• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.4
• /
• pp.550-560
• /
• 1996

Recently, fluidized bed heat exchangers with circulating liquid are widely used in a number of places-chemical, process, food concentration, waste water treatment facilities, etc. In a circulating heat exchanger, solid particles circulate with the liquid, thereby increase the heat transfer and reduce the fouling potential of the heat exchanger. In this study, glass beads were circulated through a vertical tube. The pressure loss and the heat transfer coefficient were measured. At low flow velocities, glass beads enhanced the heat transfer considerably. The enhancement increased as the volume fraction of the glass beads increased. The pressure loss showed a similar trend. From the observed particle behavior near tube wall, a possible explanation of the trend is provided.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.600-603
• /
• 2008

Tire is one of the key components in automobiles. Especially, most vibrations during driving are resulted from the im-balancing of tire-wheel composites. In this study, this problem has been solved by using glass beads as a balancing material. In addition, the glass beads are coated using several materials to reduce the tendency of aggregation of glass beads.

• Conservation Science in Museum
• /
• v.22
• /
• pp.69-84
• /
• 2019

This study investigated the formal characteristics and chemical compositions of eighty beads excavated from a Silla tomb complex at Deokcheon-ri, Uljin in order to reveal the methods of production and the characteristics of the raw materials involved, thereby illuminating characteristics of the relics from each tomb. The beads excavated from these Silla tombs include one curved bead, one tubular bead, and 78 globular beads. Among them, the curved and tubular beads and three globular beads were identified to be made of minerals, and the remaining 75 beads are made of glass. Most of the glass beads are thought to have been produced using the drawing technique. The characteristics of the beads were classified according to their site of excavation. The globular beads from Tomb No. 34 belong to the lead-barium glass and potash glass groups, indicating that these beads were produced at a relatively earlier period in time. The glass beads excavated from the tombs in the northern portion of the complex differ in color and chemical composition from those in the southern portion, which indicates the character that each group of beads had different aspect according to site location. Considering that the excavated beads were mainly from fifth- and sixth-century tombs, it is likely that certain groups of people living around Uljin used and buried beads in their tombs. As the governance of Silla became more centralized in the sixth century, the use of beads for burial purpose appears to have come to an end in this region.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.405-420
• /
• 2020

A convergence research was conducted on glass beads excavated at the ruins of Hapgang-ri, Sejong, using the archeology and conservation approach. The period of appearance of Jugu Towangmyo in the ruins of Hapgang-ri can be estimated to begin in the late 2^nd century; for Jugu Towangmyo No. 15, the period spans from the late 2^nd to early 3^rd century. Form, color, and manufacturing techniques of complete glass beads were examined, and the cross-sections and chemical composition of 16 samples were observed. Based on these analyses, the glass beads were divided into blue, purple, and red colors. The blue-colored beads could be further sub-divided based on their gloss and brightness; in contrast, the red-colored beads were highly uniform with regard to these parameters. Based on the stripe and bubble arrangement on the surface of the glass beads, their drawing technique was identified. Traces of heat treatment or polishing were observed at the ends of the beads. According to their chemical composition, the 16 samples were classified into 3 potash glass and 13 soda glass groups; in the latter, the properties of the stabilizers were divided according to the blue and red bead colors. The stabilizers of the red beads are unique in that they allow the distinction among beads excavated in other areas in South Korea owing to their compositional differences. Colorants in blue- and red-colored beads are cobalt (containing MnO), and copper and iron, respectively.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.51-60
• /
• 2020

This study was carried out to get the optimum conditions for manufacturing high refractive glass beads from waste fluorescent lamp glass. Chemical composition, X-ray diffraction pattern, particle size distribution, refractive index of glass beads, and the effect of air mixing ratio and ejection rate were investigated. The obtained results are as follows. The X-ray diffraction pattern and chemical composition of glass beads made of waste fluorescent glass are similar to common glass except ReO₂ 0.0108 wt%, BaO 0.071 wt%, NiO 0.0039 wt% and CaO 7.8 wt% but 11.7 wt% of common glass. The glass beads made of waste fluorescent lamp glass have the narrower particle size distribution of and the higher refractive index than the glass beads made of common glass. The optimal conditions of kiln operation for manufacturing glass beads from waste fluorescent lamp glass are 20 m/sec of ejection rate, 1.7 of air mixing ratio, and 940℃ of temperature.

