• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.174-179
• /
• 2015

Alignments of photo-reactive mesogen were induced using bare glass substrates without a polymer alignment layer. It was found by using polarized FTIR spectroscopy, polarized microscopy, and birefringence measurement experiments that the reactive mesogen could be aligned along the rubbing direction although the glass substrate without an alignment layer was used. The induction mechanism of the rubbed bare glass is ascribed to that polymers from rubbing clothes are coated on the glass substrate along the rubbing direction and lead the alignment of liquid crystals through intermolecular interactions.

• Journal of Information Display
• /
• v.1 no.1
• /
• pp.14-19
• /
• 2000

Due to distinct properties of plastic substrates such as poor thermal resistance, non-rigidness and high thermal expansion, it is difficult to fabricate plastic film LCDs by conventional LCD processes. Poor thermal resistance and high thermal expansion of substrates induced deformation of substrates surface, mismatch of thermal expansion between ITO electrodes and substrates resulted in defects in the ITO electrodes during the high temperature process. Defects of ITO electrodes and non-uniform cell gap caused by non-rigid and flexible properties were also observed in the pressuring process. Based on in these observations, we used a newly developed material and fabrication process to prevent deformation of substrates, defects of electrodes and to maintain uniform cell gap. The maximum temperature of the process is limited up to $110^{\circ}C$ and pressure loaded during the process is five times less than conventional one. With these invented processes and materials, we obtained highly reliable Plastic Film STN LCDs whose electro-optical characteristics are better than or equivalent to those of typical glass LCDs.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.367-372
• /
• 2000

ZnO thin films were deposited on amorphous slide glass and $SiO_2$/Si substrates by Facing Targets Sputtering method with sputtering current 0.1~0.8 A, working pressure 0.5~3 mTorr and substrate temperature R.T~$400^{\circ}C$. When the sputtering current was 0.4 A, working pressure was 0.5 mTorr and substrate temperature was 30$0^{\circ}C$, ${\Delta}{\Theta}_{50}$ value of ZnO/glass and ZnO/$SiO_2$/si thin film was $3.8^{\circ}$ and $2.98^{\circ}$, respectively. In these conditions, we knew that ZnO thin film were deposited with good c-axis orientation on amorphous slide glass by FTS system.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.254-255
• /
• 2002

Optical elements such as small glass lenses or optical fibers can be permanently bonded to substrates using Al inter-layer by applying Pressure and heating. As an example aspherical lens was bonded on a silicon V-groove. The bonding has high shear strength and good thermal cycling stability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1103-1107
• /
• 2005

Single-crystal silicon thin films on glass (SOG) and on fused-quartz (SOQ) were prepared using wafer bonding and hydrogen-induced layer transfer. Thinfilm transistors (TFTs) were subsequently fabricated. The high-temperature processed SOQ TFTs show better device performance than the low-temperature processed SOG TFTs. Tensile and compressive strain was measured respectively on SOQ and SOG. Consistent with the tensile strain, enhanced electron effective mobility was measured on the SOQ TFTs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.39-40
• /
• 2000

STN LCDs on Plastic Film substrates for mobile communication devices have been researched and developed at KETI in KOREA. The Plastic Film substrate is so weak to heat and pressure that its fabrication process is limited to $110^{\circ}C(Tg)$. In order to maintain uniform pressure on Plastic Film substrate we used newly designed jig and fabrication process. Electro-optical characteristics are better than or equivalent to those of typical glass LCD though it is thinner, lighter-weight, and more robust than glass LCD.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.411-411
• /
• 2012

Over the recent years, surface enhanced Raman spectroscopy (SERS) has dramatically grown as a label-free detecting technique with the high level of selectivity and sensitivity. Conventional SERS-active nanostructured layers have been deposited or patterned on rigid substrates such as silicon wafers and glass slides. Such devices fabricated on a flexible platform may offer additional functionalities and potential applications. For example, flexible SERS-active substrates can be integrated into microfluidic diagnostic devices with round-shaped micro-channel, which has large surface area compared to the area of flat SERS-active substrates so that we may anticipate high sensitivity in a conformable device form. We demonstrate fabrication of flexible SERS-active nanostructured substrates based on soft-lithography for simple, low-cost processing. The SERS-active nanostructured substrates are fabricated using conventional Si fabrication process and inkjet printing methods. A Si mold is patterned by photolithography with an average height of 700 nm and an average pitch of 200 nm. Polydimethylsiloxane (PDMS), a mixture of Sylgard 184 elastomer and curing agnet (wt/wt = 10:1), is poured onto the mold that is coated with trichlorosilane for separating the PDMS easily from the mold. Then, the nano-pattern is transferred to the thin PDMS substrates. The soft lithographic methods enable the SERS-active nanostructured substrates to be repeatedly replicated. Silver layer is physically deposited on the PDMS. Then, gold nanoparticle (AuNP) inks are applied on the nanostructured PDMS using inkjet printer (Dimatix DMP 2831) to deposit AuNPs on the substrates. The characteristics of SERS-active substrates are measured; topology is provided by atomic force microscope (AFM, Park Systems XE-100) and Raman spectra are collected by Raman spectroscopy (Horiba LabRAM ARAMIS Spectrometer). We anticipate that the results may open up various possibilities of applying flexible platform to highly sensitive Raman detection.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.975-982
• /
• 2010

In this study, the laser sintering of inkjet-printed silver lines was evaluated. Silver-nanoparticle ink and a drop-ondemand (DOD) inkjet printer were used for printing on glass and polyethylene terephthalate (PET) substrates with various thicknesses. To sinter the printed silver nanoparticles, the silver layer printed on the transparent substrates was irradiated by focused CW laser beams that were incident normal to the substrates; the irradiation was carried out for various beam intensities and for various irradiation times. The electrical conductivity of the laser-sintered silver patterns was measured and compared with the conductivity of silver patterns sintered by using an oven. The increase in the temperature caused by laser irradiation was also calculated on the basis of the laser beam intensity, irradiation time, surface reflectivity, and thermophysical property of the substrate in order to estimate the increase in the electrical conductivity caused by laser sintering.

• Current Photovoltaic Research
• /
• v.4 no.3
• /
• pp.119-123
• /
• 2016

We discussed various cover glass substrates available for photovoltaic (PV) modules, and investigated the fabrication methods of light trapping structures for the efficiency enhancement of PV modules: wet and dry etching or laser and direct patternings. We also introduced the analysis of haze at etched glass surfaces as a function of wavelength and also presented a anti-reflection coating technology for PV module.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.655-657
• /
• 2002

The carbon nanotube emitters for field emission displays were fabricated by screen printing techniques. The pastes for screen printing are composed of organic binders, carbon nanotubes, and some additive materials. Then the pastes were printed on Cr-coated/Ag-printed soda-lime glass substrates. From the I-V characteristics, the turn-on field of SWNT was lower than that of MWNT. The decrease in the mesh size of screen masks resulted in decreasing the turn-on field and increasing the electron emission current. When the carbon nanotubes were mixed with glass frit, glass frit appeared to contribute to the vertically aligning of carbon nanotubes on glass.