• Title/Summary/Keyword: gas hydrates

Search Result 122, Processing Time 0.024 seconds

A study on Thermodynamics Analysis of $CH_4+CO_2+H_2S$ Mixture Gas Hydrates ($CH_4$, $CO_2$, $H_2S$ 혼합기체 하이드레이트 특성분석)

  • Han, Kyuwon;Moon, Donghyun;Shin, Hyungjoon;Lee, Jaejung;Yoon, Jiho;Lee, Hyunghoon;Lee, Gangwoo
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2010.06a
    • /
    • pp.218.2-218.2
    • /
    • 2010
  • 저분자량의 가스와 물이 물리적 결합으로 이루어진 가스 하이드레이트는 상대적으로 많은 양의 가스가 포집될 수 있다는 특성을 이용하여 다양한 분야에서 활발한 연구가 진행되고 있다. 본 연구에서는 매립지에서 발생되는 매립가스를 하이드레이트의 원리를 이용하여 효율적으로 저장 및 수송하기위한 공정에 적용하기위해 필요한 매립지 가스 하이드레이트의 상평형에 대한 특성을 분석하고자한다. 일반적으로 매립지 가스에는 메탄이 약 50%, 이산화탄소가 약 35%, 질소가 약 6% 포함되어 있으며 그 밖에 산소, 수분, 암모니아 황화수소 메르캅탄 등 할로겐 계통을 포함한 탄화수소계화합물 수십여종이 포함되어 있다. 이러한 매립지가스를 하이드레이트화 하기위해서는 매립지가스에 포함된 다양한 성분들이 하이드레이트 형성에 미치는 영향을 알아볼 필요가 있다. 특히 황화수소의 경우 독성이 있으며, 실제 플랜트에서 장비의 부식등 악영향을 미치므로 이와 관련한 기초 연구가 필요하다. 따라서 본 연구에서는 메탄, 이산화탄소, 황화수소가 각각 49.9%, 50.05%, 500ppm의 조성으로 이루어진 혼합가스를 이용하여 하이드레이트 생성 및 해리 시 거동을 측정하고 그 상평형 영역을 기존데이터와 비교분석 하였다. 25bar, 36bar에서 측정한 상평형 데이터는 한국해양대학교 에서 측정한 결과와 마찬가지로 실제 상평형 영역이 CSMHYD 프로그램으로 예측한 것보다 하이드레이트의 안정영역이 약 2bar 정도 높게 형성되는 것을 확인하였으며, $CH_4+CO_2+H_2S$ 혼합가스 하이드레이트의 생성 시 mol consumption은 $CH_4+CO_2$ 혼합가스 하이드레이트와 유사하게 나타났다. 이 결과로 유추하건대, 황화수소의 첨가는 하이드레이트의 형성 압력을 높이지만, 하이드레이트 형성률에는 크게 영향을 미치지 않는다고 할 수 있다.

  • PDF

Phase Equilibria and Formation Behaviors of Methane Hydrate with Ethylene Glycol and Salts (에틸렌글리콜과 염이 포함된 메탄 하이드레이트의 상평형과 형성 거동)

  • Kim, Dong Hyun;Park, Ki Hun;Cha, Minjun
    • Korean Chemical Engineering Research
    • /
    • v.58 no.4
    • /
    • pp.635-641
    • /
    • 2020
  • In this study, phase equilibria and formation behaviors of methane hydrate containing mono-ethylene glycol (MEG) and salts (sodium chloride, NaCl; sodium bromide, NaBr; sodium iodide, NaI) are investigated. Equilibrium conditions of methane hydrate containing MEG and salts are measured in a temperature range 272~283 K and a pressure range 3.5~11 MPa. Hydrate inhibition performance in the presence of additives can be summarized as follows: methane hydrate containing (5 wt% NaCl + 10 wt% MEG) > (5 wt% NaBr + 10 wt% MEG) > (5 wt% NaI + 10 wt% MEG). Formation behaviors of methane hydrate with MEG and salts are investigated for analyzing the induction time, gas consumption amount and growth rate of methane hydrates. There are no significant changes in the induction time during methane hydrate formation, but the addition of MEG and salts solution during hydrate formation can affect the gas consumption amount and growth rate.

