Functional gastrointestinal disorders affect millions of people of all age regardless of race and sex. There are, however, rare diagnostic methods for the functional gastrointestinal disorders because functional disorders show no evidence of organic and physical causes. Our research group identified recently that the gastrointestinal tract well in the patients with the functional gastrointestinal disorders becomes more rigid than healthy people when palpating the abdominal regions overlaying the gastrointestinal tract. The aim is, therefore, to develop a diagnostic method for the functional gastrointestinal disorders based on quantitative measurement of the rigidity of the gastrointestinal tract well using ultrasound technique. For this purpose, a preliminary ultrasound diagnostic system was developed and verified through phantom tests. The system consisted of transmitter, ultrasonic transducer, receiver, TGC, and CPLD, and verified via a phantom test. For the phantom test, ten soft-tissue specimens were harvested from porcine. Five of them were then treated chemically to mimic a rigid condition of gastrointestinal tract well, which was induced by functional gastrointestinal disorders. Additionally, the specimens were tested mechanically to identify if the mimic was reasonable. The customized ultrasound system was finally verified through application to human subjects with/without functional gastrointestinal disorders(Normal and Patient Groups). It was identified from the mechanical test that the chemically treated specimens were more rigid than normalspecimen. This finding was favorably compared with the result obtained from the phantom test. The phantom test also showed that ultrasound system well described the specimen geometric characteristics and detected an alteration in the specimens. The maximum amplitude of the ultrasonic reflective signal in the rigid specimens $(0.2{\pm}0.1Vp-p)$ at the interface between the fat and muscle layers was explicitly higher than that in the normal specimens $(0.1{\pm}0.0Vp-p)$ (p<0.05). Clinical tests using our customized ultrasound system for human subject showed that the maximum amplitudes of the ultrasonic reflective signals nea. to the gastrointestinal tract well for the patient group$(2.6{\pm}0.3Vp-p)$ were generally higher than those in normal group$(0.1{\pm}0.2Vp-p)$ (p<0.05). These results suggest that newly designed diagnostic system based on ultrasound technique may diagnose enough the functional gastrointestinal disorders.
The geometric design of an implant surface may play an important role in affecting early osseointegration. It is well known that the porous surfaced implant had much benefits for the osseointegration and the early stability of implant. However, the porous surfaced implant had weakness from the transgingival contamitants, and it resulted in alveolar bone loss. The other problem identified with porous surface implant is the loss of physical properties resulting from the bead sintering process. In this study, we developed the new bead coating implant to overcome the disadvantages of porous surfaced implant. Ti-6Al-4V beads were supplied from STARMET (USA). The beads were prepared by a plasma rotating electrode process (PREP) and had a nearly spherical shape with a diameter of 75-150 ${\mu}m$. Two types of titanium implants were supplied by KJ Meditech (Korea). One is an external hexa system (External type) and the other is an internal system with threads (Internal type). The implants were pasted with beads using polyvinylalcohol solution as a binder, and then sintered at 1250 $^{\circ}C$ for 2 hours in vacuum of $10^{-5}$ torr. The resulting porous structure was 400-500 ${\mu}m$ thick and consisted of three to four bead layers bonded to each other and the implant. The pore size was in the range of 50-150 ${\mu}m$ and the porosity was 30-40 % in volume. The aim of this study was to evaluate the osseointegration of the newly developed dental implant. The experimental implants (n=16) were inserted in the unilateral femur of 4 mongrel dogs. All animals were killed at 8 weeks after implantation, and samples were harvested for hitological examination. All bead coated porous implants were successfully osseointegrated with peripheral bone. The average bone-implant contact ratios were 84.6 % (External type) and 81.5 % (Internal type). In the modified Goldner's trichrome staining, new generated mature bones were observed at the implant interface at 8 weeks after implantation. Although, further studies are required, we could conclude that the newly developed vacuum sintered Ti-6Al-4V bead coating implant was strong enough to resist the implant insertion force, and it was easily osseointegrated with peripheral bone.
