• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1853-1859
• /
• 2008

IGBT modules are designed for low loss, rugged for all environments and user friendly. Low on state saturation voltage with high switching speed is the primary concerns. In this paper selection of IGBT, module ratings and characteristics are discussed. The IGBT design topic of protection against over voltage and over current are covered. Emphasis on turn off switching, short circuit switching and necessary precautions are dealt. Selection of IGBT device, gate drive power, and its lay out considerations are covered in detail.

• 한국전자파학회논문지
• /
• 제28권6호
• /
• pp.435-443
• /
• 2017

본 논문에서는 cascode 구조가 적용된 Class-E 스위칭 모드 CMOS 전력증폭기의 common-gate 트랜지스터 게이트 바이어스 효과에 대해 분석하였다. 게이트 바이어스 효과를 확인하기 위해서 전력증폭기의 DC 전력소모, 효율을 분석하였다. 분석 결과를 통해서 전력증폭기의 최고 효율을 보여주는 common-gate 트랜지스터의 게이트 바이어스가 일반적으로 사용하는 전력증폭기 전원 전압보다 낮음을 확인하였다. 트랜지스터의 게이트 바이어스가 계속 감소함에 따라 on-저항을 확인하여 커지고, 이에 따라 출력, 효율이 감소하는 것도 확인하였다. 이 두 가지 현상을 통해 게이트 바이어스가 스위칭 모드 전력증폭기에 미치는 영향을 분석하였다. 이 분석을 증명하기 위해서 $0.18{\mu}m$ RF CMOS 공정으로 1.9 GHz 스위칭 모드 전력증폭기를 설계하였다. 앞에서 설명한 것처럼 전력증폭기의 최대 효율은 전력증폭기의 인가 전압(3.3 V)보다 낮은 2.5 V에서 확인할 수 있었다. 이 때 최고 출력은 29.1 dBm, 최고 효율은 31.5 %이다. 측정 결과를 통해서 스위칭 모드 전력증폭기 common-gate 트랜지스터의 게이트 바이어스 효과를 실험적으로 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권7호
• /
• pp.358-363
• /
• 2004

A new 600 V dual gate transistor employing thyristor action, which incorporates floating PN junction and trench gate IGBT, is proposed to improve the forward current-voltage characteristics and the short circuit ruggedness. Our two-dimensional numerical simulation shows that the proposed device exhibits low forward voltage drop and eliminates the snapback phenomena compared with conventional trench gate IGBT and EST The proposed device achieves high current saturation characteristics by separating floating N+ emitter and cathode. The proposed device achieves low saturation current value compared with conventional devices, and the short-circuit ruggedness is improved. The proposed device may be suitable for the use of high voltage switching applications.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.723-730
• /
• 2012

This paper presents a new ZVS single phase bridgeless (Power Factor Correction) PFC, using an active clamp to achieve zero-voltage-switching for all main switches and diodes. Since the presented PFC uses a bridgeless rectifier, most of the time, only two semiconductor components are in the main current path, instead of three in conventional single-switch configurations. This property significantly reduces the conduction losses,. Moreover, zero voltage switching removes switching loss of all main switches and diodes. Also, auxiliary switch turns on zero current condition. The presented converter needs just a simple non-isolated gate drive circuitry to drive all switches. The eight stages of each switching period and the design considerations and a control strategy are explained. Finally, the converter operation is verified by simulation and experimental results.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3334-3341
• /
• 2023

We studied the irradiation effects of fast neutron generated by a 30 MeV cyclotron on the electrical and switching characteristics of NPT-IGBT devices. Fast neutron fluence ranges from 2.7 × 10⁹ to 1.82 × 10¹³ n/cm². Electrical characteristics of the IGBT device such as I-V, forward voltage drop and additionally switching characteristics of turn-on and -off were measured. As the neutron fluence increased, the device's threshold voltage decreased, the forward voltage drop increased significantly, and the turn-on and turn-off time became faster. In particular, the delay time of turn-on switching was improved by about 35% to a maximum of about 39.68 ns, and that of turn-off switching was also reduced by about 40%-84.89 ns, showing a faster switching.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.131-131
• /
• 2009

Silicon Carbide (SiC) is a material with a wide bandgap (3.26eV), a high critical electric field (~2.3MV/cm), a and a high bulk electron mobility ($\sim900cm^2/Vs$). These electronic properties allow high breakdown voltage, high-speed switching capability, and high temperature operation compared to Si devices. Although various SiC DMOSFET structures have been reported so far for optimizing performances, the effect of channel dimension on the switching performance of SiC DMOSFETs has not been extensively examined. This paper studies different channel dimensons ($L_{CH}$ : $0.5{\mu}m$, $1\;{\mu}m$, $1.5\;{\mu}m$) and their effect on the the device transient characteristics. The key design parameters for SiC DMOSFETs have been optimized and a physics-based two-dimensional (2-D) mixed device and circuit simulator by Silvaco Inc. has been used to understand the relationship. with the switching characteristics. To investigate transient characteristic of the device, mixed-mode simulation has been performed, where the solution of the basic transport equations for the 2-D device structures is directly embedded into the solution procedure for the circuit equations. We observe an increase in the turn-on and turn-off time with increasing the channel length. The switching time in 4H-SiC DMOSFETs have been found to be seriously affected by the various intrinsic parasitic components, such as gate-source capacitance and channel resistance. The intrinsic parasitic components relate to the delay time required for the carrier transit from source to drain. Therefore, improvement of switching speed in 4H-SiC DMOSFETs is essential to reduce the gate-source capacitance and channel resistance.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.361-364
• /
• 2013