• Journal of Conservation Science
• /
• v.20
• /
• pp.105-117
• /
• 2007

This study is examined the beads excavated in the Sacheon Neukdo ruins to investigate the features of archaeological chemistry and to compare those of the same type of beads excavated within the Gyeongsang-do area by means of scientific analysis. The samples have been observed the micro-structures by an optical microscope and SEM and confirmed the physical property by density measurement. Chemical property have been analyzed main components such as flux, stabilizers, and colorants by SEM-EDS. Besides, XRD was used to identified the characteristic materials of beads. The white opaque beads, which was initially estimated as sea-shell beads, confirm as amorphous silica material. The glass beads, which are blue type as a result of compositional analysis, it is revealed potash glass group and LCA(Low-CaO, $Al_2O_3$) system. gB ones are revealed only in LCA-A(LCA-CaO<$Al_2O_3$), while purple blue ones in LCA-B(LCA-CaO>$Al_2O_3$).

• Journal of Korean Society on Water Environment
• /
• v.35 no.2
• /
• pp.115-122
• /
• 2019

The objective of this study was to investigate the sonophysical and sonochemical effects induced by acoustic cavitation in heterogeneous systemin a 28 kHz double-bath reactor using calorimetry, the aluminiumfoil erosion test, and the luminol test. With no glass beads, calorimetric power in the inner vessel increased as much as the outer sonoreactor lost and total calorimetric power was maintained for various liquid height conditions (0.5 ~ 7 cm) in the vessel. Higher calorimetric energy was obtained at higher liquid height conditions. Similar results were obtained when glass beads were placed with various beads heights (0.5 ~ 2.0 cm) and relatively high calorimetric energy was obtained in spite of large attenuation in the glass beads layer. An aluminium foil placed between the bottom of the inner vessel and the glass beads layer was damaged, indicating significant sonophysical effects. Much less damage was detected when the foil was placed above the beads layer due to large attenuation of ultrasound. Sonochemical effects, visualized by sonochemiluminescence (SCL), also decreased significantly when the beads were placed in the vessel. It was established that the optimization of the liquid height above the solid-material layer could enhance the sonophysical and sonochemical effects in the double-bath sonoreactors.

• 보존과학연구
• /
• s.35
• /
• pp.5-23
• /
• 2014

The possibility of non-destructive inspection glass beads for verification. Conduct a comparative analysis of the Chungcheong area with glass beads excavated Age-specific characteristics of the glass beads shall be classified by region. Trace amounts of ingredients such as CaO, $Al_2O_3$ (stabilizer), MgO, the difference is negligible. $SiO_2$ (subjects), $Na_2O$ (flux) analysis and the difference between the values was greater than in the other ingredients. Composition differences occurred rough surface to a non-uniform cross-section analysis is considered. Minimize the error value, such as the surface of carbon-coated Study, there are additional requirements. Produced at the time of the social and cultural characteristics of ancient glass and important archaeological materials, and to inform the process of cultural exchange between each region in the production of glass technology era according to the level of science and technology, arts and crafts, can be identified.

• Journal of Conservation Science
• /
• v.18 s.18
• /
• pp.5-18
• /
• 2006

Dujeong-dong site of Cheonan is known as the site of Baekje period in the first half of the fourth century. This study investigated the visible properties and the chemical composition of the 18 pieces of the glass found in the site, and considered scientific properties and periodic interrelationship of the glass on the basis of the analysis result. The observation of the visible properties and microstructure of ancient glass was performed with both an electron microscope and an optical microscope, and the chemical composition was conducted by way of both quantitative and qualitative analysis using Scanning Electron Microscope(SEM) with Energy Dispersive Spectrometer(EDS). In the analysis result, various chemical composition systems are identified in the glass beads of Dujeong-dong site, such as lead-barium, soda and potash glass, and also different shapes were found such as gold foil glass beads, tubular beads, and round beads. It is estimated that the classification of glass by means of its chemical composition was also closely related to the color of glass.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.117-126
• /
• 2018

PURPOSES : The purpose of this paper is to analyze the change in lane reflection performance through lane washing and sweeping on highway lanes. METHODS : This paper compared and analyzed the changes in lane reflection performance before and after lane washing and sweeping. The research method was as follows. First, we selected four research sites on the Gyeong-bu Highway. Second, the parameters affecting lane reflection performance are classified into luminance, brightness, and number of glass beads. Third, the change in reflection performance was measured after washing /sweeping at the same place after studying 60m of the unwashed/unswept area. Fourth, the measurement results were compared and analyzed before and after lane washing/sweeping. RESULTS : The results of this study are as follows. First, lane washing improved the luminance and brightness by 4.2~21.4% and 1.4~5.1%, respectively, and reduced the number of glass beads per wash by 0.2~1.2%. Second, lane sweeping improved the luminance and brightness by 2.3~8.5% and 0.8~2.3%, respectively, and reduced the number of glass beads per sweep by 0.8~4.9%. CONCLUSIONS : By comparing the results of lane washing and sweeping, it was found that compared to lane sweeping, lane washing improved the luminance and fewer glass beads were dropped.