• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.855-865
• /
• 2001

The optimization condition of injection molding for a commercial product of TV speaker grille of A Company was induced using a CAE software of Moldflow. The flow and packing phase analysis was performed by using flow balance, runner balance, and the intermediate one by using the above two balances, which were used for controlling the amount of packing resins into the cavity, Later, the analysis performed by using the measured viscosity (local database) at various shear rates and the results were compared with the computer simulation using the standard database. Flow balance induced minimized weld line resulted in a better appearance and physical properties of the were line, but exhibited a disadvantage of large deformation and gas formation due to over-packing of the molten resin in the center of the speaker grille. Runner balance improved the disadvantage of the flow balance by controlling the amount of molten resin injected from the gate, however resulted reduced mechanical properties and poor appearance of the weld line. However, the modified method induced from the flow and runner balance improved the disadvantages by changing the runner size. In addition, the analyses based on the local database and the standard database were compared. Although the measured viscosity was slightly higher and the temperature distribution was broader than the standard database, no distinct difference was obtained from the analysis using the two different databases.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2010

To enhance the transport properties of gas separation membrane, we prepared 6FDA-6FpDA based polyimide membrane with PMMA-graft-silica nanoparticles. The silica was grafted PMMA which is miscible with 6FDA-based polyimide after surface treatment by 3-methacryloxypropyltrimethoxysilane ($\gamma$-MPS). The untreated silica/6FDA-6FpDA membrane showed greater permeability and less selectivity than PMMA-g-silica/6FDA-6FpDA due to its low dispersion. The transport properties of PMMA-g-silica/6FDA-GFpDA membrane were measured as a function of filler concentration. These membranes were evaluated using pure gases (He, $O_2$, $N_2$, $CO_2$). The increase in permeation was attributed to changes in the free volume distribution until 1 wt%. After 1 wt%, the permeability was decreased by excess silica which decreased effective area in polymer matrix. The selectivity was decreased with increasing permeability on the whole. However, the selectivity of $CO_2$ showed more enhance value.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.867-874
• /
• 2000

Kochujang, which is one of most favorable fermented hot seasonings in Korea, has swelling problem and color changes during distribution. To stop the gas formation, heat treatments were conducted at $50^{\circ}C\;to\;70^{\circ}C$ for 5 to 15 min. at the beginning or after 40 days fermentation. Yeast were not detected at $60^{\circ}C$ for 15min. heat treatment and bacteria were not effected in number that is concerned in fermentation of kochujang. At above heat treatment, there was no effect ${\alpha}-amylase$ but ${\beta}-amylase$ activity was increased in heat treated kochujang. The acid protease activity was higher than nonheat treated kochujang after 60 days fermentation but neutral protease decreased after 80 days fermentation. The L, a and b value by Hunter were gradually decreased during fermentation and ${\Delta}E$ value showed difference in kochujang heated before fermentation. The total hydroxy methyfurfural content was increased, and carotenoid and capsanthin in heated kochujang decreased during fermentation.

• Journal of the Korean earth science society
• /
• v.33 no.1
• /
• pp.39-48
• /
• 2012

In this study, a statistical estimation of probable precipitation and an analysis of its return period in Busan were performed using long-term precipitation data (1973-2007) collected from the Busan Regional Meteorological Administration. These analyses were based on the method of probability weighted moments for parameter estimation, the goodness-of-fit test of chi-square ($x^2$) and the probability plot correlation coefficient (PPCC), and the generalized logistics (GLO) for optimum probability distribution. Moreover, the spatial distributions with the determination of probable precipitation were also investigated using precipitation data observed at 15 Automatic Weather Stations (AWS) in the target area. The return periods for the probable precipitation of 245.2 and 280.6 mm/6 hr with GLO distributions in Busan were estimated to be about 100 and 200 years, respectively. In addition, the high probable precipitation for 1-, 3-, 6-, and 12-hour durations was mostly distributed around Dongrae-gu site, all coastal sites in Busan, Busanjin and Yangsan sites, and the southeastern coastal and Ungsang sites, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.351-359
• /
• 1996

We have investigated the effect of hydrogen plasma on the formation of InAs QDs (quantum dots) structure by using a CBE (chemical beam epitaxy)system equipped with ECR (electron cyclotron resonance) plasma source. It is confirmed that the formation of self-organized InAs-QDs on GaAs is started after the growth of InAs layer up to 2.6 ML (monolayer) with the irradiation of hydrogen plasma while it is started after 1.9 ML without hydrogen gas and hydrogen plasma through the observation of RHEED patterns. Density and size of the QDs formed at $T_{sub}=370^{\circ}C$ are $1.9{\times}10^{11}cm^{-2}$ and 17.7 nm without hydrogen plasma, and $1.3{\times}10^{11}cm^{-2}$ and 19.4 nm with hydrogen plasma, respectively. It is also observed from the PL(photoluminescence) measurement on InAs-QDs that red shift in PL peak energy and broadening in FWHM (full width at half maximum)of PL peak caused by the effects of hydrogen plasma on the increment of size and its distribution. These effects of hydrogen plasma are considered as a act of atomic hydrogen which enhances the layer-growth of InAs on GaAs resulted from the relief of misfit strain between GaAs substrate and InAs.

