• 멤브레인
• /
• 제28권4호
• /
• pp.221-232
• /
• 2018

Poly(imide siloxane)(Si-PI)와 polyvinylpyrrolidone (PVP)를 혼합한 고분자를 사용하여 실리카가 함유된 탄소 분리막을 제조하였다. 고분자 혼합물의 열분해에 의해 제조 된 다공성 탄소 구조의 특성은 두 고분자의 미세 상 분리 거동과 관련이 있다. Si-PI와 PVP의 고분자 혼합물의 유리 전이 온도(Tg)는 시차 주사 열량계를 사용하여 단일 Tg로 관찰되었다. 또한 $C-SiO_2$ 막의 질소 흡착 등온선을 조사하여 다공성 탄소 구조의 특성을 규명했다. Si-PI/PVP로부터 유도 된 $C-SiO_2$ 막은 IV형 등온선을 나타내었고 중간기공의 탄소 구조와 관련된 히스테리시스 루프를 가지고 있었다. 분자 여과 확인을 위해서, Si-PI/PVP의 비율과 열분해 온도 및 등온 시간과 같은 열분해 조건을 다르게 하여 $C-SiO_2$ 막을 제조하였다. 결과적으로, 120분 간의 등온 시간 동안 $550^{\circ}C$에서 Si-PI/PVP의 열분해에 의해 제조된 $C-SiO_2$ 막의 투과도는 820 Barrer ($1{\times}10^{-10}cm^3(STP)cm/cm^2{\cdot}s{\cdot}cmHg$)이었으며, $O_2/N_2$ 선택도는 14이었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권4호
• /
• pp.1-15
• /
• 2018

Despite of safety issues related to radiological hazards, 31 countries around the world are operating more than 450 nuclear power plants (NPPs). To operate NPPs safely, safety regulations from radiation protection organizations were developed and adopted in many countries. However, many cases of radionuclide releases at foreign NPPs have been reported. Almost all commercial NPPs routinely release radioactive materials to the surrounding environments as liquid and gas phases under control. These releases are called 'planned releases' which are planned, regularly monitored, and well documented. Meanwhile, the releases focused in this review, called 'unplanned releases', are neither planned nor monitored by regulatory and/or protection organizations. NPPs are generally composed of various structures, systems and components (SSCs) for safety. Among them, the SSCs near reactors are closely related to safety of NPPs, and typically fabricated to comply with stringent requirements. However, some non-safety related SSCs such as underground pipes may be constructed only according to commercial standards, causing the leakage of radioactive fluids usually containing tritium ($^3H$). This paper discusses SSCs of NPPs and introduces several cases of unplanned releases at foreign NPPs. The current regulation on the environmental radiological surveillance and assessment around the NPPs in South Korea are also examined.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.346-348
• /
• 2004

In this rarer, we introduce a new Fuzzy Polynomial Neural Networks (FPNNs)-like structure whose neuron is based on the Fuzzy Set-based Fuzzy Inference System (FS-FIS) and is different from that of FPNNs based on the Fuzzy relation-based Fuzzy Inference System (FR-FIS) and discuss the ability of the new FPNNs-like structurenamed Fuzzy Set-based Polynomial Neural Networks (FSPNN). The premise parts of their fuzzy rules are not identical, while the consequent parts of the both Networks (such as FPNN and FSPNN) are identical. This difference results from the angle of a viewpoint of partition of input space of system. In other word, from a point of view of FS-FIS, the input variables are mutually independent under input space of system, while from a viewpoint of FR-FIS they are related each other. In considering the structures of FPNN-like networks such as FPNN and FSPNN, they are almost similar. Therefore they have the same shortcomings as well as the same virtues on structural side. The proposed design procedure for networks' architecture involves the selection of appropriate nodes with specific local characteristics such as the number of input variables, the order of the polynomial that is constant, linear, quadratic, or modified quadratic functions being viewed as the consequent part of fuzzy rules, and a collection of the specific subset of input variables. On the parameter optimization phase, we adopt Information Granulation (IG) based on HCM clustering algorithm and a standard least square method-based learning. Through the consecutive process of such structural and parametric optimization, an optimized and flexible fuzzy neural network is generated in a dynamic fashion. To evaluate the performance of the genetically optimized FSPNN (gFSPNN), the model is experimented with using gas furnace process dataset.

