• 한국전산구조공학회논문집
• /
• 제24권3호
• /
• pp.267-274
• /
• 2011

본 연구에서는 K형 관이음부의 내부에 단일 및 이중 환보강재를 설치할 경우에 발생하는 보강효과를 수치적으로 평가하였다. 지부재에 축하중을 받는 비보강 이음부와 환보강 이음부의 국부적 최대응력을 평가하기 위해 유한요소해석을 수행하였다. 작용하중과 내부 환보강재의 기하학적 형상이 이음부 거동에 미치는 영향을 평가하고 보강효과를 산정하였다. 또한 단일 환보강재와 이중 환보강재를 비교 평가하여 배치에 따른 응력분포 변화 및 응력의 분산효과를 산정하였다. 수치해석 결과로부터 이음부의 보강설계 자료에 활용 가능한 환보강재의 경제적 규격을 제시하였다.

• Advances in aircraft and spacecraft science
• /
• 제7권5호
• /
• pp.441-458
• /
• 2020

Rectangular-to-Ellipse Shape Transition (REST) inlets are a class of inward turning inlets designed for hypersonic flight. The aerodynamic design of REST inlets involves very complex flows and shock-wave patterns. These inlets are used in highly integrated propulsive systems. Often the design of these inlets may require many geometrical constraints at different cross-section. In present work a design approach for hypersonic inward-turning inlets, adapted for REST inlets, is coupled with a multi-objective optimization procedure. The automated procedure iterates on the parametric representation and on the numerical solution of a base flow from which the REST inlet is generated by using streamline tracing and shape transition algorithms. The typical design problem of optimizing the total pressure recovery and mass flow capture of the inlet is solved by the proposed procedure. The accuracy of the optimal solutions found is discussed and the performances of the designed REST inlets are investigated by means of fully 3-D Euler and 3-D RANS analyses.

• Steel and Composite Structures
• /
• 제24권2호
• /
• pp.249-264
• /
• 2017

In this paper free linear vibration of lattice composite conical shells will be investigated. Lattice composite conical shell consists of composite helical ribs and thin outer skin. A smeared method is employed to obtain the variable coefficients of stiffness of conical shell. The ribs are modeled as a beam and in addition to the axial loads, endure shear loads and bending moments. Therefore, theoretical formulations are based on first-order shear deformation theory of shell. For verification of the obtained results, comparison is made with those available in open literature. Also, using FEM software the 3D finite element model of composite lattice conical shell is built and analyzed. Comparing results of analytical and numerical analyses show a good agreement between them. Some special cases as variation of geometric parameters of lattice part, effect of the boundary conditions and influence of the circumferential wave numbers on the natural frequencies of the conical shell are studied. It is concluded, when mass and the geometrical ratio of the composite lattice conical shell do not change, increment the semi vertex angle of cone leads to increase the natural frequencies. Moreover for shell thicknesses greater than a specific value, the presence of the lattice structure has not significant effect on the natural frequencies. The obtained results have novelty and can be used for further and future researches.

• 한국유체기계학회 논문집
• /
• 제10권1호
• /
• pp.56-63
• /
• 2007

Because the mixing efficiency is influenced remarkably by varying the geometrical configurations, the study of flow characteristics inside the mechanical agitator is very important to improve the performances. The draught tube in the agitator makes intermixing between the screw and tube by interrupting radial flow, and it makes circulation region in a mixing chamber. In general, the helical screw agitator with a draught tube (HSA) is proved more efficient to mix than the others. Consequently, such as the shapes of helical screw, number of pitches and the variation of angular velocity are the main parameters for improving the capacity of HSA. And also the suspension of the solid particles in the agitator can be determined these parameters. The rate of solids suspension in the mixing chamber was quantified with a statistical average value, of. Numerical analyses were carried out, using a commercial CFD code, Fluent, to obtain the velocity, pressure and particle distributions under steady, laminar flow and no-slip conditions. Results are graphically depicted with various parameters.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.151-158
• /
• 2002

Automotive engineers involved in a new car project use various CAD systems that are chosen based on work requirements. For example, engineers in Hyundai Motors are using Pro/Designer and Alias fur the style design, but they use CATIA to design parts and assemblies, ANSYS for FEM analysis, and Pro/Engineer to design engines. Because they use different CAD systems, they have difficulties in collaborative design. Data, which contains errors, is transferred between CAD systems. It is difficult to find out such errors in a large CAD model. An evaluation method for CAD models has been developed in this study. This diagnosis tool analyses a STEP or an IGES file generated from a CAD system, and produces a quantitative error report. The tool has been tested with actual data sets. This paper proposes an algorithm that produces mathematical error values of entities of IGES models that have geometrical data, and entities of STEP models that have topological data, and inspects every part off model. To develop this system, we have used the OpenCASCADE kernel, which is an open source kernel developed by Matra Datavision of France.

