• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.68-77
• /
• 2009

A single field deinterlacing method, namely interpolation algorithm derived from low resolution (ILR), is presented in this paper. Traditional deinterlacing methods usually employ edge-based interpolation technique within pixel-based estimation. However, edge-based methods are somehow sensitive to noise and intensity variation in the image. Moreover, the methods are not satisfied in deciding the exact edge direction which controls the performance of the interpolation. In order to reduce the sensitivity, the proposed algorithm investigates low-resolution characteristics of the pixel to be interpolated, and applies it to high-resolution image. Simulation results demonstrates that the proposed method gives not only a better objective performance in terms of PSNR results compare to conventional edge-based interpolation methods, but also better subjective image quality.

• Journal of The Korean Astronomical Society
• /
• v.50 no.5
• /
• pp.139-149
• /
• 2017

The Korea Astronomy and Space Science Institute plans to develop a coronagraph in collaboration with National Aeronautics and Space Administration (NASA) and to install it on the International Space Station (ISS). The coronagraph is an externally occulted one-stage coronagraph with a field of view from 3 to 15 solar radii. The observation wavelength is approximately 400 nm, where strong Fraunhofer absorption lines from the photosphere experience thermal broadening and Doppler shift through scattering by coronal electrons. Photometric filter observations around this band enable the estimation of 2D electron temperature and electron velocity distribution in the corona. Together with a high time cadence (<12 min) of corona images used to determine the geometric and kinematic parameters of coronal mass ejections, the coronagraph will yield the spatial distribution of electron density by measuring the polarized brightness. For the purpose of technical demonstration, we intend to observe the total solar eclipse in August 2017 with the filter system and to perform a stratospheric balloon experiment in 2019 with the engineering model of the coronagraph. The coronagraph is planned to be installed on the ISS in 2021 for addressing a number of questions (e.g., coronal heating and solar wind acceleration) that are both fundamental and practically important in the physics of the solar corona and of the heliosphere.

• Journal of Haehwa Medicine
• /
• v.19 no.1
• /
• pp.87-98
• /
• 2010

There are four kinds of diagnosis methods in oriental medicine, and viewing diagnosis(望診) is the most important method among them. There are two ways in viewing diagnosis. These are viewing shape(觀形) and inspecting color(察色). Viewing shape diagnosis includes observation on geometric curve that is made by prominence of bones or lump of flesh, and examination on symmetric disparity and balance of vertical length among three vertical section of face. Inspecting color is literally inspecting several specified region of face. By Viewing shape, we can learn about characteristic physical mechanism of individuals, and basic disposition of reaction from inside and outside infinite stimulations. On the other hand, by inspecting color, we can estimate the very present pathologic and physiologic status of the patient. the estimation is based on principle that inside body changes reveal some reflections on facial skin surface. When you diagnosis patients with inspecting color method, It is important to distinguish color delicately, and to know where to see and what to know from it. The most important and frequently mentioned regions are myong-dang(明堂), eyes(眼) and In-dang(印堂). Myong-dang(明堂) indicates nose. In-dang(印堂) indicates the space between eyebrows. Unlike myong-dang(印堂) and eyes, In-dang(印堂) is occasionally treated as a trivial region then others. But, from research on classical books of facial examination and consideration of it's locational meanings, we've learned In-dang(印堂) is very important in viewing diagnosis, because this region is crossing of the other two regions and this fact means this region expresses the spiritual status as well as physical status in one region.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.3
• /
• pp.513-522
• /
• 2014

Using the assumption that the price of a stock follows a geometric Brownian motion with constant volatility, Black and Scholes (BS) derived a formula that gives the price of a European call option on the stock as a function of the stock price, the strike price, the time to maturity, the risk-free interest rate, the dividend rate paid by the stock, and the volatility of the stock's return. However, implied volatilities of BS method tend to depend on the stock prices and the time to maturity in practice. To address this shortcoming, we estimate the implied volatility function as a function of the strike priceand the time to maturity for data consisting of the daily prices for KOSPI200 call options from January 2007 to May 2009 using support vector regression (SVR), the multiple additive regression trees (MART) algorithm, and ordinary least squaress (OLS) regression. In conclusion, use of MART or SVR in the BS pricing model reduced both RMSE and MAE, compared to the OLS-based BS pricing model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.4
• /
• pp.229-238
• /
• 2017

This study started to deduce a permeability relationship that can consider the geometric features of various porous media under different flow regimes. With reference to the previous works of Kozeny and Carman, the conventional Darcy-Weisbach relation (Darcy's friction flow equation) was reviewed and expanded for porous flow analysis. Based on the capillary model, this relation was transformed to the friction equivalent permeability (FEP) definition. The validity of the FEP definition was confirmed by means of comparison with the Kozeny-Carman equation. Hereby, it was shown that the FEP definition is the generalized form of the Kozeny-Carman equation, which is confined to laminar flow through a circular capillary. In conclusion, the FEP definition as a new permeability estimation method was successfully developed by expanding the Darcy-Weisbach relation for porous flow analyses.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.171-174
• /
• 2006

