Browse > Article
http://dx.doi.org/10.6111/JKCGCT.2012.22.3.152

Characteristics of geopolymer based on recycling resources  

Kim, Yoo-Teak (Department of Materials Engineering, Kyonggi University)
Kim, Hyun-Jung (Department of Materials Engineering, Kyonggi University)
Jang, Chang-Sub (Department of Materials Engineering, Kyonggi University)
Publication Information
Journal of the Korean Crystal Growth and Crystal Technology / v.22, no.3, 2012 , pp. 152-157 More about this Journal
Abstract
In this study, geopolymer was prepared with reject ash and blast furnace slag using NaOH as an alkali activator and water glass. The aim of this study was to investigate the compressive strength variation according to the contents of NaOH and water glass and replacement ratio of reject ash (RA) and blast furnace slag (BS). The compressive strength measured after 28 days was 38.91 MPa for the geopolymer which consist of 100 % of BS with 1 wt% NaOH and 3 wt% water glass. The major factor for improving compressive strength was the alkali activator proportion and the replacement ratio of RA and BS.
Keywords
Geopolymer; Reject ash; Blast furnace slag; Alkali activator; Water glass; Sodium hydroxide; Compressive strength;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Z. Yunsheng, S. Wei, C. Qianli and C. Lin, "Synthesis and heavy metal immobilization behaviors of slag based geopolymer", J. Hazard. Mater. 143 (2006) 206.
2 Sindhunata, "A conceptual model of geopolymerisation, PhD thesis", Department of Chemical and Biomolecular Engineering, The University of Melbourne (2006).
3 P. Duxson, J.L. Provis, G.C. Lukey and J.S.J. van Deventer, "The role of inorganic polymer technology in the development of 'Green concrete'", Cem. Concr. Res. 37 (2007) 1590.   DOI   ScienceOn
4 L. Choi and Y.J. Kwon, "Solving direction of the environmetal friendly policy in Korea cement industy". Magazine of the Korea Concrete Institute 18 (2006) 8.
5 K.P. Lee, M.G. Hong, S.S. Lee and H.Y. Song, "Fundamental physical properties of cement composites containing fineness reject ash", J. Kor. Building Construction 11 (2011) 363.   과학기술학회마을   DOI   ScienceOn
6 Y.T. Kim and Y.G. Ryu, "A study on the characteristics of ecological lightweight aggregates containing reject ash from the power plant", J. Kor. Crystal growth 20 (2010) 185.   DOI   ScienceOn
7 UNEP, "Kyoto protocol", UNEP Press (2002) p. 12.
8 Q. Zhao, B. Nair, T. Rahimian and P. Balaguru, "Novel geopolymer based composites with enhanced ductility", J. Mater. Sci. 42 (2007) 3131.   DOI
9 K. Komnitas and D. Zaharaki, "Geopolymerrisation; A review and prospects for the minerals industry", Miner. Eng. 20 (2007) 1261.   DOI   ScienceOn
10 L. Provis, C.Z. Yong, P. Duxson and J.S.J. Van Deventer, "Correlating mechanical and thermal properties of sodium silicate-fly ash geopolymer", J. Mater. Sci. 336 (2009) 57.
11 D. Panias, I.P. Giannopoulou and T. Perraki, "Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers", Colloid Surf. A-physicochem. Eng. Asp. 301 (2007) 246.   DOI   ScienceOn
12 J.L. Bell, P.E. Driemeyer and W.M Kriven, "Formation of ceramics from metakaolin-based geopolymers: Part 1- CS-based geopolymer", J. Am. Ceram. Soc. 92 (2008) 1.
13 J. Davidovits, "Geopolymers and geopolymeric materials", J. Therm. Anal. 35 (1989) 429.   DOI
14 J. Davidovits, "Inorganic polymeric new materials", J. Them. Anal. 37 (1991) 1633.   DOI
15 W.K. Lee, S.G. Son, S.Y. Hong, J.H. Lee, E.Z. Park and Y.D. Kim, "Preparation and its characteristics of inorganic binder with MSWI bottom ash", J. Kor. Soc. Waste Mange. 25 (2008) 9.   과학기술학회마을