깊은 보의 실제 시공에서는 창호, 배관, 설비 등의 건축적 요구 조건과 각종 제약 조건에 의하여 복부에 개구부를 설치해야하는 경우가 많으며, 이러한 개구부를 갖는 깊은 보에서는 하중 전달 경로가 개구부의 위치와 크기 및 형태 등에 큰 영향을 받게 된다. 이 연구는 양단이 단순지지되어 있는 철근콘크리트 질은 보를 대상으로 하여, 전단경간비와 콘크리트 강도, 복부 보강형태 및 개구부의 위치 등 여러 구조 변수가 깊은 보의 최대 전단내력과 균열 발생 및 진전, 파괴형태 등에 미치는 영향을 실험을 통해 조사하고 이론과 비교하였다 실험 결과, 깊은 보의 거동은 복부의 대각균열 형성과 크게 연관되어 있으며, 전단경간비와 개구부의 영향에 따라 내력이 큰 차이를 보이는 것으로 나타났다. 이론식으로는 Kong의 제안식과 Ray의 제안식이 비교되었으며 개구부의 크기가 커 다소 오차를 보이는 X 계열 시험체를 제외하면 Kong과 Ray의 제안식 모두가 깊은 보의 극한 전단강도를 적절히 예측할 수 있는 것으로 조사되었다.
석조문화재는 설계 도면이 소실된 경우가 많으며 정확한 형태정보가 없어 보존과 원형복원에 큰 어려움이 있다. 최근에 정밀실측과 같이 수치정보를 구축하는 연구가 활발히 진행되고 있지만, 대부분 2차원적으로서 활용도에 한계가 있다. 이를 보완하는 새로운 기법으로 3차원 영상 스캐닝 시스템이 도입되고 있다. 이 연구에서는 대원사다층 석탑을 대상으로 3D 스캐닝을 통하여 3차원 영상분석과 자료를 구축하고 실측도를 작성하였으며, 이를 바탕으로 수평 및 수직 변위를 평가하였다. 부재별 수치를 측정한 결과, 각 방면에서 서로 다른 수치를 보이고 있으며 상하 및 좌우변위가 나타났다. 수평적 상하변위는 좌면과 우면에서 탑신의 상부로 갈수록 컸으며, 수직적 좌우변위는 8층 옥개석이 북서쪽으로 치우쳐 있는 것으로 확인되었다. 이와 같은 변위측정과 평가는 석조문화재의 특성상 불균등한 표면과 프로그램 및 연구자에 따라 약간의 오차는 발생할 수 있다. 앞으로 다양한 실측과 안정성 평가연구가 진행된다면 석조문화재의 원형보존과 훼손상태 파악에 대한 정확한 자료를 제시할 수 있을 것이다.
본 연구에서는 회전교차로를 대상으로 현재의 횡단보도 설계기준에서 벗어나 보행자의 편의와 안전성을 향상시킬 수 있는 대각선횡단보도 설치에 관한 연구를 수행하였다. 대각선횡단보도의 설치는 보행자 편의증진에는 도움이 되지만 차량 통행에 방해요소가 될 수 있다. 따라서 본 연구에서는 회전교차로에 대각선횡단보도를 설치하였을 때 차량의 지체시간 변화에 대한 연구를 통해 합리적인 설치 기준을 제시하였다. 본 연구에서는 회전교차로의 기하구조와 다양한 교통특성 등을 반영하여 분석을 실시하였다. 연구결과 회전교차로에 대각선횡단보도를 설치할 경우 포화도, 보행자수 증가에 따라 차량의 지체시간이 증가하지만 증가율은 경우에 따라 매우 다르게 나타났다. 전체적으로 포화도 0.6이하에서는 보행자수에 관계없이 대각선횡단보도의 설치에 따른 영향이 미소하였으며 보행자수 300인/시 이하에서는 포화도에 관계없이 지체시간의 차이가 매우 작은 것으로 나타났다. 또한, 회전교차로의 내접원 지름이 커짐에 따라 포화도와 보행자수의 증가에 따른 차량 지체시간의 차이가 작아지는 것으로 분석되었다.