A large number of service providers in countries all over the world have established GNSS reference station networks in the last years and are using network software today to provide a correction stream to the user as a routine service. In current GNSS network processing, all the geometric related information such as ionospheric free carrier phase ambiguities from all stations and satellites, tropospheric effects, orbit errors, receiver and satellite clock errors are estimated in one centralized Kalman filter. Although this approach provides an optimal solution to the estimation problem, however, the processing time increases cubically with the number of reference stations in the network. Until now one single Personal Computer with Pentium 3.06 GHz CPU can only process data from a network consisting of no more than 50 stations in real time. In order to process data for larger networks in real time and to lower the computational load, a federated filter approach can be considered. The main benefit of this approach is that each local filter runs with reduced number of states and the computation time for the whole system increases only linearly with the number of local sensors, thus significantly reduces the computational load compared to the centralized filter approach. This paper presents the technical aspect and performance analysis of the federated filter approach. Test results show that for a network of 100 reference stations, with the centralized approach, the network processing including ionospheric modeling and network ambiguity fixing needs approximately 60 hours to process 24 hours network data in a 3.06 GHz computer, which means it is impossible to run this network in real time. With the federated filter approach, only less than 1 hour is needed, 66 times faster than the centralized filter approach. The availability and reliability of network processing remain at the same high level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1792-1798
• /
• 2010

Home Gateway is always on for continuous services of home networks. Ubiquitous home networks are extended. so power consumption of home gateways increases by geometric progression. Our algorithm is for home gateway to sleep, listen or wakeup according to network traffic adaptively, as well as to keep always-on service. To do this, it traces the accumulated average of previous sleep periods. In addition to this basic algorithm, we make the profiles for user's living pattern per the day to reflect network usages in detail and adaptively. As the simulation results by comparing with overall accumulated average and per-day accumulated average, in case of the overall accumulated average, the difference the estimation and real value is distributed from 0.43% to 4%. In contrast of this, in case of the per-day accumulated average is distributed from 0.06% to 2%. From this results, we know the profiling of per-day usage pattern can help reduce the difference of the real sleep period and the estimated sleep period.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1131-1135
• /
• 2010

This paper presents a method to capture the posture of the human lower-limbs on the 3D space by using a single camera and a planar mirror. The system estimates the pose of the camera facing the mirror by using four coplanar IR markers attached on the planar mirror. After that, the training space is set up based on the relationship between the mirror and the camera. When a patient steps on the weight board, the system obtains relative position between patients' feet. The markers are attached on the sides of both legs, so that some markers are invisible from the camera due to the self-occlusion. The reflections of the markers on the mirror can partially resolve the above problem with a single camera system. The 3D positions of the markers are estimated by using the geometric information of the camera on the training space. Finally the system estimates and visualizes the posture and motion of the both legs based on the 3D marker positions.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.77-86
• /
• 2013

This paper focuses on the development of analytical models for estimating the changes in saturation flow rates (SFR) at the stop-lines of a signalized intersection due to the existence of nearby work-zones, and thereby calculating the prevailing capacity values for specific lane groups. Major changes were incorporated in the logics of previous models and significant revisions have been made to secure the accuracy and simplicity. Furthermore, much attention was paid to model validation by making comparisons to both extensive simulation results and empirical data from various sites. It was found that SFRs are highly sensitive to the location of work-zones, the distance to each work-zone from the stop-line of a concerned approach, the number of lanes open and closed, and the effective green time. Using such geometric and operating conditions that constitute work-zone environment, the proposed models successfully estimated SFR values with a miniscule margin of error.

• Water for future
• /
• v.14 no.2
• /
• pp.63-69
• /
• 1981

This Study is aimed at optimal sequencing of water supply projects for water demand from the application in water resources field of dynamic programming because a minimum present cost strategy for investment in water supply projects plays an important part of installation of some projects. In analysis, the relationships of the future water demand and numerous possible independent projects that are expected to meet water requirements up to some future data in Daegu city were used and future water demand were estimated from the exponential function method, the method used by the Water Works Bureau of Daegu City government which is a kind of geometric progression method and the mean value of these two methods. The results showed that the optimal sequencing of water supply projects using Dynamic Programming was reasonable and the changing of the estimation method of future water demand made a difference among optimal sequence of projects while the changing of annual rate of interest had influenced on present value cost only. In general, the best sequence for constructing the seven projects was the order of D-E-G-F-C-B-A, with the corresponding period for 33-38 years.