• 방사선산업학회지
• /
• 제17권3호
• /
• pp.225-232
• /
• 2023

In this study, poly(ethylene-co-vinyl acetate)/magnesium hydroxide (EVA/MDH) composites were prepared by electron beam crosslinking. EVA as a matrix resin and MDH as a flame retardant were melt-blended and compression molded to prepare EVA/MDH composites. The prepared EVA/MDH composites were electron beam-irradiated at various absorbed doses of 50~200kGy. The effects of electron beam irradiation on the gel content, tensile strength, elongation-at-break, thermal properties, and flame retardancy of the composites were investigated. The gel content and tensile strength increased, while the elongation-at-break decreased with an increase in the absorbed dose due to the formation of crosslinked network structures. In addition, the thermal stability and flame retardancy improved as the absorbed dose increased. Therefore, the EVA/MDH composites prepared in this study can be used as an insulation material for flame-retardant and heat-resistant wires and cables.

• 콘크리트학회논문집
• /
• 제24권6호
• /
• pp.745-752
• /
• 2012

이 연구는 혼합 알칼리 활성화 슬래그 모르타르의 압축강도에 미치는 영향에 관한 것이다. 활성화제의 효과는 활성화제의 종류, 농도 등이 강도에 영향을 미치는 것으로 알려져있다. 혼합 활성화제는 5가지 가소성 알칼리(수산화나트륨, 수산화칼슘, 수산화마그네슘, 수산화알루미늄, 수산화칼륨)와 탄산나트륨($Na_2CO_3$)를 혼합하였다. 배함은 각 활성화제를 1M, 2M, 그리고 3M의 서로 다른 농도로 하였다. 압축강도 결과는 혼합 알칼리 활성화 슬래그 모르타르는 탄산나트륨의 농도가 증가하면 증가하는 것으로 나타났다. 혼합 활성화제를 사용한 알칼리 활성화 슬래그 모르타르는 모든 재령과 시험체가 탄산나트륨을 혼합하지 않은 컨트롤 케이스보다 향상된 강도를 나타내었다. 전자주사현미경(SEM) 관찰 결과 활성화 반응으로 C-S-H와 aluminusilicate gel이 생성된 것을 볼 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.115-120
• /
• 2014

PURPOSE. The aim of this in vitro study was to evaluate the effect of aging on the tear strength and cytotoxicity of four soft denture lining materials. MATERIALS AND METHODS. Four commonly used soft denture lining materials, (Coe-Comfort$^{TM}$ GC America Inc., Alsip, IL, USA; Coe-SOFT$^{TM}$ GC America Inc., Alsip, IL, USA; Visco-gel Dentsply Caulk Milford, DE, USA; and Sofreliner Tough M Tokuyama Dental Corporation Tokyo, Japan) were selected. Sixty trouser-leg designed specimens per lining material were fabricated using a stainless steel mold for tear strength testing. The specimens were divided into non-thermocycling and 1000-, and 3000-thermocycling groups. For the cytotoxicity test, twenty-four disk shaped specimens per material were fabricated using a stainless steel mold. The specimens were soaked in normal saline solution for 24 h, 48 h and 72 h. Cytotoxicity was measured by XTT assay in L929 mouse fibroblasts. Data were analyzed by two way analysis of variance and Dunnett's test (P<.05). RESULTS. Before thermocycling, Sofreliner Tough M ($10.36{\pm}1.00N$) had the highest tear strength value while Coe-Comfort$^{TM}$ ($0.46{\pm}0.10N$) had the lowest. After 3000 cycles, Sofreliner Tough M ($9.65{\pm}1.66N$) presented the highest value and Coe-Comfort$^{TM}$ ($0.42{\pm}0.08N$) the lowest. Sofreliner Tough M, in all incubation periods was the least toxic with significant differences compared to all other materials (P<.05). Coe-Comfort$^{TM}$, Coe-$SOFT^{TM}$, and Sofreliner Tough M did not show any significant differences within their material group for all incubation periods. CONCLUSION. This in vitro study revealed that aging can affect both the tear strength and cytotoxicity of soft denture materials depending on the composition.

• 문화기술의 융합
• /
• 제9권5호
• /
• pp.557-562
• /
• 2023

본 연구는 순환자원을 대량 활용한 지반안정재를 터널공사 시 보조공법으로 이용하는 강관다단공법의 주입재로 활용을 검토하기 위해 다양한 주입재 배합비에 따른 겔타임, 호모겔 강도를 비교하였다. 강관다단공법은 터널의 보조공법으로써 시공 후 초기강도의 발현이 중요한 요인으로, 초기에 강도발현이 우수할수록 강관다단공법에 적합한 주입재로 활용이 가능하다. 실내시험 결과, 순환자원을 활용하는 주입재의 호모겔타임은 시멘트를 주입재로 활용하는 배합비에 비해 많은 시간이 필요한 것으로 나타났으며, 2.0MPa를 만족하는 초기강도 양생시간은 24시간 이상이 필요한 것으로 확인되었다. 따라서 순환자원 활용 주입재는 동일 배합비의 시멘트에 비해 긴 초기경화 시간이 필요한 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1902-1906
• /
• 2010

A microchip electrophoresis (ME) method was developed using a programmed field strength gradients (PFSG) for the single nucleotide polymorphism (SNP) based fast identification of cattle breeds. Four different Korean cattle (Hanwoo) and Holstein SNP markers amplified by allele-specific polymerase chain reaction were separated in a glass microchip filled with 0.5% poly(ethyleneoxide) ($M_r$ = 8 000 000) by PFSG as follows: 750 V/cm for 0 - 14 s, 166.7 V/cm for 14 - 31 s, 83.3 V/cm for 31 - 46 s, and 750 V/cm for 46 - 100 s. The cattle breeds were clearly distinguished within 45 s. The ME-PFSG method was 7 times and 5 times faster than the constant electric field ME method and the capillary electrophoresis- PFSG method, respectively, with a high resolving power ($R_s$ = 5.05 - 9.98). The proposed methodology could be a powerful tool for the fast and simultaneous determination of SNP markers for various cattle breeds with high accuracy.