• 한국화재소방학회논문지
• /
• 제29권4호
• /
• pp.61-66
• /
• 2015

건축물 내에 노출배관의 자재에 대한 별도의 규정을 두지 않음에 따라 내부식성, 내약품성 측면에서 우수하다고 알려진 Poly Vinyl Chloride (PVC)관을 많이 사용하고 있다. 그러나 화재시 유독가스의 발생과 화재의 확산 방지에 취약하다는 우려의 시각이 있다. 노출배관은 불연재를 사용하여야 화재시 유독가스의 확산을 방지하면서 인명이나 재산상의 피해를 최소화할 수 있다. 초대형 건축물이 많이 건설되고 있는 시기에 화재시 피해의 심각성이 매우 우려된다. 건축물의 화재안전기준을 강화하고, 높아진 안전의식을 수용하여야 선진국으로의 진입에 한걸음 더 나아갈 수 있다. 노출배관에 사용되는 자재를 조사하고, 선진국의 기준에 대해 분석하여 효율성을 연구함으로서 국민안전을 증대시킬 수 있다. 국내 각 지역별 건축물의 노출배관에 대해 현장의 실태를 조사하여 대안을 모색하고자 한다. 건축물 안전과 거주자의 안전 확보 및 국내 외 노출배관의 불연재 사용에 대한 실태를 바탕으로 관련법규를 개선함으로 국민안전에 대하여 그 효율성을 제고한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.203-206
• /
• 2004

For the realization of PRAM, $Ge_2Sb_2Te_5$ (GST) has been employed for the phase transition between the crystal and amorphous states by electrical joule heating. Although there has been a vast amount of results concerning the GST in material aspect for the laser-induced optical storage disc applications, the process-related issues of GST for the PRAM applications have not been reported. In this work, the etching behaviors of GST were investigated when the processing conditions were varied in the high-density helicon plasma. The etching parameters of RF main power, RF bias power, and chamber pressure were fixed at 600 W, 150 W, and 5 mTorr, respectively. For the etching processes, gas mixtures of $Ar/Cl_2$, $Ar/CF_4$, and $Ar/CHF_3$ were employed, in which the etching rates and etching selectivities of GST thin film in given gas mixtures were evaluated. From obtained results, it is found that we can arbitrarily design the etching process according to given cell structures and material combinations for PRAM cell fabrications.

• Steel and Composite Structures
• /
• 제51권4호
• /
• pp.351-361
• /
• 2024

Accurate measurement of K_IC values for gas pipeline steels is important for assessing pipe safety using failure assessment diagrams. As direct measurement of K_IC was impossible for the API X70 pipeline steel, multi-specimen fracture tests were conducted to measure J_IC using three-point bend geometry. The J values were calculated from load-displacement (F-δ) plots, and the associated crack extensions were measured from the fracture surface of test specimens. Valid data points were found for the constructed J-Δa plot resulting in J_IC=356kN/m. More data points were added analytically to the J-Δa plot to increase the number of data points without performing additional experiments for different J-Δa zones where test data was unavailable. Consequently, displacement (δ) and crack-growth (Δa) from multi-specimen tests (with small displacements) were used simultaneously, resulting in the variation of Δa-δ (crack growth law) and δ-Δa obtained for this steel. For new Δa values, corresponding δ values were first calculated from δ-Δa. Then, corresponding J values for the obtained δ values were calculated from the area under the F-δ record of a full-fractured specimen (with large displacement). Given Δa and J values for new data points, the developed J-Δa plot with extra data points yielded a satisfactory estimation of J_IC=345kN/m with only a -3.1% error. This is promising and showed that the developed technique could ease the estimation of J_IC significantly and reduce the time and cost of expensive extra fracture toughness tests.