P-wave Velocity Analysis Around the BSR Using Wide-angle Ocean-bottom Seismic Data (해저면 광각 탄성파 탐사자료를 이용한 BSR 부근의 P파 속도 분석)

  • Kim, Byoung-Yeop;Byun, Joong-Moo
    • Geophysics and Geophysical Exploration
    • /
    • v.12 no.2
    • /
    • pp.173-182
    • /
    • 2009
  • In April 2008, KIGAM carried out an ocean-bottom seismometer (OBS) survey in the central Ulleung Basin where strong bottom simulating reflectors (BSRs) were revealed from previous surveys and some gas-hydrate samples were retrieved by direct sampling. The purpose of this survey is to estimate the velocity structure near the BSR in the gas hydrate prospect area using wide-angle seismic data recorded on the ocean-bottom seismometers. Along with the OBS survey, a 2-D seismic survey was performed whereby stratigraphic and preliminary velocity information was obtained. Two methods were applied to wide-angle data for estimating P wave velocity; one is velocity analysis in the $\tau$-p domain and the other is seismic traveltime inversion. A 1-D interval velocity profile was obtained by the first method, which was refined to layered velocity structure by the latter method. A layer stripping method was adopted for modeling and inversion. All velocity profiles at each OBS site clearly show velocity reversal at BSR depths due to the presence of gas hydrates. In addition, we could confirm high velocity in the column/chimney structure.

Research on manufacturing secondary construction products using in-situ carbonation technology (In-situ 탄산화 기술이 적용된 콘크리트 2차제품 제조 연구)

  • Hye-Jin Yu;Sung-Kwan Seo;Woo-Sung Yum
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.33 no.6
    • /
    • pp.226-233
    • /
    • 2023
  • In this study, the basic physical properties and microstructure of concrete interlocking blocks with amount of different CO2 gas injection were analyzed according to determine the applicability of In-situ carbonation technology to construction secondary products. The amount of carbon dioxide gas injection was selected as 0, 0.1, 0.3, 0.5, 0.7 wt.% compared to cement amount. A lab-scale press equipment was designed to apply developed carbonation technology to real construction site. And mixer for stable CO2 gas injection was designed. Using the designed devices, CO2 gas injected samples were created and physical property of samples were performed. As a result of the physical property test, as the CO2 injection amount increased to 0.3 %, it showed higher strength behavior compared to the original mix. And more than 0.5 % samples showed lower strength behavior than original sample, but they satisfied the standard of concrete interlocking block. This results were determined that CO2 injection contributed to the creation of hydrates such as C-S-H. Therefore, the possibility of applying carbonation technology, which injects CO2 during mixing, to various secondary construction products was confirmed.

Acoustic Characteristics of Gas-related Structures in the Upper Sedimentary Layer of the Ulleung Basin, East Sea (동해 울릉분지 퇴적층 상부에 존재하는 가스관련 퇴적구조의 음향 특성연구)

  • Park, Hyun-Tak;Yoo, Dong-Geun;Han, Hyuk-Soo;Lee, Jeong-Min;Park, Soo-Chul
    • Economic and Environmental Geology
    • /
    • v.45 no.5
    • /
    • pp.513-523
    • /
    • 2012
  • The upper sedimentary layer of the Ulleung Basin in the East Sea shows stacked mass-flow deposits such as slide/slump deposits in the upper slope, debris-flow deposits in the middle and lower slope, and turbidites in the basin plain. Shallow gases or gas hydrates are also reported in many area of the Ulleung Basin, which are very important in terms of marine resources, environmental changes, and geohazard. This paper aims at studying acoustic characteristics and distribution pattern of gas-related structures such as acoustic column, enhanced reflector, dome structure, pockmark, and gas seepage in the upper sedimentary layer, by analysing high-resolution chirp profiles. Acoustic column shows a transparent pillar shape in the sedimentary layer and mainly occurs in the basin plain. Enhanced reflector is characterized by an increased amplitude and laterally extended to several tens up kilometers. Dome structure is characterized by an upward convex feature at the seabed, and mainly occurs in the lower slope. The pockmark shows a small crater-like feature and usually occurs in the middle and lower slope. Gas seepage is commonly found in the middle slope of the southern Ulleung Basin. These gas-related structures seem to be mainly caused by gas migration and escape in the sedimentary layer. The distribution pattern of the gas-related structures indicates that formation of these structures in the Ulleung Basin is controlled not only by sedimentary facies in upper sedimentary layer but also by gas-solubility changes depending on water depth. Especially, it is interpreted that the chaotic and discontinuous sedimentary structures of debris-flow deposits cause the facilitation of gas migration, whereas the continuous sedimentary layers of turbidites restrict the vertical migration of gases.

