• Journal of radiological science and technology
• /
• v.43 no.5
• /
• pp.375-382
• /
• 2020

PET/CT is a medical equipment that detects 0.511 MeV of gamma rays. The radiation workers are inevitably exposed to ionizing radiation in the process of handling the isotope. Accordingly, PET/CT workers use syringe shields made of lead and tungsten to protect their hands. However, lead and tungsten are known to generate very high scattering particles by interacting with gamma rays. Therefore, in this study, we tried to find out the effect on the scattering particles emitted from the syringe shield. In the experiment, first, the exposure dose to the hand (Rod phantom) was evaluated according to the metal material (lead, tungsten, iron, stainless steel) using Monte Carlo simulation. The exposure dose was compared according to whether or not plastic is attached. Second, the exposure dose of scattering particles was measured using a dosimeter and lead. As a result of the experiment, the shielding rate of plastics using the Monte Carlo simulation showed the largest difference in dose of about 40 % in lead, and the lowest in iron, about 15 %. As a result of the dosimeter test, when the plastic tape was wound on lead, it was found that the reduction rate was about 15 %, 28 %, and 39 % depending on the thickness. Based on the above results, it was found that 0.511 MeV of gamma ray interacts with the shielding tool to emit scattered rays and has a very large effect on radiation exposure. However, it was considered that the scattering particles could be sufficiently removed with plastics with a low atomic number. From now on, when using high-energy radiation, the shielding tool and the skin should not be in direct contact, and should be covered with a material with a low atomic number.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.1
• /
• pp.34-49
• /
• 1984

The stability of machine tool systems is analyzed by considering the machining process as a stochastic process without decomposing into machine tool structural dynamics and cutting processes. In doing so the time series analysis technique developed by Wu and Pandit is applied systematically to the relative vibration between cutting tool and work- piece measured under actual working conditions. Various characteristic properties derived from the fitted ARMA(Autoregressive Moving Average) Models and those from raw data directly are investigated in relation with the system stability. Both damping ratio and absolute value of the characteristic roots of the AR part of the most significant dynamic mode are preferred as stability indicating factors to the other pro-perties such as theoretical variance .gamma. (o) or absolute power of the most dominant dynamic mode. Maximum aplitude during a certain interval and variance estimated from raw data are shown to be very sensi- tive to the type of the signal and the location of measurement point although they can be obtained rather easily. The relative vibration signal is also analyzed by FFT(Fast Fourier Transform) Analyzer for the purpose of comparison with the spectrums derived from the fitted ARMA models.

• Journal of Life Science
• /
• v.24 no.11
• /
• pp.1174-1179
• /
• 2014

This research was carried out to evaluate whether gamma ray is a useful tool for breeding new strains of mushrooms. For this research, 5 mutant groups, 20 strains of Hypsizigus marmoreus, 2 strains of Lyophyllum decastes, and 1 strain of Lyophyllum shimeji were used. Monokaryon spores from one variety of H. marmoreus were irradiated with 50~2,000 Gy of gamma ray. The propriety dose was 50~200 Gy for mutagenesis. Mutant monokaryon mycelia crossed each order to become dikaryon mycelia. The internal transcribed spacer (ITS) regions of rDNA were amplified using PCR, and the products were sequenced. The sequences of the ITS regions (16 partial rDNA, complete ITS1, 5.8 rDNA and partial rDNA) were analyzed by PCR, and strains of H. marmoreus, L. decastes, and L. shimeji were auto-sequenced. The lengths of the sequenced ITSs were 1,052~1,143 nucleotides. Genetic matrices were calculated using Nei-Li's genetic distance coefficient based on ITS sequence. The dissimilarities were 0~3.35% in strains of H. Hypsizigus. In addition, a phylogenetic tree was constructed based on ITS sequences using the neighbor-joining (NJ) method. The phylogenetic tree revealed that 23 strains and 5 mutant groups were divided into 12 clusters; the mutant groups fell into different clusters. These results show that mushroom spores were mutated effectively by gamma ray; therefore, gamma ray could be a useful tool for breeding new strains of mushrooms.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.123-127
• /
• 2016

In this study, gamma radiation detectors are created by integrating the following combinations of different YSO scintillators and PMT(photomultiplier-tubes) respectively: $3mm{\times}3mm{\times}2mm$, $3mm(Dia){\times}15mm$, $3mm(Dia){\times}20mm$, $10mm(Dia){\times}20mm$. In addition, the scintillator with a 10mm diameter was integrated with a light guide with a 2mm thickness, 10mm entry and 3mm exit, using LightTools. The constructed detector used the standard gamma ray sources $^{137}Cs$(662keV) to analyze the spectral characteristics of gamma rays. The results indicate that at 662keV, the energy resolutions were 14.46%, 21.10%, and 10.71% for the first three combinations respectively. The best results were recorded for the $10mm(Dia){\times}20mm$ detector with light guide, which had an energy resolution of 7.48%.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2072-2077
• /
• 2020

The purpose of this study was to demonstrate the feasibility of sensing changes in a tumor during boron neutron capture therapy (BNCT) using a Monte Carlo simulation tool. In the simulation, an epi-thermal neutron source and a water phantom including boron uptake regions (BURs) were simulated. Moreover, this simulation also included a detector for positron emission tomography (PET) scanning and an adaptively-designed collimator (ADC) for PET. After the PET scanning of the water phantom, including the 511 keV source in the BUR, the ADC was positioned in the PET's gantry. Single prompt gamma rays were collected through the ADC during neutron irradiation. Then, single prompt gamma ray-based tomography images of different sized tumors were acquired by a four-step process. Both the signal-to-noise ratio (SNR) and tumor size were analyzed from each step image. From this analysis, we identified a decreasing trend of both the SNR and signal intensity as the tumor size decreased, which was confirmed in all images. In conclusion, we confirmed the feasibility of sensing changes in a tumor during BNCT using PET and an ADC through Monte Carlo simulation.