• 한국전산구조공학회논문집
• /
• 제16권4호
• /
• pp.407-417
• /
• 2003

최근 구조최적화분야에서 활발하게 사용되고 있는 유전알고리즘은 해집단을 운용하기 때문에, 많은 반복수와 적응도 평가를 위하여 해집단의 수에 해당하는 구조해석을 필요로 하며, 또한 교배율과 돌연변이율 등의 파라미터에 따라 알고리즘의 성능이 변화하므로 문제에, 따라 적합한 파라미터 설정이 필요한 근본적인 단점을 지니고 있다. 본 연구에서는 기존 유전알고리즘의 단점을 극복할 수 있는 복합유전알고리즘을 마이크로유전알고리즘과 단순유전알고리즘을 결합한 형식으로 그리고, 최적화에 요구되는 연산을 다수의 개인용 컴퓨터에서 동시에 분산하여 수행할 수 있는 고성능 분산 복합유전알고리즘으로 개발하였다. 개발된 알고리즘은 철골 가새골조 구조물의 최소중량설계에 적용하여 그 성능을 평가하였다.

• 한국재료학회지
• /
• 제13권11호
• /
• pp.742-748
• /
• 2003

The structural parameters such as Lc, La and d of $CO_2$activated isotropic carbon fibers(ACFs) were obtained from XRD in order to understand a development mechanism of micropores. And the structural parameters were compared with specific surface area(SSA) data. The $d_{002}$, Lc, and La of the original fiber were measured to be 4.04$\AA$, 6.2$\AA$, and 23.6$\AA$, respectively. Carbonization of outer-parts and oxidization of inner-parts of the original fibers were far from completeness. It was observed that the structural changes of the ACFs during activation take place severely, therefore the carbonization and the oxidization of the fibers take place simultaneous with pore developments. The $d_{002}$ of the ACFs was increased to be 2.80$\AA$, and the La of the ACFs was decreased to be 17.0$\AA$ by activation. It was shown that the pores are developed continuously from the outer-parts to the inner-parts of the fibers, therefore the SSA increases as a result of the development of pores fully to the inner-parts of the fiber when the burn-off degree was over :39%. It seems that the (002) planes of crystallites contribute to the micropore wall related to the super high SSA.SSA.

• 한국주조공학회지
• /
• 제8권4호
• /
• pp.453-458
• /
• 1988

Al-Si alloy powder produced by the gas atomizer showed fine eutectic structure between ${\alpha}-dendrites$, that was grown by coupled growth, and there remained small amount of ${\alpha}$ in Al - 20 wt% Si alloy. The morphology of Si in the eutectic structure was largely influenced by the recalescence caused by solidification latent heat, and that was thought to be due to decrement of the surface energy of Si. In modified eutectic Si by rapid solidification, fine twin about $0.01\;{\mu}m$ was observed and growth direction of eutectic Si was <112>. This fact implied that the growth mechanism of eutectic Si in rapid solidification was related to TPRE mechanism. Due to rapid solidification Si was soluble in ${\alpha}-phase$ in Al - 12.6wt%Si alloy up to about 3.4wt%, and the solubility of Si in ${\alpha}-phase$ reaches the equilibrium solubility stare after 60min, holding when it was held isothermally at $253-296^{\circ}C$.

• 천문학논총
• /
• 제30권2호
• /
• pp.169-171
• /
• 2015

NGC147 and NGC185, paired satellites of the Andromeda galaxy, possess the same order of mass and analogous structures, but they show different star formation and different amounts of interstellar gas and dust. Therefore, we present the first reconstruction of the star formation history of NGC147 and NGC185. Asymptotic Giant Branch stars are highly evolved stars that are brightest in K-band. This maximum K-band magnitude is related to the birth mass of stars. As a result, we have found a 9.9 Gyr old single star formation epoch for NGC185 followed by relatively continuous star formation. NGC147, however, has passed through two star formation episodes; one is as old as ~6 Gyr and the other is as recent as ~850 Myr. Asymptotic Giant Branch stars are also important dust factories; by fitting Spectral Energy Distributions to observed near and mid infrared data for each star, we were able to measure the dust production rates of individual stars; on order of $10^{-5}M_{\odot}yr^{-1}$. Hence, we estimate the total mass entering the interstellar medium to be $1.06{\times}10^{-4}M_{\odot}yr^{-1}$ and $2.89{\times}10^{-4}M_{\odot}yr^{-1}$ for NGC147 and NGC185.