• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.1068-1071
• /
• 2002

In this study, first, we show that the furnace process which requires maintaining high temperature is effected grievously by the temperature of surrounding air. Second, an alternative which maintains the relatively constant temperature dispersion surrounding the furnace and at the same time has economical advantages will be proposed.

• 산업경영시스템학회지
• /
• 제30권1호
• /
• pp.96-104
• /
• 2007

Glass melting process is influenced by both control and observation factors, where control factors include quantity and mixing ratio of raw material, the amount of fuel and air in-take. Further observation factors include temperature and pressure at each step of process inside glass melting furnace. Ambient Control is an effective means to eliminate complications from excessive variation among raw materials, or external disturbance from wide fluctuation of environment around equipments. Ambient Control uses both control and observation factors mentioned above. This study suggests an effective Proactive Control System that can enable genuine 4M standardization in glass melting furnace by applying Ambient Control.

• 한국결정성장학회지
• /
• 제22권3호
• /
• pp.152-157
• /
• 2012

본 연구는 알칼리 활성화제로 NaOH와 물유리를 사용하고 리젝트애쉬와 고로슬래그를 혼합하여 지오폴리머를 제조하였다. 리젝트애쉬와 고로슬래그의 치환율과 물유리와 NaOH의 농도에 따른 압축강도를 측정하였다. 압축강도 측정결과로는 알칼리 활성화제로 NaOH 1 wt%, 물유리 3 wt%와 전량 고로슬래그를 사용한 경우 재령 28일차 강도가 38.91 MPa의 성능을 나타내었다. 압축강도 증진의 중요한 요인은 알칼리 활성화제의 비율과 리젝트애쉬와 고로슬래그의 치환율에 의한 것이었다.

• 콘크리트학회논문집
• /
• 제14권3호
• /
• pp.440-448
• /
• 2002

산업의 발달과 더불어 폐유리의 발생량은 점차 증가되고 있다. 콘크리트에 폐유리를 사용할 경우 알칼리 실리카 반응(ASR)에 의한 팽창으로 콘크리트에 균열이 발생하여 성능저하를 일으킬 수 있다. 본 연구에서는 폐유리의 색깔(갈색, 녹색), 입도 및 폐유리로 인해 발생되는 ASR팽창을 저감시키기 위해 산업부산물의 종류(플라이애시, 고로슬래그 미분말)와 혼입율에 따른 ASR팽창과 강도특성을 분석하였다. 또한, 포졸란 재료로서 폐유리 분말의 사용가능성을 분석하였다. 연구결과, 폐유리의 색깔에 관계없이 폐유리의 퍼시멈 입도는 2.5~l.2mm로 나타났으며, 폐유리의 입도가 2.5~l.2 mm보다 작을수록 팽창은 점차 감소하는 것으로 나타났다. 또한, 폐유리에 산업부산물의 혼입은 ASR로 인한 팽창과 강도저하를 억제시키는데 효과적이며, 0.075 mm미만의 폐유리 분말이 포졸란 재료로서 적용이 가능한 것으로 나타났다.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.650-657
• /
• 2012

For the purpose of improving the durability problem, translucent opal glass was fabricated as a substitute for the polycarbonate diffuser of LED lighting. Calcium phosphate was used as an opacifier of opal glass and melted in an electric furnace. The opaque effect was identified according to the change of the cooling procedure. As results, translucent opal glass was obtained by the melting of a batch with a composition of 3.8% calcium phosphate at $1550^{\circ}C$ for 2 hrs and then the cooling of the material in the furnace. For the cooling condition of the glass sample, HTCG (High Temperature Cooled Glass) was found to have better optical properties than LTAG (Low Temperature Annealed Glass). It had excellent optical properties for a diffuser of LED lighting, with no dazzling from direct light due to its high haze value of over 99% and low parallel transmittance value of under 1%. For the thermal properties, it had an expressed thermal expansion coefficient of $5.7{\times}10^{-6}/^{\circ}C$ and a softening point of $876^{\circ}C$; it also had good thermal properties such as good thermal shock resistance and was easy to apply to the general manufacturing process in the forming of glass tubes and bulbs. Therefore, it is concluded that this translucent opal glass can be used as a glass diffuser material for LED lighting with high heat resistance and high durability; this material is suitable as a substitute for polycarbonate diffusers.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.943-944
• /
• 2008

In this paper, image processing technologies was employed to monitor and visualize the conditions of the inside of furnace for glass. In order to capture the images of the furnace under the high temperature environment, specially designed camera system was used. From the experimental results we see that the developed software showed good information about the inside conditions such as a scum line and positions of bubbles.

