• 제목/요약/키워드: gas production rate

검색결과 670건 처리시간 0.023초

The Effect of Yerba Mate (Ilex Paraguariensis) Supplementation on Nutrient Degradability in Dairy Cows: An In sacco and In vitro Study

  • Hartemink, Ellen;Giorgio, Daniela;Kaur, Ravneet;Di Trana, Adriana;Celi, Pietro
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제28권11호
    • /
    • pp.1606-1613
    • /
    • 2015
  • This study was carried out to investigate the effects of Yerba Mate (YM) supplementation on nutrients' degradation, in vitro dry matter disappearance, gas production and rumen ammonia concentration. Three rumen-fistulated Holstein Friesian cows were used for the in situ incubations and provided rumen liquor for in vitro incubations. The inclusion of YM in a control diet (pasture+pellets) affected some in sacco degradation parameters. YM supplementation decreased the effective degradability and degradation rate of pasture crude protein (CP), and it seems to slow down the degradation of pasture neutral detergent fiber. A significant increase of degradation of pasture acid detergent fiber (ADF) was detected after YM inclusion in the control diet. YM supplementation reduced in vitro gas production of pasture and ammonia concentration of pellets. The addition of YM in ruminant diet could decrease ammonia production and increase protein availability for productive purposes. The moderate presence of tannins in YM could have affected the degradation kinetics of pasture CP and ADF and the ammonia production of pellets.

소화가스의 막 분리 정제에 의한 도시가스용 바이오메탄 생산 (Bio-methane production for city gas by membrane separation of digestion gas)

  • 최근희;조민석;최원영;천승규
    • 한국응용과학기술학회지
    • /
    • 제37권5호
    • /
    • pp.1106-1115
    • /
    • 2020
  • 막 분리 운전방식에 따른 음폐수 소화가스의 도시가스용 바이오메탄 생산연구를 상업용 시설을 대상으로 수행하였다. 연구결과 바이오메탄의 순도는 4SBR과 3SDR 모두 98.9%를 달성할 수 있었다. 소화가스 내 메탄 회수율은 4SBR 88.1%, 3SDR 79.4%이었고, 처리 소화가스량 대비 바이오메탄 생산율도 4SBR이 53.5%로 3SDR의 49.4%보다 높았다. 그러나 막 분리시설에 공급되는 가스 중 반송가스의 비율은 4SBR이 56.5%로 3SDR 보다 두 배가량 컸으며, 이로 인해 최대 처리량에 있어서는 3SDR이 양호한 결과를 보였다. 따라서 소화가스 200 N㎥/day 이하는 4SBR, 240 N㎥/day 이상에서는 3SDR이 경제성이 좋은 것으로 판단되었다. 공정 운전변수들의 평균값 대비 운전 값들의 상대편차는 전반적으로 4SBR이 컸으며, 또한 주 운전조절 수단인 바이오메탄 인출압력 대비 주요 지표들의 상관관계에 있어서는 3SDR가 보다 직접적인 관계를 보여주었다.

혐기성 회분반응기에서 수소생산 시 최적 pH 산정에 관한 연구 (A Study for the Optimum pH of Hydrogen Production in Anaerobic Batch Reactor)

  • 전윤선;박종일;유승호;이태진
    • 대한환경공학회지
    • /
    • 제29권1호
    • /
    • pp.54-61
    • /
    • 2007
  • pH가 혐기성 수소 발효에 미치는 영향을 고찰하기 위해 배양기간 동안 pH를 $3\sim10$까지 일정하게 유지시킨 상태에서 수소생산 효율을 살펴보았다. 유입기질을 sucrose로 하여 생성된 가스는 이산화탄소와 수소였으며 메탄가스는 검출되지 않았다. 수정 Gompartz 방정식을 이용하여 수소가스 발생량$(P_h)$과 최대수소 생성율$(R_h)$을 회귀분석하였을 때 pH 5에서 수소가스 발생량$(P_h)$은 약 1182 mL이고 최대수소 생성율$(R_h)$은 112.46 mL/g dry wt biomass/hr이였다. 수소 전환율은 22.56%이였으며 butyrate/acetate 비가 pH 5에서는 1.63, pH 6에서는 0.38로 ratio값이 높은 pH 5에서 효율이 더 좋다는 것을 확인할 수 있었다. Haldane equation을 이용하여 비수소생산율을 산정해 본 결과 최대 비수소생산율은 119.61 mL/g VSS/hr이였고, 최대 비수소생산율을 나타내는 pH는 5.5로 판명되었다.