Comparison on the Energy Consumption of the Vacuum Evaporation and Hydrated-Based Technologies for Concentrating Dissolved Ions (용존 이온 농축을 위한 진공 증발 기술과 하이드레이트 기반 기술의 소모 에너지 비교)

  • Han, Kunwoo;Rhee, Chang Houn;Ahn, Chi Kyu;Lee, Man Su
    • Korean Chemical Engineering Research
    • /
    • v.57 no.3
    • /
    • pp.378-386
    • /
    • 2019
  • In the present paper we report the calculation results of operation energy consumption for dissolved ions concentration technologies using vacuum evaporation (VE) and hydrate formation. Calculations were conducted assuming the tenfold concentration of saline water (0.35 wt% NaCl solution) of 1 mol/s at room temperature and atmospheric pressure employing vacuum evaporation at $69^{\circ}C$ and 30 kPa and hydrate-based concentration using $CH_4$, $CO_2$ and $SF_6$ as guest molecules. Operation energy consumption of VE-based concentration resulted in 47 kJ/mol, whereas those of hydrate-based concentration were 43, 32, and 28 kJ/mol for $CH_4$, $CO_2$ and $SF_6$ hydrates, respectively. We observe that hydrate-based concentration can a competitive option for dissolved ions recovery from energy consumption standpoint. However, the selection of guest gas is very critical, since it accordingly determines the hydration number, the hydrate formation energy, gas compression energy, etc. The selection of guest gas, separation of concentrated brine and water phases, and the enhancement of hydrate formation rate are the key factors for the commercialization of hydrated-based technology for concentrating dissolved ions.

Carbonization of Coal-Fly Ash Containing High CaO Compound (CaO 화합물이 다량 함유된 비산재의 탄산화)

  • Sim, Jun Soo;Lee, Ki Gang;Kim, Yu Taek;Kang, Seung Ku
    • Journal of the Korean Ceramic Society
    • /
    • v.50 no.1
    • /
    • pp.18-24
    • /
    • 2013
  • This study was conducted to recycle fly ash containing an abundance of CaO generated from combustion in a circulating layer as a carbon storage medium. The study utilized XRD, TG-DTA and XRF analyses during the hydration of fly ash and identified calcium substances within fly ash that could be used in a carbonation process. $Ca^{2+}$ ions in the calcium substances were easily converted to hydrates. A carbonation experiment was done, which used the method of $CO_2$ gas injection to produce suspensions by mixing fly ash with distilled water. The results were analyzed using TG-DTA, XRD, and pH meter measurements. The study was able to verify that the reaction was completed at a $CO_2$ flow rate of 300cc/min approximately 30 minutes after an injection into a solution with a solid-liquid ratio of 1 : 10 of fly ash and distilled water. Moreover, the stirring time of the suspensions did not influence the reaction, and the reaction time was found to diminish as the portion of the fly ash became smaller. Thus, this study produced carbon storage fly ash having a $CO_2$ storage rate of about 71% through the utilization of the CaO content contained within fly ash.

Identification of Quaternary Faults and shallow gas pockets through high-resolution reprocessing in the East Sea, Korea (탄성파 자료 고해상도 재처리를 통한 동해해역의 제4기 단층 및 천부 가스 인지)