• 한국지반환경공학회 논문집
• /
• 제7권4호
• /
• pp.25-34
• /
• 2006

차수 및 지반보강용 주입재의 주류를 이루고 있는 보통포틀랜드시멘트와 규산나트륨(3호)는 겔화 반응 후에 규산나트륨(3호)에 포함 되어있는 산화나트륨이 시멘트수화 경화물과 반응하지 않은 미반응 규산과 함께 수중에 용탈되며, 내구성이 결여되는 주입재로 인식되고 있다. 본 연구에서는 시멘트 수화 지연제가 규산나트륨-시멘트 겔의 일축압축강도에 미치는 영향을 파악하기 위하여 전자현미경촬영, X-선회절분석, 핵자기공명스펙트럼, 일축압축강도시험 등을 실시하였다. 시멘트 수화지연제인 소디움트리포리포스페이트가 포함된 규산나트륨(3호)-시멘트 그라우트의 초기강도가 고강도임을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.142-143
• /
• 2014

In this study, as to enhance the efficiency and workability, binder contained 3 types of gels have been used to replacement the OPC. Fundamental properties and length change of the concrete have been tested to evaluate the effect of different binders. The following results could be made as the conclusion. When the binder contained 3 types of gels used, the flowability increased, whereas the air content decreased. There showed some different air content when the component of binder changed but the difference was consider as limit. For the strength properties, with the using of binder contained 3 types of gels increased the strength. Specimen of FA20SF5 showed the better strength and lower length change of drying shrinkage than other specimens.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.48-55
• /
• 2015

Hardened cement-based materials exposed to the high temperatures of a fire are known to experience change in the pore structure as well as microstructural changes that affect their mechanical properties and tend to reduce their durability. In this experimental investigation, hardened Portland cement pastes were exposed to elevated temperatures of 200, 400, 600, 800, and $1000^{\circ}C$ for 60 minutes, and the resulting damage was studied by thermogravimetry (TG), mercury intrusion porosimetry (MIP) and density measurements. These results revealed that the residual compressive strength is increased at temperatures greater than $400^{\circ}C$ due to a small pore size of 3 nm and/or rehydration of the dehydrated cement paste. However, a loss of the residual strength occurs at temperatures exceeding 500 and $600^{\circ}C$. This can be attributed to the decomposition of hydrates such as portlandite and to an increase in the total porosity.

• 폴리머
• /
• 제25권2호
• /
• pp.270-278
• /
• 2001

의료용 고분자로 널리 알려진 poly(vinylalcohol)(PVA)와 poly(N-vinylpyrrolidone)(PVP)를 이용하여 상처치료용 하이드로겔을 제조하였다. PVP 하이드로겔의 기계적 강도를 향상시키기 위해 PVA/PVP 혼합용액에 \"freezing and thawing (동결융해)\"을 반복한 후 방사선 ($^{60}$Co${\gamma}$-rays)을 조사하여 하이드로겔을 얻었다. PVA와 PVP의 조성비 (30 : 70 ~ 100 : 0), 동결융해의 반복횟수, PVA 분자량을 변화시키면서 PVA/PVP 하이드로겔의 겔화율, 팽윤도, 겔강도를 측정하였다. PVA/PVP 하이드로겔은 방사선 조사로만 제조되었을 때 보다 동결융해 반복 후 방사선조사했을 때 겔화율과 겔강도가 향상되었다. 이외에 동결융해의 반복정도에 따른 물성의 특징을 논의하였다.특징을 논의하였다.

• 한국재료학회지
• /
• 제15권7호
• /
• pp.444-447
• /
• 2005

In this study, $Hydroxyapatite+TiO_2(HAp+TiO_2)$ composite sol coatings on Cp-Ti substrates were deposited by using a sol-gel derived precursor. Prior to hydroxyapatite coating, the samples were micropolished and divided into three sets. The first set was coated with hydroxyapatite (HAp) directly on Cp-Ti. The second set was first coated with intermediate titania layer and then coated with HAp. The third set samples were coated with $HAp+TiO_2$ (50:50) composite sol. Each samples were predried at $200^{\circ}C$, and heat treated at $600^{\circ}C$. The formation of hydroxyapatite has been confirmed by XRD analyses and the substrate material was found to be oxidized with negligible amount of CaO in the coating. The NaOH treated samples showed the presence of rutile crystal. The SEM studies revealed surface morphologies of each samples. $HAp+TiO_2$ composite sol coating layer was found to be smooth. The bonding strength of each samples were calculated using pull out tests. The bonding strength of the $HAp+TiO_2$ composite sol coating on substrate was 29.35MPa.