• 한국항공우주학회지
• /
• 제36권9호
• /
• pp.851-858
• /
• 2008

본 논문에서는 수직방향으로 접은 사각형 멤브레인의 주름 거동을 기하학적 비선형 후좌굴 해석을 사용하여 연구하였다. 멤브레인은 쉘 요소로 모델링 하였고 하중은 멤브레인의 코너에서 대각선 방향으로 가하였다. 해석에는 다양한 각도의 초기 전개각을 가지는 멤브레인을 고려하였고 접힌 자국이 없는 경우에 대해서도 해석을 수행하여 그 결과를 비교하였다. 해석결과 주름은 큰 코너하중이 가해진 지역에서 국부적으로 발생하였는데, 이 국부 주름은 하중 비의 증가에 따라 점차 성장하여 전역 주름으로 발전하였다. 또한 주름의 발생 및 성장 거동은 접힌 자국의 초기 전개각에 좌우되는 경향을 보였다.

• Steel and Composite Structures
• /
• 제10권1호
• /
• pp.1-21
• /
• 2010

As an alternative for conventional structures for tall buildings, a hybrid lateral load resisting structure has been designed, enabling the assembly of tall buildings directly from a truck. It consists of steel frames with discretely connected precast concrete infill panels provided with window openings. Besides the stiffening and strengthening effect of the infill panels on the frame structure, economical benefits may be derived from saving costs on materials and labour, and from reducing construction time. In order to develop design rules for this type of structure, the hybrid infilled frame has recently been subjected to experimental and numerical analyses. Ten full-scale tests were performed on one-storey, one-bay, 3 by 3 m infilled frame structures, having different window opening geometries. Subsequently, the response of the full-scale experiments was simulated with the finite element program DIANA. The finite element simulations were performed taking into account non-linear material characteristics and geometrical non-linearity. The experiments show that discretely connected precast concrete panels provided with a window opening, can significantly improve the performance of steel frames. A comparison between the full-scale experiments and simulations shows that the finite element models enable simulating the elastic and plastic behaviour of the hybrid infilled frame.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권1호
• /
• pp.84-91
• /
• 2011

A finite element analysis for the wing and landing gear of a composite target-drone air vehicle was performed. For the wing analysis, two load cases were considered: a 5g symmetric pull-up and a -1.5g symmetric push-over. For the landing gear analysis, a sinking velocity of 1.4 m/s at a 2g level landing condition was taken into account. MSC/NASTRAN and LS-DYNA were utilized for the static and dynamic analyses, respectively. Finite element results were verified by the static test of a prototype wing under a 6g symmetric pull-up condition. The test showed a 17% larger wing tip deflection than the finite element analysis. This difference is believed to come from the material and geometrical imperfections incurred during the manufacturing process.

• Computers and Concrete
• /
• 제17권1호
• /
• pp.141-156
• /
• 2016

The search for new structural systems capable of associating performance and safety requires deeper knowledge regarding the mechanical behavior of structures subject to different loading conditions. The Strut-and-Tie Model is commonly used to structurally designing some reinforced concrete elements and for the regions where geometrical modifications and stress concentrations are observed, called "regions D". This method allows a better structural behavior representation for strength mechanisms in the concrete structures. Nonetheless, the topological model choice depends on the designer's experience regarding compatibility between internal flux of loads, geometry and boundary/initial conditions. Thus, there is some difficulty in its applications, once the model conception presents some uncertainty. In this context, the present work aims to apply the Strut-and-Tie Model to nonlinear structural elements together with a topological optimization method. The topological optimization method adopted considers the progressive stiffness reduction of finite elements with low stress values. The analyses performed could help the structural designer to better understand structural conceptions, guaranteeing the safety and the reliability in the solution of complex problems involving structural concrete.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 전문대학교육위원 P
• /
• pp.1-3
• /
• 1999

EM (ElectroMagnetic) pump is used for the purpose of transporting liquid sodium coolant with electrical conductivity in the LMR(Liquid Metal Reactor). (In the present study, pilot EM pump has been designed by using of equivalent circuit method which is commonly employed to analyze linear induction machines for the test of removal of residual heat. The length and diameter of the pump have fixed values of 840 mm and 101.6 mm each by taking account of geometrical size of circulation loop for the installation of EM pump. Flowrate versus developing pressure is related from Laithwaite's standard design formula and the characteristic analyses of developing force and efficiency are carried out according to change of input frequency. From the characteristic curve, input frequency of 13 Hz is determined as the design frequency. On the other hand, The annular air gap size of 6.05 mm is selected not to bring about too much hydraulic loss. Resultantly design analysis makes pump have the electrical input of 604 VA and the hydrodynamical capacity of 1.3 bars and 40 l/min.