The purpose of this study was to analyze and compare the shapes, colors, patterns, and hairstyles of Qipao worn by heroines that were reconstructed over times, in a Chinese TV Drama set in the 1930s and televised in 1980 and remade in 2007. We investigated how the Qipao was reinterpreted. The results were as follows. First, in televised in 1980, Qipao borrowed the characteristics of Jing Pai Qipao, which became popular in Beijing. Jing Pai Qipao was characterized by a roomy and loose silhouette that does not expose a body line, Chinese traditional 5 colors, simple plain patterns and Chinese traditional flower patterns. For hairstyle, twist and permanent wave styles that were popular in the Republican Period were very common. On the other hand, in televised in 2007, Qipao was a Hai Pai style that was very popular in Shanghai in the 1930s. Hai Pai Qipao was characterized by a tight silhouette fitted to the body, various colors such as purple and beige other than the 5 colors, Western flower patterns and modern geometric patterns. Hairstyle was changed from bang hair to a permanent wave. Second, while had a modern reinterpretation of Jing Pai Qipao that was very popular in Beijing, rather than Hai Pai Qipao that became popular in Shanghai in the 1930s, used Hai Pai Qipao that was popular in Shanghai in the 1930s. In particular, demonstrated how the mass media should reinterpret past clothing by thoroughly studying and reflecting Shanghai Qipao in the 1930s and adding viewers' aesthetic taste of 2007 without damaging an original. Moreover, it confirmed that clothing can function as language and symbol within the mass media by connecting the color and pattern of Qipao with characters' traits and the plot. It suggests that was more advanced than filmed in the 1980s. The findings of this study might provide useful data to costume designers who reinterpret costumes from a new angle.
본 연구에서는 비접촉 겹침 이음에 대한 스트럿-타이 모델을 제시하여 유효 겹침 이음 길이(effective lap length, $l_p$)와 이음 강도에 영향을 주는 요인들을 분석하였다. 부착응력이 작용하여 이음 강도에 기여하는 유효 겹침 이음 길이는 전체 겹침 이음 길이보다 짧으며, 이음된 철근에 직각방향으로 배근된 횡보강량비$({\Phi})$와 (이음된 철근간 거리)/(겹침 이음 길이) 비$({\alpha})$의 영향을 받는다. 이음된 철근간 거리가 멀어질수록 동일 겹침 이음 길이에서 유효 겹침 이음 길이는 짧아지게 되어 이음 내력은 작아진다. (이음된 철근간 거리)/(겹침 이음 길이) 비$({\alpha})$가 유효 겹침 이음 길이 결정에 미치는 영향은 횡보강량비$({\Phi})$가 낮을수록 커지게 된다. 이것은 횡보강량비가 낮을수록 이음된 철근 사이에 존재하는 스트럿의 기울기가 커지므로, 이음된 철근 사이 거리가 유효 겹침 이음 길이 결정에 큰 영향을 주기 때문이다. 비접촉 겹침 이음에 대한 제안된 스트럿-타이 모델은 실제 힘의 흐름을 분석할 수 있어, 다양한 재료 및 기하학적 조건에 적합한 철근 상세 설계를 가능하게 한다. 기존 문헌의 실험에서 나타난 거동 특성과 횡보강량이 이음 강도에 미치는 영향을 제안된 스트럿-타이 모델을 이용하여 효과적으로 설명할 수 있으며, 25개 실험체에 대한 이음 강도를 변동계수 11.1% 범위 내에서 적절히 예측할 수 있었다.
