• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권3호
• /
• pp.201-213
• /
• 2012

A gear type lubrication pump is an essential component of the powertrain and has a major role for supplying oil to the gears and bearings in automatic transmission with a hydraulic clutch. Therefore, the durability test code design of lubrication pump is very important to ensure the reliability of the entire transmission and the vehicle. In this study, the design process for the life testing of lubrication pump has been generalized by four steps. The four design steps of the life testing of lubrication pump consist of the configuration of load spectrum, rain flow counting and analysis of load level, the equivalent damage assessment and test code generation. In fact, the load spectrum should be obtained from the field operating condition but that kind of data is the top secret of manufacturers. This is not open to the public in general. So we could use the artificially simulated load spectrum instead of field obtained one and focused on the development of the general process for designing the life test of a gear type lubrication pump. Reliability goals for lubrication pump, pressure, torque, temperature and load spectrum, if present, as appropriate for the given test conditions, accelerated life testing for the lubrication pump can be designed by the developed design steps.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.660-664
• /
• 2007

고속철도차량은 견인력 및 제동력을 전달하기 위하여 한 편성당 12개의 전동기를 동력차 및 동력객차에 설치하고 있다. 각각의 전동기는 회전력을 트리포드 축을 통하여 윤축에 전달한다. 본 연구에서는 한국형고속열차 트리포드 축에 회전력을 직접 측정할 수 있는 시스템을 구축하여 본선 주행시 토크를 측정하고, 그 결과를 검토하고자 한다.

• Tribology and Lubricants
• /
• 제29권6호
• /
• pp.397-402
• /
• 2013

This study examined the tribological characteristics of the drive shaft and axle system in vehicles. The first drive shaft example contained end play for a CV joint that transferred part of the transmission power to the wheel. The joint part of the drive shaft was deformed because of reduced durability due to wear. Thus, vibrations caused the body to shake and become unbalanced when the drive shaft transferred the power. The second example was the cross-section of a shaft that connected the slip-connection of the propeller shaft on the input side to the yoke flange of the output side; the durability was reduced because of corrosion. End play caused by wear between the bearing and cross-section shaft appeared to cause shaking. In the third example, a grease leak reduced lubrication and thus caused damage to the hub bearing and inside the knuckle. The failure was produced by sticking. The fourth example had noise produced by the gear and gear transfer. This was due to the backlash of the pinion and few ring gears for the differential gear. Therefore, drive shaft and axle systems must be thoroughly checked and managed to minimize and reduce failure phenomena.

• 한국CDE학회논문집
• /
• 제17권5호
• /
• pp.312-323
• /
• 2012

Planetary gearing is a gear system consisting of one or more planet gears, revolving about a sun gear. While the planetary gear system has many advantages- for example, high power density, large reduction in a small volume, multiple kinematic combinations, pure torsional reactions, and coaxial shafting, it has not been widely used because of its high bearing loads, inaccessibility, and design complexity. It is also necessary to shift several pairs of gear profiles at a same time. Therefore, designing profile shifted planetary gear system is a difficult and know-how dependent job. This study provides a practical solution to design a profile shifted gear system by the procedural design scheme, and proposes a bearing integrated structure of the dual stage profile shifted gear system with a robust output end. A dual stage profile shifted gear system with the bearing integrated structure is manufactured by the proposed design scheme in this study. This gear system is verified that it is good enough to commercialize, because it has high performance with high gear ratio and robust output end against axial and radial directional runouts in a small space.

• 대한기계학회논문집
• /
• 제9권1호
• /
• pp.81-90
• /
• 1985

본 논문에서는 이에 대체하는 방법으로써 전달 매트릭스 방법을 들수 있는데, 선형 진동계 해석에 있어 이 방법의 효용은 많은 논문을 통해 실증된 바이다. 특히 저어널 베어링의 댐핑효과는 크고 또한 운전회전속도에서 선형화된 스프링 및 댐핑계 수들이 수평 및 수직방향으로 연성되어 있어 전달 매트릭스 방법의 적용이 이상적이다. 회전축계의 진동 해석에 있어 낮은 공진회전수와 안정한계회전수, 즉 시스템 댐핑이 영이 되는 점을 규명하는 것이 실제에서 중요하므로 낮은 고유 진동수만을 구하면 되 는데, 이를 위하여 수치해석의 기법을 타 각도로 연구 검토할 필요가 있다.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.65-72
• /
• 2016