Hbr/O2 유도결합 플라즈마를 이용한 폴리실리콘 건식식각 (Dry Etching of Polysilicon in Hbr/O2 Inductively Coupled Plasmas)

  • 범성진;송오성;이혜영;김종준
    • 한국전기전자재료학회논문지
    • /
    • 제17권1호
    • /
    • pp.1-6
    • /
    • 2004
  • Dry etch characteristics of polysilicon with HBr/O$_2$ inductively coupled plasma (ICP) have been investigated. We determined etch late, uniformity, etch profiles, and selectivity with analyzing the cross-sectional scanning electron microscopy images obtained from top, center, bottom, right, and left positions. The etch rate of polysilicon was about 2500 $\AA$/min, which meets with the mass production for devices. The wafer level etch uniformity was within $\pm$5 %. Etch profile showed 90$^{\circ}$ slopes without notches. The selectivity over photoresist was between 2:1∼4.5:1, depending on $O_2$ flow rate. The HBr-ICP etching showed higher PR selectivity, and sharper profile than the conventional Cl$_2$-RIE.

고효율 LCD 감광막 제거기술 구현 연구 (A Study on the Realization of the High Efficiency LCD Photoresist Removal Technology)

  • 손영수;함상용;김병인;이성휘
    • 한국전기전자재료학회논문지
    • /
    • 제20권11호
    • /
    • pp.977-982
    • /
    • 2007
  • The realization of the photoresist(PR) removal method with vaporized water and ozone gas mixture has been studied for the LCD TFT array manufacturing. The developed PR stripper uses the water boundary layer control method based on the high concentration ozone production technology. We develop the prototype of PR stripper and experiment to find the optimal process parameter condition like as the ozone gas flow/concentration, process reaction time and thin boundary layer formation. As a results, we realize the LCD PR strip rate over the 0.4 ${\mu}m/min$ and this PR removal rate is more than 5 times higher than the conventional immersion type ozonized water process.

천궁의 세포배양에 의한 정유성분의 생산 (The Production of Essential Oils by Tissue Culture of Cnidium officinale)

  • 신승원;박봄뫼
    • 약학회지
    • /
    • 제38권2호
    • /
    • pp.179-183
    • /
    • 1994
  • Callus was derived from the shoots of Cnidium officinale. The growth rate of callus and the production of essential oils were studied under different culture conditions. The essential oils in the rhizome of Cnidium officinale and the cultivated callus were analyzed and compared by gas chromatography and mass spectrometry. It appeared that NAA induced higher growth rate and production of essential oils than 2,4-D. The compositions of essential oils were influenced by the illumination. Butyl phthalide, cnidilide, senkyunolide, butylidene phthalide, ligustilide, grandisol, tricosane, 3-methylphenol and 2-pentylthiophene were identified in the cultivated callus.

  • PDF

The Optimization of Hydrogen Reduction Process for Mass Production of Fe-8wt%Ni Nanoalloy Powder

  • Jung, Sung-Soo;Kang, Yun-Sung;Lee, Jai-Sung
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.1331-1332
    • /
    • 2006
  • The present investigation has attemped to optimize hydrogen reduction process for the mass production of Fe-8wt%Ni nanoalloy powder from ball milled $Fe_2O_3-NiO$ powder. In-situ hygrometry study was performed to monitor the reduction behavior in real time through measurement of water vapor outflowing rate. It was found that the reduction process can be optimized by taking into account the apparent influence of water vapor trap in the reactor on reduction kinetics which strongly depends on gas flow rate, reactor volume and reduction.

  • PDF

Modified glycine-nitrate process(MGNP)로 합성한 BaCo1-x-yFexZryO3-δ 산소투과도 및 수소생산성 (Oxygen Permeation and Hydrogen Production of BaCo1-x-yFexZryO3-δ by a Modified Glycine-nitrate Process (MGNP))

