• Journal of Embryo Transfer
• /
• v.28 no.4
• /
• pp.315-318
• /
• 2013

This study was conducted to investigate the changes of hormone levels of serum progesterone (P4) and estradiol-$17{\beta}$ (E2) in sows of Landrace (L), Yorkshire (Y) and F1 (L ${\times}$ Y) (respectively n=3) with excellent ability, and to provide a baseline data for improving reproductive performance. In this experiment, the sows at the age of 12 months or more were used. The sows were fed by two way methods, one is conventional methods and the other is 3 days-flushing feed before estrus. Each pig's blood was collected in 3, 6, 9, 12, 15 and 18 days after the estrus for the analyses of P4 and E2. Serum was separated by centrifugation for 15 min. with 3,000 rpm. Progesterone and estradiol-$17{\beta}$ were measured by immunochemical assay (ELIZA test). In conventional feeding, serum progesterone levels were significantly (p<0.01) higher in F1 than in L and Y. No significant differences in P4 concentrations were seen between the L and Y of sows. Serum E2 levels were similar the serum progesterone levels. In the case of flushing feed, the tendency of hormonal changes were similar to conventional methods. But almost of hormonal levels were a little higher than that of conventional methods. P4 level of L and Y in flushing feed were significantly different (p<0.01). Serum E2 level of Y in flushing feed was significantly different among the breeds (p<0.01). These results were similar to the tendency of hormonal changes in general sows and moreover, flushing feed is known to develop the swine production, these results proved the fact of the methods. And these results suggested that more studies about hormonal changes in sows according to seasonal and nutritional factors should be needed.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.4
• /
• pp.477-488
• /
• 2018

Objectives: The purpose of this study was to investigate career competency, tasks, and job satisfaction of public servants, public institutions, and researchers. Methods: The survey was conducted about career competency, job satisfaction, and satisfaction on work life. Next, they interviewed on the characteristics of each job by two or three dimensions. The following conclusions were obtained from July to August 2017. Results: Career competencies were GPA with 3.87, 818 points of TOEIC score, and ITQ certification. Public servants required the information on literacy skills for employment and job performance, while civil servants need more than one year of clinical experience in the dental hospital. The non-commissioned officer needed a written test and fitness training. The health insurance review and assessment center required more than one year of experience from general hospital or medical institutions. Researchers required a research career, language skill, and professors required research and teaching experiences with clinical experience more than three years. The main job tasks were as follows; for public servants, they were official document processing and community projects. For the civilian workers and military/noncommissioned officers, they were medical assistant and administrative works. The employees of the health insurance review and assessment service are examining the medical expenses and the medical examination, the researchers are experimenting, researching and writing articles, and the teaching staff are lecturing and conducting individual research. Conclusions: The results of job satisfaction survey showed that occupational satisfaction was the highest in civil servants, researchers, and teaching professions. Job security was the highest in health workers and health inspectors' evaluation centers, and time vacancy was the highest in civilian workers and military/noncommissioned officers. If you want to work in such an institution, you should prepare elements that match your basic literacy and job specific characteristics. And we should try to increase the satisfaction of work even after work.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.68-75
• /
• 2018

In this study, to solve the problems of the conventional crack repair and injection method, high elasticity latex was used as the material of the storage tube to withstand the high pressure in the center part differently from the general port. When the repair solution was injected into the crack part, The TPS method was developed so that the air existing in the TPS can be discharged. In addition, a new infusion port in which a valve blocking the backflow of the remediation solution was installed at the injection port was developed and the physical characteristics of the port were analyzed. As a result of the evaluation, it was found that the filling rate of the remedial solution was improved compared to the existing ordinary injector method, and the cracks were completely filled in the test conditions. Compressive strength and tensile strength after repair showed about 20% decrease after repair in case of using ordinary injector method, while TPS method showed about 2~7% increase after repair. The results of this study showed that the injection port method using the elastic storage tube increased the injection performance and the quality after repair compared to the conventional injector method. The result of this study is expected to be utilized as the basic data for application and commercialization of the result to the practical structure.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.136-142
• /
• 2008