• 산업경영시스템학회지
• /
• 제29권2호
• /
• pp.92-96
• /
• 2006

Large glass furnaces to produce glass for CRT are housed in huge chambers. It is costly to maintain such a chamber in constant temperature, humidity, and(air) pressure. In this study, first, we show that the process of such a huge furnace, which requires the steady maintenance of high temperature, is badly affected by the ambient temperature of surrounding air. Second, an alternative process which not only maintains the relatively constant temperature dispersion around the furnace, but is also economical will be proposed. We calculate the necessary volume of air inflow in the appendix.

• 공학논문집
• /
• 제3권1호
• /
• pp.199-205
• /
• 1998

유리병을 대량생산하는 자동 병유리 제병공장에서의 배합공정상 가장 큰 문제점은 원료의 대부분을 차지하는 Cullet Quality Control 이다. 판유리조성은 병유리조성과 차이가 크지만, 판유리 파유리의 조성은 거의 일정하고 순수 판유리 파유리만을 얻을 수 있으므로 Cullet Quality Control이 용이하다. 또한 원료가 저가이므로 원가절감을 달성 할 수는 있으나, 판유리 파유리의 사용량을 용출량 대비 25%이상 증가시키면 조성과 점도의 차이로 인하여 로내 유리물의 유동성이 떨어져 용해로 Bottom 온도가 저하되고 유리의 균질성이 나빠진다. 따라서 용해로의 Dead Corner부분의 Devitrification 발생이 증가하게 되고 유리병의 생산효율을 저하시키는 원인이 된다. 이 문제점을 해결하기 위한 실험을 다음의 3가지 방법으로 실시하여 보았다. 즉 연구를 위하여 용융온도를 높이는 방법과 Booster를 사용하는 방법, Bubbler를 사용하는 방법으로 하였다. 그 결과 Booster 사용시 판유리 파유리 혼입율 90%, Bubbler 사용시 혼입율 70%, 용융온도를 $1480^{\circ}C$에서 $1560^{\circ}C$ 증가시 혼입율 60%로 혼입율을 감소시킬 수 있는 결과를 얻었다. 여기서 용융온도를 증가시키는 방법은 용해로 수명단축과 연료비 상승에 문제점이 있으므로 현실적으로 적용이 불가능한 방법이며, Booster 사용방법은 용해로 Bottom 부위의 용융 유리에 열을 가하여 열대류에 의해 유동성을 증진시키므로 유리의 균질화에는 양호 하나 전기에너지 소비가 많은 단점이 있다. Bubbler 사용방법은 압축공기에 의한 물리적인 대류 증진방법으로 균질화 면에서는 Booster보다는 못하나 가장 경제적인 장점이 있는 방법임을 알 수 있었다.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.544-551
• /
• 2006

The sealing technique between a glass tube and a copper heat pipe in an evacuated tube solar collector is studied. In this study two different sealing techniques, such as flame method and furnace firing, are examined. After the sealing of a copper to a glass, the oxidation state of the copper and its bonding morphology were examined by SEM and XRD. Its oxidation was retarded by coating of borate solution on the copper, and $Cu_2O(cuprite)$ turned into CuO(tenorite) with increase in a firing temperature and firing time. Porous structure was found in the oxide layer when CuO formed. The best sealing morphology was observed when the thickness of the oxidation layer was less than $20{\mu}m$. The sealing technique performed in a furnace was promising and the satisfactory result was obtained when the sample was fired at $950^{\circ}C$ for 5 min under $N_2$ atmosphere. Annealing procedure is recommended to remove the stress left at the bonding zone.

• 한국산업융합학회 논문집
• /
• 제10권3호
• /
• pp.179-185
• /
• 2007

Quartz glass are used in semiconductor industries as the reaction furnace, wafer carrier and accessaries. During the process the quartz glass received compression by direct contact with other quartz glass ware and metal as the form of weight itself and vacuum pressure and fatigue by vibrations caused by process. Even as the other ceramic materials quartz glass have high compressive strength but often there happened crack and breakage of quartz glass resulted in a great damage in the process. In this paper investigation will be carried out on fracture behavior of quartz glass under local load to give guideline to prevent unintended fracture of quartz glass.