The primary goal of this study is to define the future image of modern fashion. By review of many references, this study has examined predictable future in common, various researches on future, and futurism that appeared from art history. This study has also identified the trend of future image and the properties of the image in terms of fashion as well. The purpose of this study is defined as future image of modern fashion. First of all. through a large literature, this study is to examine general future and the study of future, to investigate futurism appears from art history. and to identify the trend of future image and the properties of the image in terms of fashion. The main results of this study include : 1) General future means forthcoming sometime or a state of life at that time, and future is not drawing near naturally in accordance with the passage of time. The future is developed according as which the owners of time have independent meaning and what they select. 2) The futurism had started with the background based on Darwins and Einsteins scientific theories and Bergsons and Nietzsches philosophical thoughts, which was then established by Marinettis Futurism Statement and Dynamism Theory of Umberto Boccionio, Giaomo Balla, Luigi Russolo and Gino Severini. As the purpose of futurism is to represent the dynamism of machinery and the beauty of speed, it has been developed toward op art and kinetic art including video art, laser art, and holography. 3) Fashion style and trend of futurism from the beginning of 20th century up to now can be defined as follows : Firstly futurism fashion represented by loud colors and geometric pattern appeared from 1910s to 1930s in the first place. Secondly, or art fashion and kinetic fashion appeared in 1960s due to the influence of op art and kinetic art which were developmental arts of futurism paintings. Space Look and Cosmo Corps Look that were designed by Andre Courreges, Pierre Cardin, Rudi Gernreich and Paco Rabanne, were also the trend of future image fashion. Thirdly, various materials and techniques developed this future image fashion in 1980s, and Glitter Look and Collage Look were its representative style. Fourthly, in 1990s, human beings dreamed the freedom of mind by human-oriented thought. and created the ecology of new concept mixed with technology due to anxiety on environmental destruction. which influenced on the advent of Zen style.
본 연구는 지하철 역사 공사가 이루어지는 교통량이 많은 광장형 교차로에서의 공사중 처리 방안을 제시하는 것으로 대부분의 지하철 역사는 혼잡한 교차로에서 위치하게 되어 기존의 복공식 교통처리방안으로 할 경우에는 공사로 인한 차선감소와 차선변경으로 인한 차량지체나 사고의 위험성이 많으며 공사가 단계별로 이루어지기 때문에 공사기간도 길어지고 공사비용도 많이 소요된다. 따라서, 본 연구에서는 충분한 공사 작업공간의 확보와 원활한 교통소통을 제공하기 위하여 현대식 로터리에 신호운영을 도입한 방식(SMR)을 사례지점인 두류네거리에 적용하여 기존의 복공식 교통처리방안과 SMR방식에 대한 효율성을 비교${\cdot}$분석하였다. 신호로 운영되는 현대식 로터리(SMR)의 도입은 공사중 교통처리방안이 기존 복공식 교통처리방식과 대등한 교통처리 효과를 나타낼 수 있으면서, 공사를 위한 공간확보 및 공사비, 공사기간 절감 효과를 기대할 수 있는 교통처리방안이다. 본 연구에서 제시된 SMR방식은 기존의 교통처리방식의 문제점인 공사기간과 공사 작업공간 협소, 교통혼잡, 교통소통을 증진시키는 새로운 운영방식으로서 향후 광장형 교차로에서 지하철공사 뿐만 아니라 공사시 교통처리 방안으로서 광범위하게 적용될 수 있다.
확장단부판(extended end-plate) 접합부는 보-기둥 모멘트 접합부의 한 형태로 접합부를 구성하는 단부판(end-plate)의 두께 및 길이, 고장력볼트의 개수 및 직경, 고장력볼트의 게이지 거리, 용접부의 치수 및 길이 등에 따라서 상이한 거동특성과 에너지소산능력을 발현한다. 이러한 확장단부판(extended end-plate)는 미국 및 유럽 등지에서는 다양한 기하학적 형상으로 기둥-보 접합부에 적용되고 있다. 그러나 현재 우리나라에서는 강구조 보-기둥 접합부에 적극적으로 적용되고 있지 못한 상황이다. 이렇게 적용성이 높지 않은 이유로는 기하학적 형상변화에 따른 설계강도식 제안, 에너지소산능력 평가 및 시공지침의 제공이 적절하게 이루어지지 못하고 있기 때문이다. 따라서 이 연구에서는 단부판(end-plate) 두께가 상대적으로 얇은 기하학적 형상을 갖는 비보강 확장단부판(unstiffened extended end-plate) 접합부의 에너지소산능력을 평가하여 에너지소산능력 예측모델을 제안하기 위한 기초자료를 제공하기 위하여 진행하였다. 이를 위하여 비보강 확장단부판(unstiffened extended end-plate) 접합부에 대한 3차원 비선형 유한요소해석을 단부판(end-plate)의 두께를 변수로 하여 수행하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.