We conducted this study to compare physiological response according to growing conditions between superior and inferior family of Pinus densiflora. In 1981, open-pollinated (OP) progenies of P. densiflora were planted in Chuncheon (CC) and Naju (NJ). We selected KW2 as a superior family and KW23 as a inferior family based on volume index among 30 OP progenies. We calculated general combining ability of each 30 OP progenies in each sites, and compared family growth rank. We collected needles of selected families in CC and NJ, and analyzed chlorophyll content, nitrated reductase (NR) activity, nitrogen content, and superoxide dismutase (SOD) acitivity. In CC, chlorophyll content and nitrogen content were more in needles of KW2 than those of KW23. In NJ, KW2 showed higher NR activity than KW23, and according to site, families in CC showed higher NR activity than those in NJ. SOD activities of both families were higher in NJ, and KW23 showed higher activity than KW2 in both sites. Consequently, inconsistency of the growth performance of two families was caused by different genetic and physiological responses.

• Journal of dental hygiene science
• /
• v.18 no.6
• /
• pp.374-379
• /
• 2018

This study attempted to identify factors work environment that affect job satisfaction in dental hygienists. This study was conducted between August 29 and September 28, 2017, as part of an in-depth study of the 'Survey on the Working Environment of Clinical Dental Hygienists' of the Korean Dental Hygienists Association. To get the responses, the questionnaire was posted on the website of the Korean Dental Hygienists Association, and of the respondents, 4,663 were selected and analyzed. An independent t-test and one way ANOVA analysis were used to make a comparison of job satisfaction according to the general characteristics, salary, and tasks. Logistic regression analysis was conducted to identify factors affecting job satisfaction. The significance level was 0.05. In regard to salary information, the job satisfaction was found to be high (p<0.001) in cases where the salary was considered appropriate, when incentives were provided, when rewards or vacation expenses were supported, and when overtime and nightly work allowances were paid. In regard to job information, the job satisfaction was found to be high (p<0.001) when the volume of work was considered appropriate, when there were sufficient numbers in the workforce, and when the division of labor among the other personnel was clear. As a factor affecting job satisfaction of dental hygienists, the case of thinking that 'workload is appropriate' was found to be 2.052 times, showing the highest score. Job satisfaction in dental hygienists affects the turnover and has a significant effect on the performance of the organization. Therefore, it is believed, that it is urgent to improve the working environment such as salary and clear division of duties affecting job satisfaction of dental hygienists.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.69-76
• /
• 2020

Global warming is a very important problem as it causes rapid climate change and natural disasters. Therefore, researches related to renewable energy are being actively conducted while promoting policies such as reducing carbon dioxide emission and increasing the proportion of renewable energy. Solar power generation is being applied in urban areas like BIPV as well as existing idle areas outside the city. Therefore, in this study, precast concrete blocks developed for paving roadways capable of solar power generation were designed and constructed. For the evaluation of field applicability for 6 months, skid resistance and block settlement were measured. As a result of the experiment, it was found that skid resistance satisfies the standard of general roadway in Korea, but not the standard of highway. The skid resistance tended to decrease as time passed. In addition, the settlement of the block gradually increased slightly, but it is much smaller than the allowable settlement of the roadway. Therefore, it is necessary to establish a maintenance period and method based on the periodic measurement results in the future.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.553-561
• /
• 2020

Water-soluble rubber asphalt-based waterproofing material, which is one of the waterproofing materials for building structures, is mainly used indoors (toilet, kitchen, balcony, etc.). In general, asphalt-based materials are used for non-exposed installation, rather than as exposed type as they do not deviate from their usual basic black pigmentation, and water-soluble rubber asphalt-based coating waterproofing materials are basically limited to indoors because of their low physical properties. Accordingly, in order to improve the tensile and elongation properties, a silane coupling agent, an inorganic filler, and a processor oil w ere added to improve the physical properties, and accordingly, the basic physical properties of the outdoor coating waterproofing material quality standard were analyzed. As a result, the water-soluble rubber asphalt coating waterproofing material compared with the exposure quality standard showed a result that exceeded the basic physical property quality standard of silicone rubber in all items under test evaluation, but the tensile strength and tear strength of the first class of urethane rubber were chloroprene. It was found that the performance compared to the quality standards of rubber-based tear strength was about 34.2% to about 40.8%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.5
• /
• pp.449-456
• /
• 2022

