfaction resulting in increased market share and improved profit margin. The most small companies can use this "PASS" technique more easily, quickly and most efficiently than their existing known quality innovation techniques such as Six Sigma and Single PPM, etc.

• Journal of the Korean Institute of Gas
• /
• v.23 no.1
• /
• pp.27-35
• /
• 2019

In order to solve the global warming and reduce greenhouse gas emissions, $CO_2$ capture technology was developed by applying oxy-fuel combustion. But there has been such a problem that its economic efficiency is low due to the high price of oxygen gases. ASU is known to be most suitable method to produce large quantity of oxygen, to reduce the oxygen production cost, the efficiency of ASU need to be improved. To improve the efficiency of ASU, exergy analysis can be used. The exergy analysis provides the information of used energy in the process, the location and size of exergy destruction. In this study, the exergy analysis was used for process developing and optimization of large scale ASU. The process simulation of ASU was conducted, the results were used to calculate the exergy. As a result, to reduce the exergy loss in the cold box of ASU, a lower operating pressure process was suggested. It was confirmed the importance of heat leak and heat loss reduction of cold box. Also, the unit process of ASU which requires thermal integration was confirmed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.309-316
• /
• 2019

In this paper, a low-jitter delay-locked loop that compensates for local clock skew is presented. The proposed DLL consists of a phase splitter, a phase detector(PD), a charge pump, a bias generator, a voltage-controlled delay line(VCDL), and a level converter. The VCDL uses self-biased delay cells using current mode logic(CML) to have insensitive characteristics to temperature and supply noises. The phase splitter generates two reference clocks which are used as the differential inputs of the VCDL. The PD uses the only single clock from the phase splitter because the PD in the proposed circuit uses CMOS logic that consumes less power compared to CML. Therefore, the output of the VCDL is also converted to the rail-to-rail signal by the level converter for the PD as well as the local clock distribution circuit. The proposed circuit has been designed with a $0.13-{\mu}m$ CMOS process. A global CLK with a frequency of 1-GHz is externally applied to the circuit. As a result, after about 19 cycles, the proposed DLL is locked at a point that the control voltage is 597.83mV with the jitter of 1.05ps.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.523-530
• /
• 2018

Kyoto Protocol, adopted in 1997, set the obligation to reduce $CO_2$, $CH_4$, $N_2O$, HFCs, PFCs, and $SF_6$ in developed countries during 1st promised period. $SF_6$ has been drawing a lot of attention since the Kyoto Protocol because once it is released into the atmosphere, it not only stays in the atmosphere for more than 3,200 years but also emits 22,800 times stronger global warming potential at the same concentrations as $CO_2$ if remains in the atmosphere for 100 years. This study introduces 12 methods for $SF_6$ of measuring trace. $SF_6$ of trace level in the atmosphere correctly, the measurement method was changed and as a result, when the back flush method was applied to the pre-concentration system that used low-temperature concentration and high-temperature desorption system, which used Carboxen-1000 adsorption trap, the effect was the best.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.9
• /
• pp.189-200
• /
• 2021

Recently, Information and Communication Technology and SMART Phone Technology have been rapidly developed. According to the increase of data use, the era of big data has come. With the approach of non-contact society, QR Codes are becoming inseparable in our lives. In this paper, we are trying to figure out the implications of QR Code research based on Big Data in Korea. The purpose of this study is to first examine the previous studies on "QR Code" and conduct an analysis on keywords by field using Big Data. Second, for data visualization WordCloud analysis and network analysis are performed on "QR Code" frequent keyword. Third, we would like to present the research direction to future researchers regarding "QR Code". In the results, First of all, research trends showed that research is on the rise and that various fields are being utilized. Second, the results of the analysis of frequent keyword resulted in similar results overall, with some differences depending on the field and year. Third, we found that the visualization results according to the frequent keyword were also analyzed in the same way as the frequent keyword analysis results. The practical implications of the theoretical findings are as follows. First, 'QR Code' needs to be studied as a means of information delivery, not as a technical aspect. Second, it can be seen that "QR Code" is developing reflecting social trends or issues. With both theoretical and practical implications, we are trying to provide the strategic ways of QR-code in future.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.550-556
• /
• 2020

Over the past years, the role of ports in the global network of supply chains has becoming increasingly important, not merely as a physical location for loading and unloading goods, but also as an essential center of economic activity where additional value is added to cargo. Due to the overall growing importance of ports, each country has chosen to adopt hub growth as a primary economic strategy. Northeast Asia in particular, due to its high population density, experiences intense competition between its ports. Busan's port, as a result, has used the establishment of Distripark in order to attract high and stable trade volume, and compete more effectively with other ports in the region. This study estimates the unit cost of the logistic process for the all principal cargos handled at Busan New Port, with the findings revealing that unit cost increases gradually starting with chemical products, LME bulk goods, automobile parts, LME containers, general cargoes, and LME inland transportation goods coming in last. Future research will look more closely at all all categories of cargo handled in the Distrpark of Busan New Port, thereby enabling us to better understand the value created by the port, and how to best implement effective trade volume-attraction strategy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.413-419
• /
• 2021

The purpose of this study was to investigate the ability to treat and prevent infection by multiple Gram-negative bacterial pathogens as a last choice option in the treatment of serious infections in clinical settings. The global spread of extended-spectrum 𝛽-lactamases (ESBLs) and/or carbapenemases in microorganisms are of enormous concern to health services because they are often associated with multi-drug resistance which significantly restricts the antibiotic treatment options. In this study, the antimicrobial resistance profiles of bacteria isolated from South Korean market-derived meat samples were determined by the disc diffusion method. PCR was used to detect the presence of antibiotic resistance genes and ESBL producing genes. In total, we tested 181 isolated colonies from 36 market-derived meat samples. Single PCR and DNA sequencing results revealed that genes blaVIM, blaBIC, blaKPC, and blaSIM were present in the bacteria isolated from retail meat. The bacteria in the meat were separately sequenced and based on alignment, four different bacteria were identified. These findings suggest that bacteria found in retail meats are a reservoir for the spreading of ESBL blaVIM, blaBIC, blaKPC, and blaSIM resistance genes and bacteria strains.