  • Jeong, Mi Suk;Kim, Gi Yeong;Heo, Sik;Kim, Han Jun
    • Journal of the Korean Geophysical Society
    • /
    • v.2 no.1
    • /
    • pp.39-44
    • /
    • 1999
  • High-resolution images are drawn from existing seismic data which were originally obtained by Korea Ocean Research & Development Institute (KORDI) during 1994-1997 for deep seismic studies on the East Sea of Korea. These images are analyzed for mapping Quaternary faults and near-bottom gas pockets. First 12 channels are selected from shot gathers for reprocessing. The processing sequence adopted for high-resolution seismic images comprises data copy, trace editing, true amplitude recovery, common-midpoint sorting, initial muting, prestack deconvolution, bandpass filtering, stacking, highpass filtering, poststack deconvolution, f-x migration, and automatic gain control (AGC). Among these processing steps, predictive deconvolution, highpass filtering, and short window AGC are the most significant in enhancement of resolution. More than 200 Quaternanry faults are interpreted on the migrated sections in the shallow depths beneath the seafloor. Although numerous faults are found mostly at the western continental slope and boundaries of the Ulleung Basin, significant amount of the faults are also indicated within the basin. Many of these faults are believed to be formed with reactivation of basement, from geotectonic activities including volcanism, and often originated in Tertiary, indicating that the tectonic regime of the East Sea might be unstable. Existence of shallow gas pockets casts real hazardous warnings to deep-sea drillings and/or to underwater constructions such as inter-island cables and gas pipelines. On the other hand, discovery of these gas pockets heightens the interests in developing natural resources in the East Sea. Reprocessed seismic sections, however, show no typical seismic characteristics for gas hydrates such as bottom-simulating reflectors in the western continental slope and ocean floor.

  • PDF

Seismic attenuation from VSP data in methane hydrate-bearing sediments (메탄 하이드레이트 부존 퇴적층으로부터 획득한 수직탄성파 (VSP) 자료에서의 탄성파 진폭 감쇠)

  • Matsushima, Jun
    • Geophysics and Geophysical Exploration
    • /
    • v.10 no.1
    • /
    • pp.29-36
    • /
    • 2007
  • Recent seismic surveys have shown that the presence of methane hydrate (MH) in sediments has significant influence on seismic attenuation. I have used vertical seismic profile (VSP) data from a Nankai Trough exploratory well, offshore Tokai in central Japan, to estimate compressional attenuation in MH-bearing sediments at seismic frequencies of 30-110 Hz. The use of two different measurement methods (spectral ratio and centroid frequency shift methods) provides an opportunity to validate the attenuation measurements. The sensitivity of attenuation analyses to different depth intervals, borehole irregularities, and different frequency ranges was also examined to validate the stability of attenuation estimation. I found no significant compressional attenuation in MH-bearing sediments at seismic frequencies. Macroscopically, the peaks of highest attenuation in the seismic frequency range correspond to low-saturation gas zones. In contrast, high compressional attenuation zones in the sonic frequency range (10-20 kHz) are associated with the presence of methane hydrates at the same well locations. Thus, this study demonstrated the frequency-dependence of attenuation in MH-bearing sediments; MH-bearing sediments cause attenuation in the sonic frequency range rather than the seismic frequency range As a possible reason why seismic frequencies in the 30-110 Hz range were not affected in MH-bearing sediments, I point out the effect of thin layering of MH-bearing zones.

Biogeochemistry of Methane in Water and Sediment: Methane Generation in Coastal Areas with Bottom Water Hypoxia (메탄의 생지화학적 거동과 한국 연안해역 저(빈)산소 층 발달에 따른 메탄 생성)

  • DONGJOO JOUNG
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.28 no.3
    • /
    • pp.95-120
    • /
    • 2023
  • Methane (CH4) is a key greenhouse gas in the atmosphere with 85 times greater greenhouse potent relative to carbon dioxide (CO2). The atmospheric concentration of CH4 is rapidly increasing due to the intensive usage of CH4 and the thawing of the cryosphere. Additionally, with the current warming of ocean water, the dissociation of gas hydrates, an ice-like compound and the largest reservoir of CH4 on Earth, is expected to occur, resulting in the release of CH4 from the seafloor into the overlying water and atmosphere. Moreover, bottom water hypoxia is another concern that potentially introduces greenhouse gases into the atmosphere. With ongoing global warming and eutrophication, the size and duration of bottom water hypoxia are rapidly increasing. These low-oxygen conditions would relocate the redox zone shallower in sediment or in the water column, causing the release of CH4 into the atmosphere and thereby intensifying global warming. However, there exists a gap in the understanding of CH4 dynamics including its generation in relation to bottom water hypoxia. Therefore, this review article aims to understand the relationship between CH4 and bottom water hypoxia and to draw attention to CH4 investigation in Korea.