• Biomedical Science Letters
• /
• v.12 no.2
• /
• pp.105-112
• /
• 2006

This study was undertaken to investigate the morphological changes between normal and atretic follicle after gamma irradiation and treatment of follicle stimulating hormone (FSH). The ovaries of each group of treated immature mice were prepared the paraffin sections after 0, 6, 12, and 24 hours (hrs) of those treatment. Hematoxylin-eosin (HE) stain, reticulin stain, and terminal deoxynucleotidyl transferase (TdT)-mediated dUTP nick end labeling (TUNEL) immunohistochemical stain were performed on the each paraffin sections. As the results of HE staining, the condensed nuclei of oocytes were observed in the atretic primordial follicles, on the other hand the condensations of granulosa cell nuclei were prominent in the atretic primary, preantral, and antral follicles. Only the granulosa cells of atretic follicle were stained specifically with TUNEL staining but not stained in the theca cells, which suggested granulosa cells degenerated through apoptosis. In the reticulin staining, the basement membranes of atretic follicle which was stained weakly showed irregular structure and detachment from the follicles. The ratio of normal to atretic follicle in control and FSH treated group was about 33% but this ratio increased rapidly over 90% in the 6, 12, and 24 hrs group after the irradiation. It could be suggested that the gamma irradiation is the useful tool far the induction of follicle atresia and immunohistochemical staining methods are essential in the study of follicle atresia.

• Structural Engineering and Mechanics
• /
• v.54 no.2
• /
• pp.319-336
• /
• 2015

Life cycle performance of corrosion affected RC structures is an important and challenging issue for effective infrastructure management. The accurate condition assessment of corroded RC structures mainly depends on the effective evaluation of deterioration occurring in the structures. Structural performance deterioration caused by reinforcement corrosion is a complex phenomenon which is generally uncertain and non-decreasing. Therefore, a stochastic modelling such as the gamma process can be an effective tool to consider the temporal uncertainty associated with performance deterioration. This paper presents a time-dependent reliability analysis of corrosion affected RC structures associated bond strength degradation. Initially, an analytical model to evaluate cracking in the concrete cover and the associated loss of bond between the corroded steel and the surrounding cracked concrete is developed. The analytical results of cover surface cracking and bond strength deterioration are examined by experimental data available. Then the verified analytical results are used for the stochastic deterioration modelling, presented here as gamma process. The application of the proposed approach is illustrated with a numerical example. The results from the illustrative example show that the proposed approach is capable of assessing performance of the bond strength of concrete structures affected by reinforcement corrosion during their lifecycle.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.35-40
• /
• 2008

A distillation tower is one of the important facilities which separates and refines a crude oil stream according to certain boiling points. Its operation efficiency can affect the productivity of a refinery substantially. The objective of this study is to elucidate some operational information on the internal conditions of a distillation tower from a measurement of density profile by using a sealed gamma-ray source and a radiation detector. Gamma radiation counts were measured by a BGO detector positioned diametrically outside the tower-wall, opposite to the gamma source(Co-60) as the detector and the source were lowered concurrently. From the results, structural abnormality of the trays was not found inside the tower. Considering the flow distribution patterns, however, a vapor phase was dominantly formed at the upper part of the tower and a liquid phase at the lower part. From the gamma scanning of the distillation tower, it is anticipated that the gamma absorption technique can be used as an important tool for confirming the structural soundness of trays and investigating flow distribution in refinery facilities.

• Journal of the Korean Society for Heat Treatment
• /
• v.2 no.4
• /
• pp.27-39
• /
• 1989

The effect of gas mixing ratios during gas nitrocarburizing treatment on the formation of compound layer and the mechanical properties has been studied for hot work tool steel by using a combined heat treating technique. The thickness of compound and diffusion layers has been shown to grow as a parabolic relation with increasing the amount of ammonia at a given flow quantity of $CO_2$ gas. The compound layer consists mainly of ${\varepsilon}-Fe_3$(C, N) with small amounts of ${\gamma}^{\prime}-Fe_4N$ and ${\alpha}$-Fe. The combined heat treated hot work tool steel has shown that the thickness of compound layer increases with increasing nitrocarburizing time, but the rate of growth slows down as gas nitrocarburizing time goes more than two hours. Tensile properties have given a remarkable improvement. In particular, the wear resistance of combined heat treated hot work tool steel has exhibited an improvement of about 165% greater than that obtained from conventional quenching and multi-tempering treatments.

• Advances in aircraft and spacecraft science
• /
• v.2 no.1
• /
• pp.1-16
• /
• 2015

In this paper, geometrical and mechanical approaches are proposed for the simulation of the draping of woven fabric onto complex parts. The geometrical discrete approach allows to define the ply shapes and fibres orientation in order to optimize the composite structural properties and the continuum meso-structural mechanical approach allows to take into account the mechanical properties of fibres and resin and the various dominating mode of deformation of woven fabrics during the forming process. Some numerical simulations of forming process are proposed and compared with the experimental results in order to demonstrate the efficiency of our approaches.