  • 이은정;황해진
    • 한국수소및신에너지학회논문집
    • /
    • 제24권1호
    • /
    • pp.29-35
    • /
    • 2013
  • A dense mixed ionic and electronic conducting ceramic membrane is one of the most promising materials because it can be used for separation of oxygen from the mixture gas. The $ABO_3$ perovskite structure shows high chemical stability at high temperatures under reduction and oxidation atmospheres. $BaCo_{1-x-y}Fe_xZr_yO_{3-{\delta}}$ (BCFZ) was well-known material as high mechanical strength, low thermal conductivity and stability in the high valence state. Glycine Nitrate Process (GNP) is rapid and effective method for powder synthesis using glycine as a fuel and show higher product crystallinity compared to solid state reaction and citrate-EDTA method. BCFZ was fabricated by modified glycine nitrate process. In order to control the burn-up reaction, $NH_4NO_3$ was used as extra nitrate. According to X-Ray Diffraction (XRD) results, BCFZ was single phase regardless of Zr dopants from y=0.1 to 0.3 on B sites. The green compacts were sintered at $1200^{\circ}C$ for 2 hours. Oxygen permeability, methane partial oxidation rate and hydrogen production ability of the membranes were characterized by using Micro Gas Chromatography (Micro GC) under various condition. The high oxygen permeation flux of BCFZ 1-451 was about $1ml{\cdot}cm^{-2}s^{-1}$. Using the humidified Argon gas, BCFZ 1-433 produced hydrogen about $1ml{\cdot}cm^{-2}s^{-1}$.

Phenolic Composition, Fermentation Profile, Protozoa Population and Methane Production from Sheanut (Butryospermum Parkii) Byproducts In vitro

  • Bhatta, Raghavendra;Mani, Saravanan;Baruah, Luna;Sampath, K.T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제25권10호
    • /
    • pp.1389-1394
    • /
    • 2012
  • Sheanut cake (SNC), expeller (SNE) and solvent extractions (SNSE) samples were evaluated to determine their suitability in animal feeding. The CP content was highest in SNSE (16.2%) followed by SNE (14.7%) and SNC (11.6%). However, metabolizable energy (ME, MJ/kg) was maximum in SNC (8.2) followed by SNE (7.9) and SNSE (7.0). The tannin phenol content was about 7.0 per cent and mostly in the form of hydrolyzable tannin (HT), whereas condensed tannin (CT) was less than one per cent. The in vitro gas production profiles indicated similar y max (maximum potential of gas production) among the 3 by-products. However, the rate of degradation (k) was maximum in SNC followed by SNE and SNSE. The $t^{1/2}$ (time taken for reaching half asymptote) was lowest in SNC (14.4 h) followed by SNE (18.7 h) and SNSE (21.9 h). The increment in the in vitro gas volume (ml/200 mg DM) with PEG (polyethylene glycol)-6000 (as a tannin binder) addition was 12.0 in SNC, 9.6 in SNE and 11.0 in SNSE, respectively. The highest ratio of $CH_4$ (ml) reduction per ml of the total gas, an indicator of the potential of tannin, was recorded in SNE (0.482) followed by SNC (0.301) and SNSE (0.261). There was significant (p<0.05) reduction in entodinia population and total protozoa population. Differential protozoa counts revealed that Entodinia populations increased to a greater extent than Holotricha when PEG was added. This is the first report on the antimethanogenic property of sheanut byproducts. It could be concluded that all the three forms of SN byproducts are medium source of protein and energy for ruminants. There is a great potential for SN by-products to be incorporated in ruminant feeding not only as a source of energy and protein, but also to protect the protein from rumen degradation and suppress enteric methanogenesis.

가스하이드레이트 개발생산과정에서의 미고결 퇴적층의 역학적 안정성 평가를 위한 지오메카닉스모델 해석 (Geomechanical Model Analysis for the Evaluation of Mechanical Stability of Unconsolidated Sediments during Gas Hydrate Development and Production)

  • 김형목;쟈니 루트비스트
    • 터널과지하공간
    • /
    • 제24권2호
    • /
    • pp.143-154
    • /
    • 2014
  • 본 연구에서는 지오메카닉스모델을 이용한 가스하이드레이트 회수 생산 과정에서의 해리 발생 및 이에 따른 주변 퇴적층의 역학적 변형을 시뮬레이션 하였다. 지오메카닉스모델은 TOUGH+Hydrate와 FLAC3D 해석 코드를 순차적으로 반복해석하는 기법으로 감압법을 이용한 가스하이드레이트 회수 생산과정에서의 온도, 압력, 포화도 변화가 생산정 주변 퇴적층 내 유효응력, 강성 및 강도 변화에 미치는 영향을 고려할 수 있는 특징이 있다. 회수생산 방식에 따른 모델해석결과 비교를 통해, 감압법과 열자극법을 병행하는 경우 초기 생산량 증대를 가져올 수 있음을 보였다. 또한, 미고결 점토질 퇴적층에서의 회수생산 시 사암층에 비해 상대적으로 변형이 크게 발생함을 보였다.