This paper presents the analysis of the analysis of thrust characteristics of linear induction motors(LIMs) according to secondary reaction plate. LIMs are well known as high speed transport systems, which can obtain thrust directly without gears and links, or auxiliary mechanisms. A simple structure, easy maintenance, and less environmental pollution are advantages of LIMs. In transport systems using LIMs, the secondary reaction plate is an important design factor, because it has considerable impact on the cost of the railway as well as the performance of the LIMs. This paper deals analyzed the characteristics of linear induction motor used for moving the vehicle of container scanner. Thrust, efficiency and load characteristic were interpreted with FEM regarding two models whose material of secondary reaction plate was copper and aluminum. It suggested the interpretation of thrust, efficiency and power factor characteristic along slip and compared the operation ability of linear induction motor through characteristics analysis along the load.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.85-91
• /
• 2014

The rotation of a spindle unit must be accurate for high-quality machining and to improve the quality of the machine tools. Therefore, the proper measurement of the rotation accuracy and ensuring a proper analysis are very important. Separate processes are necessary because spindle errors and roundness errors associated with the test balls can both factor into the measured rotation error values. We used three methods to discern test ball errors and analyzed which could be deemed as the most proper technique in a test of the rotation accuracy of the main spindle of a machine tool.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.113-118
• /
• 2017

In this paper, a study on the performance evaluation of a cycloid reducer for remote weapons systems is presented. Reduction gears applied to remote weapons vehicles need to be compact and capable of large torque transmissions as well as require structural optimization, high load capacity, and high precision position control. To meet these requirements, a cycloid reducer with low backlash, high precision, high overload capability, high rigidity, and high efficiency is required. Thus, a cycloid reducer with a reduction ratio of 127:1, backlash of 1 arcmin (1/60 deg) or less, and reduction gear efficiency of 70% or more, which are the design requirements for a remote weapons system, was designed utilizing a design and analysis program (HEXAGON) for gear engineering. To confirm the performance of the cycloid reducer, the hardness of the main components of the manufactured cycloid reducer, reduction ratio, and efficiency were measured.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.53-58
• /
• 2003

In recent years, the need for multi-stage gear drives, which highly reduce output speed, has been increased. However, the design of multi-stage gear drives have been carried out by a limited number of experts. The consideration for the direction of input and output axes also makes their design very difficult. The purpose of this study is to develop an algorithm for automatically generating complex multi-stage gear drives and to implement a design supporting system for multi-stage gear drives. There are 4 stages in the proposed algorithm, and major design parameters,.such as the direction of input and output axes, reduction ratio, etc. are set up in the first stage. In the second stage, all mechanisms are generated, and various rules are applied to select feasible mechanisms. In the third stage, the gear ratio of each stage is divided from total gear ratio. Next, the specifications of gears for feasible mechanisms are calculated and their bending strength and surface durability are estimated. In the forth stage, appraised indexes are calculated and provided to support the estimation of the generated gear drives.

• Journal of Mechanical Science and Technology
• /
• 제14권4호
• /
• pp.418-425
• /
• 2000

Recently, many passenger cars have adopted automatic transmissions for shifting gears, and thus the smooth and precise control of gear shifts of passenger car automatic transmissions has become more and more essential for the riding comfort of vehicles equipped with automatic transmissions. In this article, a neural network-based supervisor for an automotive shift controller considering the throttle opening, variations in throttle opening, and the driving load is presented. For using the driving load information, an observer-based driving load estimation algorithm is proposed. A proportional-integral-derivative controller along with an open loop controller is used as a low level controller for controlling the gear shifts, and a supervisory controller for properly adapting the shift control parameters of the low level shift controller is designed using ANFIS. To evaluate the control performance of the proposed supervisor-based shift controller, both simulation studies and experimental studies are performed for various shifting situations.