기존의 DC-DC 부스트 변환기에서 사용되는 non-overlapping gate driver는 dead-time이 고정되어 있기 때문에 body-diode conduction loss 또는 charge-sharing loss가 발생하는 문제점을 가지고 있다. 이러한 손실을 줄이기 위해 사용된 기존의 적응제어 방식의 경우는 CCM 동작 시 전력트랜지스터가 동시에 on이 되는 구간이 발생하여 시스템 효율이 감소하는 문제점이 있다. 따라서 본 논문 에서는 이러한 문제점을 해결할 dead-time 적응제어 기능과 power switching 기능을 갖는 DC-DC 부스트 변환기를 설계 하였다. CMOS 0.35um 공정을 사용하였고, 2.5V 입력으로 3.3V의 출력전압을 얻으며, 스위칭 주파수는 500kHz 이다. 부하전류 150mA일 때 가장 높은 95.3%의 효율을 얻었다. 설계된 회로의 칩 면적은 $1720um{\times}1280um$이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.303.1-303.1
• /
• 2014

좋은 전기적 특성을 가지면서 소자의 크기를 줄이기에 용이한 Gate-all-around (GAA) twin Si nanowire field-effect transistors (TSNWFETs)의 연구가 많이 진행되고 있다. Switching 특성과 단채널 효과가 없는 TSNWFETs의 특성은 GAA 구조의 본질적인 특성이다. TSNWFETs는 기존의 single Si nanowire TSNWFETs와 bulk FET에 비하여 Drive current가 nanowire의 지름에 많은 영향을 받지 않는다. 그러나 TSNWFETs의 전체 on-current는 훨씬 작고 nanowire의 지름이 작아지면서 줄어들게 되면서 소자의 sensing speed와 sensing margin 특성의 악화를 가지고 온다. GAA TSNWFETs의 제작 및 전기적 실험에 대한 연구는 많이 진행되었으나, GAA TSNWFETs의 전기적 특성에 대한 이론적 연구는 매우 적다. 본 연구에서는 GAA TSNWFETs의 nanowire 크기에 따른 전기적 특성을 관찰하였다. GAA TSNWFETs와 bulk FET의 전기적 특성을 양자역학을 고려하여 3차원 TCAD 시뮬레이션을 툴을 이용하여 계산하였다. GAA TSNWFETs와 bulk FET의 전류-전압 특성 계산을 통해 on-current 크기, subthreshold swing, drain-induced barrier lowering (DIBL), gate-induced drain leakage를 보았다. 전류가 흐르는 경로와 전기적 특성의 물리적 의미에 대한 연구를 위해 TSNWFETs에서의 전류 밀도, conduction band edge, potential 특성을 분석하였다. 시뮬레이션 결과를 통해 Switching 특성, 단채널 효과에 대한 면역 특성, nanowire의 단면적에 따른 전류 흐름을 보았다. nanowire의 크기가 작아지면서 DIBL이 증가하고 문턱전압과 전체 on-current는 감소하면서 소자의 특성이 악화된다. 이러한 결과는 GAA TSNWFETs의 전기적 특성을 이해하고 좋은 소자 특성을 위한 구조를 연구하는데 많은 도움이 될 것이다.

• Journal of Power Electronics
• /
• 제7권2호
• /
• pp.146-158
• /
• 2007

A multi-pulse GTO based voltage source converter (VSC) topology together with a fundamental frequency switching mode of gate control is a mature technology being widely used in static synchronous compensators (STATCOMs). The present practice in utility/industry is to employ a high number of pulses in the STATCOM, preferably a 48-pulse along with matching components of magnetics for dynamic reactive power compensation, voltage regulation, etc. in electrical networks. With an increase in the pulse order, need of power electronic devices and inter-facing magnetic apparatus increases multi-fold to achieve a desired operating performance. In this paper, a competitive topology with a fewer number of devices and reduced magnetics is evolved to develop an 18-pulse, 2-level $\pm$ 100MVAR STATCOM in which a GTO-VSC device is operated at fundamental frequency switching gate control. The inter-facing magnetics topology is conceptualized in two stages and with this harmonics distortion in the network is minimized to permissible IEEE-519 standard limits. This compensator is modeled, designed and simulated by a SimPowerSystems tool box in MATLAB platform and is tested for voltage regulation and power factor correction in power systems. The operating characteristics corresponding to steady state and dynamic operating conditions show an acceptable performance.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.815-818
• /
• 1998

The Insulated Gate Bipolar Transistor has the characteristics of MOSFET and BJT. The characteristics of proposed device exhibit high speed switching, the voltage controlled property, and the low ON resistance. This hybrid device has been used and developed continuously in the power electronic engineering field. We can simulate many IGBT circuits, such as the motor drive circuit, the switching circuits etc, with PSpice. However, some problems in PSpice is that the IGBT is old-fashioned and is very difficult to get it. In this paper, the IGBT in PSpice is considered as the basic structure. We changed the valuse of base width, gate-drain overlaping area, device area, and doping concentration, then calculated MOS transconductance, ambipolar recombination lifetime etc. Using this resultant parameter, we could predict the transient response characteristicsof IGBT, for examplex, voltage overshoot, the rising curve of voltage, and the falling curve of current.