This study proposes a deep learning algorithm to predict crop yield using GIS (Geographic Information System) to extract soil properties from Soilgrids and soil suitability class maps. The proposed model modified the structure of a published CNN-RNN (Convolutional Neural Network-Recurrent Neural Network) based crop yield prediction model suitable for the domestic crop environment. The existing model has two characteristics. The first is that it replaces the original yield with the average yield of the year, and the second is that it trains the data of the predicted year. The new model uses the original field value to ensure accuracy, and the network structure has been improved so that it can train only with data prior to the year to be predicted. The proposed model predicted the yield per unit area of autumn cabbage for kimchi by region based on weather, soil, soil suitability classes, and yield data from 1980 to 2020. As a result of computing and predicting data for each of the four years from 2018 to 2021, the error amount for the test data set was about 10%, enabling accurate yield prediction, especially in regions with a large proportion of total yield. In addition, both the proposed model and the existing model show that the error gradually decreases as the number of years of training data increases, resulting in improved general-purpose performance as the number of training data increases.

• Korean small business review
• /
• v.42 no.4
• /
• pp.251-283
• /
• 2020

The purpose of this study is to provide assistance to the establishment of related policies to improve the level of acceptance and use of smart factories for SMEs in Korea. To this end, the Unified Technology Acceptance Model (UTAUT) was extended to select additional factors that could affect the intention to accept technology, and to demonstrate this. To achieve the research objective, a questionnaire composed of 7-point Likert scales was prepared, and a survey was conducted for manufacturing-related companies. A total of 136 questionnaires were used for statistical processing. As a result of the hypothesis test, performance expectation and social influence had a positive (+) positive effect on voluntary use, but effort expectation and promotion conditions did not have a significant effect. As an extension factor, the network effect and organizational characteristics had a positive (+) effect, and the innovation resistance had a negative effect (-), but the perceived risk had no significant effect. When the size of the company is large, the perceived risk and innovation resistance are low, and the level of influencing factors for veterinary intentions, veterinary intentions, and veterinary behaviors are excluded. Through this study, factors that could have a positive and negative effect on the adoption (reduction) of smart factory-related technologies were identified and factors to be improved and factors to be reduced were suggested. As a result, this study suggests that smart factory-related technologies should be accepted.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.5
• /
• pp.751-757
• /
• 2022

Objective : Tumours of the brain are a rare occurrence accounting for approximately 2% of all neoplasms in adults. Few studies have been done in Nigeria on the profile of brain tumours. The aim of this study is to determine the profile of brain tumours in general and determine the change in Kanofsky Performance Score (KPS) after treatment. Methods : This is a prospective hospital-based study in Kaduna. All consecutive patients over 18 years of age with diagnosis of brain tumours from January 2016 to December 2019 were included in the study. Demographic and clinical data was collected using a proforma during the study. Patients who received treatment were followed up for 12 months. The primary outcome data was the difference in the quality of life as measured by KPS at the point of first contact and at 1-month after treatment and at 12-month follow up. Data obtained was analysed with SPSS version 25.0 for Windows. Descriptive statistics was done to determine the profile. Paired t-test at 95% confidence interval was done to check for significant correlation between the mean KPS. Results : A total of 39 consecutive patients were included in the study. There was a slight male preponderance with a M : F of 1.17 : 1. Meningioma and metastasis were more common in females while gliomas and pituitary tumours were more common in males. The mean age of patients was 49.8 years and standard deviation of 11.8 years. Pituitary tumours were the most common tumours. The most common location of the tumour was frontal lobe followed by the pituitary gland. The mean duration of symptoms before neurosurgical consultation was 38 weeks. The most common presenting symptoms of patient with brain tumour was headache. The quality of life improve compare to the baseline in 81% of patient at discharge and at 1 year follow up. The overall mortality rate was 25.6%. Conclusion : The most common brain tumour in our study is pituitary tumour. Most patients present late. The most common presenting symptoms is headache. There is significant improvement in the KPS of patients following treatment. The overall mortality rate at 1-year post treatment is 25.6%.