• Journal of the Korean earth science society
• /
• v.25 no.4
• /
• pp.214-221
• /
• 2004

The purpose of this study is to inquire into the effects of teaching methods in the class on the conceptual change of atmospheric pressure for middle school students. After analyzing the concept of atmospheric pressure in the middle school science textbooks on the present 7th Curriculum, classes were performed adopting classified Method A and Method 3. For Method A, the textbook is used to explain the concept in the view of weight. For Method B, the textbook is used to approach the concept in the views of molecular movement as well as of weight. This study consists of four classes in the third grade students of middle school in Busan, where they were divided into the Method A group and the Method B group. These study was carried out with pre-post on each of these classes on the learning achievement and on the conceptual change of atmospheric pressure. The results of this study were as follows: First, the effect on the learning achievement was displayed the average score of the Method B was showing a meaningful difference comparing to the Method A. Second, the effect on the conceptual change measured by verifying the score for the difference among the averages for each sub-scale three out of four conceptual factors,'the direction of atmospheric influence and the reason','the principle of atmospheric action' and 'the atmospheric changes by the temperature rise on the surface of the earth and the reason', showed meaningful improvement. But, the one left factor,'the distribution of atmospheric pressure by altitudes and the reason', displayed no meaningful difference. Third, The concept of atmospheric pressure is better defined as the pressure created by the movement of air particles, in the view of kinetic theory of gas, rather than explained by the notion of the weight of air.

• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.238-246
• /
• 2016

The study aims to examine Japan's National REDD+ Strategies prepared for Post-2020 and the status of its implementation by organizations in Japan, and then to suggest the potential REDD+ countermeasures against Joint Credit Mechanism (JCM) for Republic of Korea and their implications. As for the technical limitations of the guidelines of REDD+ under the JCM, it is pointed out that forests located at the place with less potential safeguard intervention tend to be selected as the target area for a project and that, as reference emission trend changes depending on the basic year of the baseline, differences could occur among the amounts of greenhouse gas emission. In addition, it is pointed out that the result of the calculation of the displacement of emissions, or leakeage, in REDD+, can have an uncertainty, since the calculation is done by just multiplying leakage area by certain coefficients, without considering the size of the leakage area. Furthermore, the lack of implementation guideline or methodologies for a project level is also pointed out as a limitation, considering that there are only some national and sub-national monitoring guidelines at present. Finally, internationally accepted guidelines for safeguard and its sub-items needed to be prepared, as current safeguard policy only includes lists without detailed items. Such things mentioned above are all related to, and can lead to the problem of double counting of items in Nested Approach etc., as well as of the distribution of credits. Therefore, Republic of Korea should take these into consideration when implementing its REDD+ projects.

• Journal of Korean Society of Forest Science
• /
• v.107 no.2
• /
• pp.140-150
• /
• 2018

For the estimation of greenhouse gas dynamics in forests, it is useful to use a model which simulates both carbon (C) and nitrogen (N) cycle simultaneously. A forest C model, called FBDC, was developed and validated in Korea. However, studies on development of forest N model are insufficient. This study aimed to suggest a development process of a forest C and N model. We analyzed the general features, structures, ecological processes, input data, output data, and methods of integrating C and N cycles of the VISIT, Biome-BGC, Forest-DNDC, and O-CN. The structure and features of the FBDC were also analyzed. The VISIT was developed by integrating forest C model with a N cycle module, and the new model also could be designed by combining the FBDC with a N cycle module. The VISIT and Forest-DNDC could estimate soil $N_2O$ emissions, and the integrated model should include the processes shared by these models. Especially, the overseas models linked C and N cycles based on N absorption, C absorption, and decomposition of dead organic matter. Therefore, the integration of the FBDC with N cycle module should apply this linkage of structures between C and N cycles. Climate, soil texture, and species distribution data, which are essential for the model development, were available in Korea. However, parameter data associated with N cycle and validation data for soil $N_2O$ emissions need to be obtained by field studies.

• Journal of Preventive Medicine and Public Health
• /
• v.18 no.1
• /
• pp.1-11
• /
• 1985

A decade ago a survey on the population-base incidence rate of anthracite coal gas (mainly carbon monoxide) poisonig in Seoul area was investigated, resulting in the incidence rate of 306/10,000 risk population and 1 death/10,000. Another survey on the carbon monoxide poisoning was investigated during 1 year period from Apr. 1983 to Mar. 1984. Total subjects of risk population were 67,740 households covering 353,287 persons. The major findings of this survey are as follows: 1. Household-base incidence rate was 8.4% spell-base 10.4%. 2. The incidence rate was the highest in houses having each of slate roof, cement wall, vinyl floor of bedroom and direct 'ondol' heating system. 3. Average 2.1 person was attacked from one incidence of the poisoning; severity-wise person-base incidence rates per 10,000 were 352 in mild poisoning, 54 in severe poisoning and 1.4 in death-overall incidence rate 407. Several facts were identified which supported that this figure was moderately underestimated. As the incidence of the poisoning is affected by socioeconomic and environmental factors, it is natural that one expects the incidence will decrease in proportion to genernal improvement of the above factors. Thus the results of these two surveys seemed preposterous. But further study suggested that the incidence rate (306/10,000) decade before had been significantly underestimated and corrected-rate should have been 478/10,000 level. 4. Age and sex distribution by the degree of the poisoning was uniform with little statistical difference; overall incidence rates by sex were 339/10,000 in male and 475/10,000 in female with significant statistical difference(p<.01). 5. 5.3% of the patients were treated at hospital or local clinic; 3.0% of the patients were hospitalized. Admission rate in comatose patient(severe poisoning) was 14.2%. In conclusion, carbon monoxide poisoning remains a major health problem by now.

• Nuclear Engineering and Technology
• /
• v.38 no.2
• /
• pp.163-174
• /
• 2006

The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.